Wide-Gap Brazing of K417G Alloy Assisted by In Situ Precipitation of M3B2 Boride Particles
Source abstract
Abstract
In this study, K417G Ni-based superalloy with a 20-mm gap was successfully bonded at 1200 °C using powder metallurgy with a powder mixture. The results indicated that the microstructure and mechanical properties of the as-bonded alloy were highly dependent on the brazing time (15–45 min), mainly due to the precipitation and distribution characteristics of M3B2 boride particles. Specifically, alloy brazed for 30 min exhibited desirable mechanical properties, such as a high tensile ultimate strength of 971 MPa and an elongation at fracture of 6.5% at room temperature, exceeding the balance value (935 MPa) of the base metal. The excellent strength and plasticity were mainly due to coherent strengthening and dispersion strengthening of the in situ spherical and equiaxed M3B2 boride particles in the γ + γ′ matrix. In addition, the disappearance of dendrites and the homogenization of the microstructure are other factors that cannot be excluded. This powder metallurgy technique, which can avoid the eutectic transformation of traditional brazing, provides a new effective method for wide-gap repair of alloy materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Engineering Research Center of Near-net-shape Forming Technology for Metallic Materials, South China University of Technology, Guangzhou 510640, China
Dongguan Hyperpowder Co. Ltd., Dongguan 523808, China
Funding
Science & Technology Project of Guangdong Province
References (43)
Show source-provided references
1. Effect of cooling rate on microstructure, microsegregation and mechanical properties of cast Ni-based superalloy K417G10.1016/j.jmst.2017.03.023 ↗
2. Effects of grain refinement on the microstructure and tensile behaviour of K417G superalloy10.1016/j.msea.2014.11.041 ↗
3. Characteristics, and printability of K417G nickel-base alloy powder prepared by VIGA method10.1080/00325899.2018.1546921 ↗
4. Grain refinement mechanism of nickel-based superalloy by severe plastic deformation—Mechanical machining case10.1016/j.actamat.2019.08.059 ↗
5. Transient liquid phase bonding of γ′- precipitation strengthened Ni based superalloys for repairing gas turbine components10.1016/j.jmapro.2016.10.002 ↗
6. Properties of IN X-750/BNi-2/SAF 2205 joints formed by transient liquid phase bonding10.1016/j.jmatprotec.2019.116297 ↗
7. Shear strength/microstructure relationship for dissimilar IN738/IN718 TLP joints10.1007/s40194-019-00808-y ↗
8. Effect of bonding time on microstructure and mechanical properties of diffusion brazed IN-93910.1016/j.jmatprotec.2018.10.021 ↗
9. Effect of bonding parameters on microstructural characteristics during TLP bonding of directionally solidified Ni-based superalloy10.1016/j.jmapro.2017.09.024 ↗
10. Vacuum brazing of GH99 superalloy using graphene reinforced BNi-2 composite filler10.1016/j.jmst.2018.02.008 ↗
11. Microstructural evolution, and mechanical properties of TLP bonded joints of Mar-M247 superalloys with Ni-Cr-Co-W-Ta-B interlayer10.1016/j.jmatprotec.2017.03.021 ↗
12. Effect of transient liquid phase bonding followed by homogenization on the microstructure and hot tensile behavior of Inconel 738 superalloy10.1016/j.jmapro.2019.10.030 ↗
13. Bonding temperature effects on the wide gap transient liquid phase bonding of Inconel 718 using BNi-2 paste filler metal10.1016/j.apsusc.2019.04.070 ↗
14. Microstructure evolution and mechanical behavior of Ni-based single crystal superalloy joint brazed with mixed powder at elevated temperature10.1016/j.jmst.2017.01.027 ↗
15. Brazing Method Helps Repair Aircraft Gas-Turbine Nozzles
