journal article·2022-12-08Open access

Microstructural Evolution of Diamond-Based Composites at High Temperature and High Pressure

Tianxu Qiu, Jianwei Feng, Bo Cai, Guojiang Fan, Wei Zhang, Yong Liu

Materials· Volume 15· Issue 24

Abstract

Improving the toughness of diamond composites has become an industrial demand. In this work, Co50Ni40Fe10 multi-element alloy was designed as binder for diamond-based composites prepared by high temperature and high pressure (HTHP). Two methods of mixing-sintering and infiltration-sintering were used to prepare diamond-based composites with different diamond contents. The phase diagrams of Co-C and Co50Ni40Fe10-C at 6 GPa were calculated by Thermo-Calc. The results show that Co50Ni40Fe10 multi-element alloy promotes the sintering of diamond powder than element Co. The transverse rupture strength (TRS) of sintered diamond with Co50Ni40Fe10 (Co50Ni40Fe10-75 vol% diamond) is higher than that of Co-Comp (Co-75 vol% diamond). The TRS of polycrystalline diamond (PCD) with Co50Ni40Fe10 alloy binder is up to 1360.3 MPa, which is 19.2% higher than Co-PCD. Compared with Co, using Co50Ni40Fe10 as binder results in a less metal residue in PCD, while the metal cluster area is smaller and the metal distribution is more uniform.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Diamond and Carbon-based Materials Research · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China

Sino Powder (Henan) Superhard Materials Co., Ltd., Zhengzhou 450001, China

Funding

Regional Innovation and Development Joint Funds of the National Natural Science Foundation of China · National Key Research and Development program of China

References (33)

Show source-provided references
1. Observation of higher stiffness in nanopolycrystal diamond than monocrystal diamond10.1038/ncomms3343 ↗
2. Simultaneous determination of the lattice thermal conductivity and grain/grain thermal resistance in polycrystalline diamond10.1016/j.actamat.2017.08.007 ↗
3. Synthesis of paracrystalline diamond10.1038/s41586-021-04122-w ↗
4. Nanotwinned diamond with unprecedented hardness and stability10.1038/nature13381 ↗
5. Continuous strengthening in nanotwinned diamond10.1038/s41524-019-0256-2 ↗
6. Intersectional nanotwinned diamond-the hardest polycrystalline diamond by design10.1038/s41524-020-00387-3 ↗
7. Ultrahard bulk amorphous carbon from collapsed fullerene10.1038/s41586-021-03882-9 ↗
8. Environmental and resource aspects of substituting cemented carbide with polycrystalline diamond: The case of machining tools10.1016/j.jclepro.2020.123577 ↗
9. Investigations on Diamond Nanostructuring of Different Morphologies by the Reactive-Ion Etching Process and Their Potential Applications10.1021/am401753h ↗
10. Sánchez Egea, A.J., Martynenko, V., Martínez Krahmer, D., López de Lacalle, L.N., Benítez, A., and Genovese, G. (2018). On the Cutting Performance of Segmented Diamond Blades when Dry-Cutting Concrete. Materials, 11.10.3390/ma11020264 ↗
11. Ternero, F., Amaral, P.M., Fernandes, J.C., and Rosa, L.G. (2021). Evaluation of Wear Behaviour in Metallic Binders Employed in Diamond Tools for Cutting Stone. Materials, 14.10.3390/ma14143988 ↗
12. Fracture toughness evaluation of polycrystalline diamond as a function of microstructure10.1016/j.engfracmech.2015.06.008 ↗
13. Research on mechanism of carbon transformation in the preparation of polycrystalline diamond by melt infiltration and growth method under high pressures10.7498/aps.65.068101 ↗
14. Ultrastrong catalyst-free polycrystalline diamond10.1038/s41598-020-79167-4 ↗
15. Coherent interfaces govern direct transformation from graphite to diamond10.1038/s41586-022-04863-2 ↗
16. Mechanism for direct graphite-to-diamond phase transition10.1038/srep05930 ↗
17. On the low pressure transformation of graphite to diamond in the presence of a ‘catalyst-solvent’10.1016/S0040-6090(98)00978-X ↗
18. Synthesis and characterization of IIa-type S-doped diamond in FeNi catalyst under high pressure and high temperature conditions10.1016/j.ijrmhm.2017.03.006 ↗
19. Graphitization Behavior of Single Crystal Diamond for the Application in Nano-Metric Cutting10.2174/1573413714666180517080721 ↗
20. Study hot pressed Fe-diamond composites graphitization10.1016/j.ijrmhm.2012.03.015 ↗
21. The novel and facile electrolysis method for removing the cobalt binder phase from large diameter polycrystalline diamond compacts10.1016/j.ceramint.2021.10.086 ↗
22. Synthesis of growth-type polycrystalline diamond compact (PDC) using the solvent Fe55Ni29Co16 alloy under HPHT10.1007/s11433-012-4797-3 ↗
23. Thermal residual stress of polycrystalline diamond compacts10.1016/S1003-6326(09)60126-6 ↗
24. Effect of cobalt content on the performance of polycrystalline diamond compacts10.1016/j.ijrmhm.2020.105312 ↗
25. Progress of powder metallurgical high entropy alloys
26. Qiu, T.X., Zhang, W., and Liu, Y. (2022). Effect of multi-element alloy-carbide bonding phase on the microstructure of diamond composites. Acta Mater. Compos. Sin., (In Chinese).
27. Effect of controllable decomposition of MAX phase (Ti3SiC2) on mechanical properties of rapidly sintered polycrystalline diamond by HPHT10.1016/j.ceramint.2019.05.193 ↗
28. Lv, X. (2019). Study on Synthetize and Properties of Ti Based Polycrystalline Diamond. [Master’s Thesis, Tianjin University]. (In Chinese).
29. The mechanical properties of polycrystalline diamond as a function of strain rate and temperature10.1016/j.jeurceramsoc.2012.03.026 ↗
30. Effect of SiC whiskers on mechanical properties of thermally stable polycrystalline diamond prepared by HPHT sintering10.1016/j.diamond.2018.10.007 ↗
31. Fabrication and evaluation of mechanical properties of polycrystalline diamond reinforced with carbon-nanotubes by HPHT sintering10.1016/j.ceramint.2020.05.254 ↗
32. Effect of transition metal carbides on mechanical properties of polycrystalline diamond by HPHT sintering10.1016/j.ceramint.2022.02.138 ↗
33. The influence of microstructure on the fracture statistics of polycrystalline diamond and polycrystalline cubic boron nitride10.1016/j.ceramint.2014.03.100 ↗