Study on Morphology, Microstructure and Properties of 6063-T6 Aluminum Alloy Joints in MIG Welding
Source abstract
Abstract
In this paper, a metal inert gas (MIG) shielded welding method was used for high-quality welding of 6063-T6 aluminum alloy sheet with a thickness of 2.5 mm. The welding process of MIG welding was accurately simulated and the welding temperature field and thermal cycle curve were calculated using a combination of Gaussian body heat source and double ellipsoidal heat source. As the welding current increased from 75 A to 90 A, the reinforcing phase precipitated under the microstructure of the joint gradually became larger and re-solidified into the body, resulting in a reduction in mechanical properties. When the welding current is 85 A, the pitting resistance of weld forming and weld area reaches its optimum. At this time, the tensile strength of the joint is up to 110.9 MPa, the elongation is up to 16.3% and the Vickers Microhardness is up to 46.9 HV.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Automotive Engineering, Guangxi University of Science and Technology, Liuzhou 545006, China
Dongfeng Liuzhou Automobile Co., Ltd., Liuzhou 545005, China
Guangxi Liugong Machinery Co., Ltd., Liuzhou 545006, China
Funding
China Postdoctoral Science Foundation · Guangxi University of Science and Technology Doctoral Fund · Liuzhou Central Guidance for Local Special Projects · Innovation Project of Guangxi University of Science and Technology Graduate Education
References (35)
Show source-provided references
1. Effect of friction stir welding on the microstructure and mechanical properties of AA 6063-T6 aluminum alloy
2. Effects of friction stir welding on microstructure and mechanical properties of 6063 aluminum alloy10.1016/j.matpr.2017.11.527 ↗
3. Welding of Al-Mg alloy: Solid-State vs. Fusion Welding Techniques10.1007/s40997-022-00536-7 ↗
4. Effects of heat input on microstructures and mechanical properties of LAZ931 magnesium-lithium alloy by CO2 laser welding10.1016/j.mtcomm.2023.105536 ↗
5. Chatterjee, S., Cholkar, A.S., Kinahan, D., and Brabazon, D. (2023). TMS Annual Meeting & Exhibition, Springer Nature.
6. Mechanical and microstructural investigation of dissimilar joints of Al-Cu and Cu-Al metals using nanosecond laser10.1007/s12206-022-0738-x ↗
7. Robotic MIG welding process parameter optimization of steel EN24T10.1016/j.matpr.2022.03.091 ↗
8. Characterization of TIG and MIG welded Aluminum 6063 alloys10.1016/j.matpr.2021.05.356 ↗
9. A parametric investigation on friction stir welding of Al-Li 209910.1080/10426914.2020.1765249 ↗
10. Microstructure and cyclic deformation behavior of a friction-stir-welded 7075 Al alloy10.1007/s11661-009-0152-3 ↗
11. Effect of tool dimensions and parameters on the microstructure of friction stir welded aluminum 7449 alloy of various thicknesses10.1016/j.msea.2016.12.077 ↗
12. Investigation on mechanical properties of dissimilar metals using MIG welding10.1016/j.matpr.2020.05.488 ↗
13. Microstructure and mechanical properties of 6061 aluminum alloy laser-MIG hybrid welding joint10.1007/s11771-022-4954-4 ↗
14. Modeling and simulation of weld residual stresses and ultrasonic impact treatment of welded joints10.1016/j.proeng.2018.02.005 ↗
15. Avoiding abnormal grain growth in thick 7XXX aluminum alloy friction stir welds during T6 post heat treatments10.1016/j.msea.2021.140901 ↗
16. Cui, S., Pang, S., Pang, D., Zhang, Q., and Zhang, Z. (2021). Numerical Simulation and Experimental Investigation on 2205 Duplex Stainless Steel K-TIG Welded Joint. Metals, 11.10.3390/met11081323 ↗
17. Precipitates dissolution, phase transformation, and re-precipitation-induced hardness variation in 6082–T6 alloy during MIG welding and subsequent baking10.1007/s11837-019-03375-1 ↗
18. Cui, S., Pang, S., Pang, D., Tian, F., and Yu, Y. (2022). The Microstructure and Pitting Corrosion Behavior of K-TIG Welded Joints of the UNS S32101 Duplex Stainless Steel. Materials, 16.10.3390/ma16010250 ↗
19. Exploring the electrochemistry of 6xxx series aluminum alloys as a function of Si to Mg ratio, Cu content, ageing conditions and microstructure10.1016/j.electacta.2015.12.098 ↗
20. Fe-bearing intermetallics transformation and its influence on the corrosion resistance of Al–Mg–Si alloy weld joints10.1016/j.jmrt.2020.11.077 ↗
21. Corrosion behavior of under-, peak-, and over-aged 6063 alloy: A comparative study10.1002/maco.201910961 ↗
22. Microstructure and mechanical properties of A7N01 aluminum alloy weld joints filled with ER5356 and ER5087 weld wires10.2298/JMMB210625056X ↗
23. Recovering the Fourier law in harmonic chains: A Hamiltonian realization of the Debye/Visscher model10.1016/j.cnsns.2020.105652 ↗
24. Analytical model for three-dimensional non-uniform temperature field and welding stress of thick plates via friction stir weld10.1007/s00170-021-07266-1 ↗
25. Kik, T. (2020). Heat Source Models in Numerical Simulations of Laser Welding. Materials, 13.10.3390/ma13112653 ↗
26. Thermo-mechanical finite element model of friction stir welding of dissimilar alloys10.1007/s00170-014-5680-3 ↗
27. Simulating convective-radiative heat sink effect by means of FEA-based Gaussian heat sources and its approximate analytical solutions for semi-infinite body10.1007/s00170-021-07699-8 ↗
28. Numerical simulation and experimental investigation of band patterns in bobbin tool friction stir welding of aluminum alloy10.1007/s00170-018-2750-y ↗
29. Lu, Q., and Rizwan-Uddin, Y. (2022). A Finite Element Approach for Nonlinear, Transient Heat Conduction Problems with Convection, Radiation or Contact Boundary Conditions. SSRN.10.2139/ssrn.4248584 ↗
30. A novel systematic numerical approach on determination of heat source parameters in welding process10.1016/j.jmrt.2022.04.039 ↗
31. Numerical and experimental study of thermally induced residual stress in the hybrid laser-GMA welding process10.1016/j.jmatprotec.2011.01.012 ↗
32. Zuo, S., Wang, Z., Wang, D., Du, B., Cheng, P., Yang, Y., Zhang, P., and Lang, N. (2020). Numerical Simulation and Experimental Research on Temperature Distribution of Fillet Welds. Materials, 13.10.3390/ma13051222 ↗
33. Numerical modeling of new alterable heat source based on high energy welding beam
34. Microstructure, microhardness and corrosion susceptibility of friction stir welded AlMgSiCu alloy10.1016/j.matdes.2013.09.001 ↗
35. Corrosion mechanism associated with Mg2Si and Si particles in Al-Mg-Si alloys10.1016/S1003-6326(11)61092-3 ↗