Morphology and Structure of TiO2 Nanotube/Carbon Nanostructure Coatings on Titanium Surfaces for Potential Biomedical Application
Source abstract
Abstract
Titanium is the most used material for implant production. To increase its biocompatibility, continuous research on new coatings has been performed by the scientific community. The aim of the present paper is to prepare new coatings on the surfaces of the pure Ti Grade 2 and the Ti6Al4V alloy. Three types of coatings were achieved by applying anodization and chemical vapor deposition (CVD) methods: TiO2 nanotubes (TNTs) were formed by anodization, carbon nanotubes (CNTs) were obtained through a metal-catalyst-free CVD process, and a bilayer coating (TiO2 nanotubes/carbon nanostructures) was prepared via successive anodization and CVD processes. The morphology and structure of the newly developed coatings were characterized using SEM, EDX, AFM, XRD, and Raman spectroscopy. It was found that after anodization, the morphology of the TiO2 layer on pure Ti consisted of a “sponge-like” structure, nanotubes, and nano-rods, while the TNTs layer on the Ti alloy comprised mainly nanotubes. The bilayer coatings on both materials demonstrated different morphologies: the pure Ti metal was covered by a layer of nanotubular and nano-rod TiO2 structures, followed by a dense carbon layer decorated with carbon nanoflakes, and on the Ti alloy, first, a TNTs layer was formed, and then carbon nano-rods were deposited using the CVD method.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Dental Medicine, Medical University of Varna, 55 M. Drinov Str., 9000 Varna, Bulgaria
CSS Nanotech Inc., Unit 427, 2368A Rice Blvd., Houston, TX 77005-2652, USA
Department of Chemistry, University of Mining and Geology, 1700 Sofia, Bulgaria
Funding
Fulbright Foundation
References (62)
Show source-provided references
1. Titanium and titanium alloy applications in medicine10.1504/IJNBM.2007.016517 ↗
2. Surface modification of titanium, titanium alloys, and related materials for biomedical applications10.1016/j.mser.2004.11.001 ↗
3. Stich, T., Alagboso, F., Křenek, T., Kovářík, T., Alt, V., and Docheva, D. (2022). Implant-bone-interface: Reviewing the impact of titanium surface modifications on osteogenic processes in vitro and in vivo. Bioeng. Transl. Med., 7.10.1002/btm2.10239 ↗
4. Kumar, P.S., KS, S.K., Grandhi, V.V., and Gupta, V. (2019). The effects of titanium implant surface topography on osseointegration: Literature review. JMIR Biomed. Eng., 4.10.2196/13237 ↗
5. Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants10.1177/2041731418790694 ↗
6. Enhancing the biocompatibility of Ti6Al4V implants by laser surface microtexturing: An in vitro study10.1007/s00170-013-5277-2 ↗
7. Mechanical properties and in vitro biocompatibility evaluation of TiN/TiO2 coated Ti6Al4V alloy10.1016/j.matpr.2020.05.051 ↗
8. Roughness and hydrophilicity as osteogenic biomimetic surface properties10.1089/ten.tea.2017.0048 ↗
9. The influence of hierarchical hybrid micro/nano-textured titanium surface with titania nanotubes on osteoblast functions10.1016/j.biomaterials.2010.03.014 ↗
10. Enhanced bone-integration capability of alkali-and heat-treated nanopolymorphic titanium in micro-to-nanoscale hierarchy10.1016/j.biomaterials.2011.06.033 ↗
11. Significantly accelerated osteoblast cell growth on aligned TiO2 nanotubes10.1002/jbm.a.30722 ↗
12. Stem cell fate dictated solely by altered nanotube dimension10.1073/pnas.0813200106 ↗
13. Effects of TiO2 nanotubes with different diameters on gene expression and osseointegration of implants in minipigs10.1016/j.biomaterials.2011.06.023 ↗
14. Mechanism of TiO2 nanotubes formation on the surface of pure Ti and Ti-6Al-4V alloy10.4028/www.scientific.net/AMR.939.655 ↗
15. Anodization parameters influencing the morphology and electrical properties of TiO2 nanotubes for living cell interfacing and investigations10.1016/j.msec.2015.10.042 ↗
16. Influence of technological parameters on titanium nanotubes formation
17. Influence of anodization parameters on morphology of TiO2 nanostructured surfaces10.5185/amlett.2016.6156 ↗
18. The winding road for carbon nanotubes in nanomedicine10.1016/j.mattod.2014.07.009 ↗
19. Titanium coated with functionalized carbon nanotubes—A promising novel material for biomedical application as an implantable orthopaedic electronic device10.1016/j.msec.2014.09.025 ↗
20. MWCNT based matrices as a platform for adhesion and growth of cells10.1016/j.compscitech.2016.09.026 ↗
21. Highly wear-resistant and biocompatible carbon nanocomposite coatings for dental implants10.1016/j.biomaterials.2016.06.029 ↗
