journal article·2023-12-10Open access

The Improvement of the Tribological Behaviour of Chemically Treated Abaca Fibre-Reinforced Polymer Composites

Yucheng Liu, Yunhai Ma

Materials· Volume 16· Issue 24

Abstract

Abaca fibres that have excellent mechanical properties are widely applied in the production and preparation of eco-friendly polymer composites as reinforcement materials. However, the weak interfacial bonding property of the abaca fibre and composite matrix limits the further extended application of abaca fibre-reinforced polymer composites. In this research, the findings demonstrate that, compared to raw abaca fibres, the interfacial shear strength (IFSS) value between the treated fibre and matrix is improved by 32% to 86%. Moreover, chemically treated abaca fibres could not only improve the wear resistance of the polymer composites, but also could promote the formation of primary and secondary plateaus. The best wear resistance behaviour was demonstrated by the sample with abaca fibres treated with 3% NaOH and 5% silane solutions, which had a maximum reduction in the sum wear rate of 28.44%. This research will provide detail on theoretical guidance and technical support for the development of eco-friendly natural fibre-reinforced polymer composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Agricultural Engineering, Jiangsu University, Zhenjiang 212013, China

Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China

Funding

China Postdoctoral Science Foundation · Priority Academic Program Development of Jiangsu Higher Education Institutions

References (47)

