Determination of the Oxygen Content in the LiF–NaF–KF Melt
Source abstract
Abstract
The present paper is dedicated to the quantitative determination of oxygen-containing impurities in the LiF–NaF–KF eutectic using electrochemical (cyclic and square-wave voltammetry) and reduction melting methods. The LiF–NaF–KF melt was analyzed before and after purifying electrolysis. The amount of oxygen-containing impurities removed from the salt during purification was determined. It was found that after electrolysis, the concentration of oxygen-containing impurities decreased by 7 times. The results obtained via electrochemical techniques and reduction melting were well-correlated, which made it possible to evaluate the quality of the LiF–NaF–KF F melt. To verify the analysis conditions, mechanical mixtures of LiF–NaF–KF containing Li2O were analyzed using the reduction melting method. The oxygen concentration in the mixtures varied from 0.672 to 2.554 wt. %. Based on the analysis results, the dependence approximated by the straight line was obtained. These data may be used to draw calibration curves and to further develop the procedure of oxygen analysis of fluoride melts.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Molten salt chemistry and electrochemical processes · Advancements in Battery Materials · Graphite, nuclear technology, radiation studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of High Temperature Electrochemistry, Ural Branch of the Russian Academy of Sciences, Academicheskaya Str., 20, 620990 Ekaterinburg, Russia
JSC “Science and Innovations”, State Corporation Rosatom, 32/2 Kadashevskaya Quay, 115035 Moscow, Russia
Institute of High Energy Physics, Chinese Academy of Sciences, No. 19B Yuquan Road, Shijingshan District, Beijing 100049, China
References (32)
Show source-provided references
1. Thermodynamic properties and phase diagrams of fluoride salts for nuclear applications10.1016/j.jfluchem.2008.07.014 ↗
2. Dolan, T.J. (2017). Molten Salt Reactors and Thorium Energy, Woodhead Publishing, Elsevier Ltd.
3. Accident resistance of molten-salt nuclear reactor10.1007/s10512-018-0425-2 ↗
4. Molten-salt subcritical transplutonium actinide incinerator
5. Ingersoll, D.T. (2004). Status of Preconceptual Design of the Advanced High-Temperature Reactor (AHTR), Oak Ridge National Laboratory, Department of Energy.10.2172/861752 ↗
6. Lizin, A.A., Tomilin, S.V., Ponomarev, L.I., Fedorov, Y.S., and Hirose, Y. (2017). Molten Salt Reactors and Thorium Energy, Woodhead Publishing.
7. Review of thermophysical property methods applied to fueled and un-fueled molten salts10.1016/j.anucene.2020.107608 ↗
8. Characteristic of molten fluoride salt system LiF-BeF2 (Flibe) and LiF-NaF-KF (Flinak) as coolant and fuel carrier in molten salt reactor (MSR)10.1063/1.4972932 ↗
9. Solubility of UF4, ThF4, and CeF3 in a LiF-NaF-KF melt10.1134/S1066362211050079 ↗
10. Mushnikov, P., Tkacheva, O., Voronin, V., Shishkin, V., and Zaikov, Y. (2021). Investigation of the Quasi-Binary Phase Diagram FLiNaK-NdF3. Materials, 14.10.3390/ma14216428 ↗
11. Phase Diagram of the Quasibinary System LiF–NaF–KF–CeF3
12. (2017). Molten Salt Chemistry Workshop: Report for the US Department of Energy, Office of Nuclear Energy Workshop, Oak Ridge National Laboratory.
13. Holcomb, D.E., and Cetiner, S.M. (2010). An Overview of Liquid-Fluoride-Salt Heat Transport Systems, Oak Ridge National Laboratory.10.2172/990239 ↗
14. Materials corrosion in molten LiF–NaF–KF salt10.1016/j.jfluchem.2008.05.008 ↗
15. Karfidov, E.A., Zaikov, Y.P., Nikitina, E.V., Seliverstov, K.E., and Dub, A.V. (2022). High-Temperature Passivation of the Surface of Candidate Materials for MSR by Adding Oxygen Ions to FLiNaK Salt. Materials, 15.10.3390/ma15155174 ↗
16. High temperature corrosion studies in molten salt using salt purification and alloy coating
17. Effects of O2−additive on corrosion behavior of Fe–Cr–Ni alloy in molten fluoride salts10.1016/j.corsci.2019.01.040 ↗
18. Accelerated corrosion testing in molten fluoride salts: Effect of additives and the crucible material10.1016/j.corsci.2021.110011 ↗
19. Use of square wave voltammeter for online monitoring of O2-concentration in molten fluorides at 600 °C10.1016/j.jelechem.2015.04.023 ↗
20. Solubility of MgO in mixed chloride–fluoride melts containing MgF210.3891/acta.chem.scand.51-0504 ↗
21. On the use of electrochemical techniques to monitor free oxide content in molten fluoride media10.1016/j.jelechem.2007.04.005 ↗
22. Electrochemical sensor for monitoring the alumina dissolution and concentration in a cryolite-alumina melt10.1149/1945-7111/abb176 ↗
23. Electrochemical Technique to Monitor the Concentration of Oxide in Molten FLiNaK Salt10.1149/09810.0047ecst ↗
24. Characterization and removal of oxygen ions in LiF-NaF-KF melt by electrochemical methods10.1016/j.jfluchem.2015.01.018 ↗
25. Electrochemical Studies of Oxide Ions and Related Species in Molten Fluorides10.1149/1.2133333 ↗
26. Mirceski, V., Komorsky-Lovric, S., and Lovric, M. (2007). Square-Wave Voltammetry: Theory and Application, Springer Science & Business Media.10.1007/978-3-540-73740-7 ↗
27. Fractional gas analysis in the determination of oxygen in the products of pyrochemical reprocessing of spent nuclear fuels10.1063/5.0088930 ↗
28. Calciothermic reduction of NiO by molten salt electrolysis of CaO in CaCl2 melt10.1016/j.electacta.2011.07.027 ↗
29. Determination of oxygen-to-metal atomic ratio in mixed oxide fuel by non-dispersive infrared spectrophotometry after fusion in an inert gas atmosphere10.1016/S0003-2670(99)00560-7 ↗
30. Determination of oxygen in oxides with high dissociation pressure by inert gas fusion method10.1134/S0020168514150059 ↗
31. Vacuum carbothermic reduction of Al2O3, BeO, MgO–CaO, TiO2, ZrO2, HfO2 + ZrO2, SiO2, SiO2 + Fe2O3, and GeO2 to the Metals. A Thermodynamic Study10.1080/08827508.2010.530723 ↗
32. Determination of Oxygen in Yttrium and Yttrium Fluoride by the Inert Gas Fusion Method10.1021/ac60168a020 ↗