22. Biomedical applications of the graphene-based materials10.1016/j.msec.2015.12.073 ↗
23. Biomedical investigation of CNT based coatings10.1016/j.surfcoat.2011.02.063 ↗
24. Carbon nanotubes for biomedical applications10.1109/TNB.2005.850478 ↗
25. Basic potential of carbon nanotubes in tissue engineering applications10.1155/2012/343747 ↗
26. Saliev, T. (2019). The advances in biomedical applications of carbon nanotubes. C, 5.10.3390/c5020029 ↗
27. Simon, J., Flahaut, E., and Golzio, M. (2019). Overview of carbon nanotubes for biomedical applications. Materials, 12.10.3390/ma12040624 ↗
28. Carbon nanotube applications for tissue engineering10.1016/j.biomaterials.2006.07.044 ↗
29. Monolayer formation of human osteoblastic cells on vertically aligned multiwalled carbon nanotube scaffolds10.1042/CBI20090131 ↗
30. Large scale synthesis of carbon nanotubes10.1155/2009/756410 ↗
31. Synthesis of Carbon Nano-Tubes on Anodized Titanium Surface with no Metal Catalyst
32. Growth of carbon nanotubes on nanoporous titania templates10.1166/jnn.2007.634 ↗
33. Low-temperature synthesis of multi-walled carbon nanotubes over Cu catalyst10.1016/j.matlet.2011.12.112 ↗
34. Carbon nanotube growth from diamond10.1021/ja901295j ↗
35. Selective Growth of Carbon Nanotubes on Pre-patterned Porous Anodic Aluminum Oxide10.1002/1521-4095(20020219)14:4<277::AID-ADMA277>3.0.CO;2-A ↗
36. Catalyst free growth of a carbon nanotube–alumina composite structure10.1016/j.ica.2006.10.025 ↗
37. Metal-catalyst-free growth of single-walled carbon nanotubes10.1021/ja8093907 ↗
38. The growth of single-walled carbon nanotubes on a silica substrate without using a metal catalyst10.1016/j.carbon.2009.08.039 ↗
39. Chemical vapor deposition of carbon nanotubes: A review on growth mechanism and mass production10.1166/jnn.2010.2939 ↗
40. Metal-catalyst-free growth of single-walled carbon nanotubes on substrates10.1021/ja809635s ↗
41. Growth of carbon nanotubes from titanium dioxide nanoparticles10.1016/j.apsusc.2012.04.161 ↗
42. Microstructure and mechanical properties of nanostructured and microstructured TiO2 films10.1016/j.msea.2016.03.023 ↗
43. Self-organized TiO2 nanotube layer on Ti–6Al–7Nb for biomedical application10.1016/j.surfcoat.2015.01.067 ↗
44. Electrochemical behavior and effect of heat treatment on morphology, crystalline structure of self-organized TiO2 nanotube arrays on Ti–6Al–7Nb for biomedical applications10.1016/j.msec.2015.02.013 ↗
45. Biocompatibility assessment of graphene oxide-hydroxyapatite coating applied on TiO2 nanotubes by ultrasound-assisted pulse electrodeposition10.1016/j.msec.2018.02.012 ↗
46. Raman Spectroscopy of Titania (TiO2) Nanotubular Water-Splitting Catalysts
47. Comparison of graphene growth on single-crystalline and polycrystalline Ni by chemical vapor deposition10.1021/jz1011466 ↗
48. Cytotoxicity assessment of graphene-based nanomaterials on human dental follicle stem cells10.1016/j.colsurfb.2015.10.023 ↗
49. Interface and strengthening mechanisms of Al matrix composites reinforced with in-situ CNTs grown on Ti particles10.1016/j.matdes.2023.111923 ↗
50. Raman spectroscopy for carbon nanotube applications10.1063/5.0030809 ↗
51. Facile synthesis of homogeneously dispersed carbon nanotubes on TC4 alloy powder by in-situ CVD and its growth behavior10.1016/j.jmrt.2023.05.127 ↗
52. Effects of post-processing on microstructure and adhesion strength of TiO2 nanotubes on 3D-printed Ti-6Al-4V alloy10.1016/j.surfcoat.2021.127431 ↗
53. Cell response of anodized nanotubes on titanium and titanium alloys10.1002/jbm.a.34575 ↗
54. The effect of annealing temperatures on surface properties, hydroxyapatite growth and cell behaviors of TiO2 nanotubes10.1002/sia.3683 ↗
55. Structure and photoluminescence properties of graphene nanoflakes grown on zinc oxide films by hot filament chemical vapor deposition10.1016/j.diamond.2016.01.012 ↗
56. Emerging energy and environmental applications of vertically-oriented graphenes10.1039/C4CS00352G ↗
57. Large area CVD growth of graphene10.1016/j.synthmet.2015.07.005 ↗
58. Direct low-temperature nanographene CVD synthesis over a dielectric insulator10.1021/nn100971s ↗
59. Controllable chemical vapor deposition of large area uniform nanocrystalline graphene directly on silicon dioxide10.1063/1.3686135 ↗
60. Segregation growth of graphene on Cu–Ni alloy for precise layer control10.1021/jp202933u ↗
61. Growth mechanism and controlled synthesis of AB-stacked bilayer graphene on Cu–Ni alloy foils10.1021/nn301689m ↗
62. Controllable and rapid synthesis of high-quality and large-area Bernal stacked bilayer graphene using chemical vapor deposition10.1021/cm4021854 ↗