Show source-provided references
1. Processing and determination of mechanical properties of Prosopis juliflora bark, banana and coconut fibre reinforced hybrid bio composites for an engineering field10.1016/j.compscitech.2021.108695 ↗
2. Experimental and numerical study of the additively manufactured carbon fibre reinforced polymers including fibre Bragg grating sensors10.1016/j.compstruct.2022.116027 ↗
3. Jones, F.R. (2022). Composites Science, Technology, and Engineering, Cambridge University Press.10.1017/9781139565943 ↗
4. Additive manufacturing of compliance optimized variable stiffness composites through short fiber alignment along curvilinear paths
5. Recent advancement in the natural fibre polymer composites: A comprehensive review10.1016/j.jclepro.2020.124109 ↗
6. Characterization of natural cellulose fibre from corn stalk waste subjected to different surface treatments10.1007/s10570-019-02429-6 ↗
7. A comprehensive review of techniques for natural fibres as reinforcement in composites: Preparation, processing and characterization
8. Improvements in the thermal behaviour of date palm/bamboo fibres reinforced epoxy hybrid composites10.1016/j.compstruct.2021.114644 ↗
9. Characterization of silane treated and untreated natural cellulosic fibre from corn stalk waste as potential reinforcement in polymer composites10.1016/j.carbpol.2019.04.088 ↗
10. Optimization on tribological properties of natural fibre reinforced brake friction composite materials: Effect of objective and subjective weighting methods10.1016/j.polymertesting.2022.107873 ↗
11. A review on alternative raw materials for sustainable production: Novel plant fibres10.1007/s10570-022-04597-4 ↗
12. Mechanical, physical and tribological characterization of nano-cellulose fibres reinforced bio-epoxy composites: An attempt to fabricate and scale the ‘Green’ composite10.1016/j.carbpol.2016.03.097 ↗
13. Natural fibre reinforced non-asbestos organic non-metallic friction composites: Effect of abaca fibre on mechanical and tribological behaviour10.1088/2053-1591/aac1e0 ↗
14. Abaca fibre reinforced polymer composites: A review10.1007/s10853-020-05572-9 ↗
15. Polypropylene biocomposites reinforced with softwood, abaca, jute, and kenaf fibres10.1016/j.indcrop.2015.03.013 ↗
16. Polypropylene/cellulose composites for material extrusion additive manufacturing10.1002/mame.201800037 ↗
17. Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fibre reinforced polymer composites10.1016/j.triboint.2018.11.004 ↗
18. Fatigue and thermo-mechanical properties of chemically treated Morinda citrifolia fibre-reinforced bio-epoxy composite: A sustainable green material for cleaner production10.1016/j.jclepro.2021.129411 ↗
19. In state of art: Mechanical and tribological behaviour of polymeric composites based on natural fibres10.1016/j.matdes.2012.07.014 ↗
20. The influence of surface treatment on the tensile and tribological properties of wood fiber-reinforced polyimide composite10.1002/sia.6369 ↗
21. Application of silane coupling agents to abaca fibres for hydrophobic modification. Cell Chem
22. Development and characterization of alkali treated abaca fibre reinforced friction composites10.1080/09276440.2018.1472456 ↗
23. Evaluation of wear resistance of corn stalk fibre reinforced brake friction materials prepared by wet granulation10.1016/j.wear.2019.05.033 ↗
24. Characterization of interfacial properties between fibre and polymer matrix in composite materials—A critical review10.1016/j.jmrt.2021.05.076 ↗
25. A new eco-friendly chemical treatment of natural fibres: Effect of sodium bicarbonate on properties of sisal fibre and its epoxy composites10.1016/j.compositesb.2015.09.028 ↗
26. (2018). Brake Linins for Automobiles. Standard No. GB 5763-2018.
27. Effects of the shapes and dimensions of mullite whisker on the friction and wear behaviors of resin-based friction materials10.1016/j.wear.2018.03.018 ↗
28. Zhang, K., Wang, F.X., Liang, W.Y., Wang, Z.Q., Duan, Z.W., and Yang, B. (2018). Thermal and mechanical properties of bamboo fibre reinforced epoxy composites. Polymers, 10.10.3390/polym10060608 ↗
29. The mechanical, hygral, and interfacial strength of continuous bamboo fibre reinforced epoxy composites10.1016/j.compositesb.2018.12.013 ↗
30. Influence of sodium hydroxide (NaOH) treatment on mechanical properties and morphological behaviour of Phoenix sp. fibre/epoxy composites10.1007/s10924-020-01921-6 ↗
31. Tribological performance of eco-friendly friction materials with rice husk10.1016/j.wear.2022.204374 ↗
32. Effects of hybrid carbon-aramid fibre on performance of non-asbestos organic brake friction composites10.1016/j.wear.2020.203280 ↗
33. Tribological performance of brake friction materials containing carbon nanotubes10.1016/j.wear.2009.09.003 ↗
34. Effects of different kinds of fibres on mechanical and tribological properties of brake friction materials10.1080/10402004.2013.767399 ↗
35. Influence of modified phenolic resins on the fade and recovery behavior of friction materials10.1016/j.wear.2005.01.011 ↗
36. Synergistic effects of the ingredients of brake friction materials on friction and wear: A case study on phenolic resin and potassium titanate10.1016/j.wear.2019.05.011 ↗
37. Morphology and toughness of abrasive particles and their effects on the friction and wear of friction materials: A case study with zircon and quartz10.1007/s11249-009-9561-0 ↗
38. Yallew, T.B., Narute, P., Sharbidre, R.S., Byen, J.C., Park, J., and Hong, S.G. (2023). Effects of the transfer method and interfacial adhesion on the frictional and wear resistance properties of a graphene-coated polymer. Nanomaterials, 13.10.3390/nano13040655 ↗
39. Interfacial modification and tribological properties of ZnO nanosheet carbon fibre reinforced poly(hexahydrotriazine) composites10.1016/j.triboint.2021.107310 ↗
40. Comparison of tribology performance, particle emissions and brake squeal noise between Cu-containing and Cu-free brake materials10.1016/j.wear.2020.203577 ↗
41. Towards a better understanding of the structures existing on the surface of brake pads10.1016/j.triboint.2016.09.033 ↗
42. Accelerated aging of a glass fibre/polyurethane composite for automotive applications10.1016/j.polymertesting.2019.01.008 ↗
43. An experimental study of the transition in the wear regime of brake friction materials10.1002/pc.26299 ↗
44. Selection of natural fibres based brake friction composites using hybrid ELECTRE-entropy optimization technique10.1016/j.polymertesting.2020.106614 ↗
45. A study of friction, wear and particulate emissions during the bedding stage of a Cu-free friction material10.1016/j.wear.2021.204095 ↗
46. High performance aramid pulp/carbon fibre-reinforced polybenzoxazine composites as friction materials10.1016/j.compositesb.2019.107280 ↗
47. Influence of calcium sulfate whiskers on the tribological characteristics of automotive brake friction materials