16. Effect of Tungsten Addition on the Nucleation of Borides in Wide Gap Brazed Joint10.1115/1.4000136 ↗
17. The microstructures and mechanical properties of K465 superalloy joints, brazed with different clearances10.1007/s40194-015-0266-8 ↗
18. Effects of gap filler and brazing temperature on fracture and fatigue of wide-gap brazed joints10.1007/BF00353041 ↗
19. Brazing filler metals10.1080/09506608.2019.1613311 ↗
20. Wide Gap Braze Repair of Gas Turbine Blades and Vanes—A Review10.1115/1.4003962 ↗
21. Nickel base wide gap brazing with preplacement technique part 1—Effect of material and process parameters on formation of macrovoids10.1179/mst.1995.11.10.1041 ↗
22. Effect of Gap Filler on Microstructure of Wide Gap Brazing Seam10.2320/matertrans1989.41.1073 ↗
23. Wide Gap Braze Repair Using Vertically Laminated Repair Scheme10.1115/1.2967496 ↗
24. Influence of Solid-State Diffusion during Equilibration on Microstructure and Fatigue Life of Superalloy Wide-Gap Brazements10.1007/s11661-013-1849-x ↗
25. Analysis of Diffusional Solidification in a Wide-Gap Brazing Powder Mixture Using Differential Scanning Calorimetry10.1007/s11661-016-3799-6 ↗
26. M3B2-type borides effect on the wide gap brazing of K417G alloy with mixed powder10.1016/j.jallcom.2019.153431 ↗
27. Hu, Z., Li, W., and Zhao, Y. (2020). The Effect of Laser Power on the Properties of M3B2-Type Boride-Based Cermet Coatings Prepared by Laser Cladding Synthesis. Materials, 13.10.3390/ma13081867 ↗
28. Microstructure, and mechanical properties of molybdenum–iron–boron–chromium cladding using argon arc welding10.1080/02670836.2016.1140926 ↗
29. Understanding non-parabolic solidification kinetics in Ni-based alloys during TLP bonding via thermo-kinetic modelling10.1016/j.jallcom.2016.12.403 ↗
30. The bonding time effects on the transient liquid phase bonding of Inconel 718 using nickel-based sintered brazing preform10.1016/j.apsusc.2019.07.207 ↗
31. Influence of bonding time on the transient liquid phase bonding behavior of Hastelloy X using Ni-Cr-B-Si-Fe filler alloy10.1016/j.msea.2019.03.124 ↗
32. Holding time influence on creep behavior of transient liquid phase bonded joints of Hastelloy X10.1016/j.msea.2019.138694 ↗
33. Effect of carbon and boron additions on segregation behavior of directionally solidified nickel-base superalloys with rhenium10.1016/S1003-6326(13)62861-7 ↗
34. The Effects of Borides on the Mechanical Properties of TLPB Repaired Inconel 738 Superalloy10.1007/s11661-017-4243-2 ↗
35. Wide gap brazing of stainless steel to nickel-based superalloy10.1016/S0924-0136(01)00596-9 ↗
36. Microstructure–properties relationship of TLP-bonded GTD-111 nickel-base superalloy10.1016/j.msea.2008.01.032 ↗
37. Precipitation Behaviors in the Diffusion Affected Zone of TLP Bonded Single Crystal Superalloy Joint10.1016/j.jmst.2014.11.008 ↗
38. Effect of bonding time and homogenization heat treatment on the microstructure and mechanical properties of the transient liquid phase bonded dissimilar GTD-111/FSX-414 TLP superalloys10.1016/j.jallcom.2017.10.105 ↗
39. On the rule of mixtures for predicting the mechanical properties of composites with homogeneously distributed soft and hard particles10.1016/S0924-0136(01)00565-9 ↗
40. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron10.1007/BF02642799 ↗
41. Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering10.1016/j.actamat.2017.04.062 ↗
42. Dual multi-phase intermetallic alloys composed of geometrically close packed Ni3X (X: Al, Ti and V) type structures—II. Mechanical properties10.1016/j.actamat.2005.10.016 ↗
43. Dislocation dynamics and mechanical properties of crystals10.1016/0079-6425(88)90005-9 ↗