Mineral Phase Reconstruction and Separation Behavior of Zinc and Iron from Zinc-Containing Dust
Source abstract
Abstract
Zinc-containing dust can be found in ironmaking and steelmaking, and it is an important secondary resource of zinc. Zinc-containing dust from an electric furnace was used as a raw material to study the phase transformation behavior of the dust using a calcification roasting process and the zinc–iron separation behavior by using ammonia leaching. The zinc-bearing dust was mixed with CaO and roasted to transform the zinc ferrite into zinc oxide. The results showed that increasing the calcium oxide to dust ratio could promote the conversion of zinc ferrite to zinc oxide. When the calcium oxide ratio reached 60%, the peak of zinc ferrite in the calcined-roasted product in the zinc-containing dust basically disappeared. As the temperature increased, the zinc oxide grains increased but were still smaller than 10 µm. The calcined-roasted product was crushed and ground, and the zinc was leached by ammonia. A zinc–iron recovery rate of 86.12% was achieved by the ammonia leaching. The leachate could be used for zinc extraction by electrolysis. The leaching residue was mainly calcium ferrate, which could be used in sintering production. The proposed process may achieve on-site recovery of zinc-containing dust in steel-making plants.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Extraction and Bioleaching · Extraction and Separation Processes · Minerals Flotation and Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China
Funding
National Key Basic Research and Development Program · Central Universities of Central South University
References (40)
Show source-provided references
1. Pinc, J., Kubasek, J., Drahokoupil, J., Capek, J., Vojtech, D., and Skolakova, A. (2022). Microstructural and Mechanical Characterization of Newly Developed Zn-Mg-CaO Composite. Materials, 15.10.3390/ma15238703 ↗
2. Martynenko, N., Anisimova, N., Rybalchenko, O., Kiselevskiy, M., Rybalchenko, G., Tabachkova, N., Zheleznyi, M., Temralieva, D., Bazhenov, V., and Koltygin, A. (2022). Structure, Biodegradation, and In Vitro Bioactivity of Zn-1%Mg Alloy Strengthened by High-Pressure Torsion. Materials, 15.10.3390/ma15249073 ↗
3. Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust—A review10.1016/j.jclepro.2021.126788 ↗
4. Facile synthesis of zinc ferrite as adsorbent from high-zinc electric arc furnace dust10.1016/j.powtec.2022.117479 ↗
5. Thermodynamic modelling of the formation of zinc–manganese ferrite spinel in electric arc furnace dust10.1016/j.jhazmat.2010.03.005 ↗
6. Hydrometallurgical extraction of zinc from Jordanian electric arc furnace dust10.1016/j.hydromet.2010.04.014 ↗
7. Carbothermic Reduction of Zinc and Iron Oxides in Electric Arc Furnace Dust10.1016/S1006-706X(14)60066-2 ↗
8. Separation and recovery of zinc, lead and iron from electric arc furnace dust by low temperature smelting10.1016/j.seppur.2023.123355 ↗
9. Pyrometallurgical removal of zinc from basic oxygen steelmaking dust—A review of best available technology10.1016/j.resconrec.2020.104746 ↗
10. Separation and recovery of heavy metals zinc and lead from phosphorus flue dust by vacuum metallurgy10.1016/j.jenvman.2021.113001 ↗
11. Gao, J.J., Wang, H., Wang, J., Zhang, Y.Y., Wang, F., Yang, S., and Li, S.N. (2022). A New Process of Direct Zinc Oxide Production by Carbothermal Reduction of Zinc Ash. Materials, 15.10.3390/ma15155246 ↗
12. Recovery of Zinc by Reaction between Electric Arc Furnace Dust and Calcium Chloride
13. Selective Zinc Removal from Electric Arc Furnace (EAF) Dust by Using Microwave Heating10.1007/s40831-019-00222-0 ↗
14. Li, H., Fu, Y.T., Liang, J.L., Wang, L., Yan, H.Y., and Zhao, L.F. (2021). Preparation of Zinc Oxide and Zinc Ferrite from Zinc Hypoxide by Wet Process and Electrochemistry. Crystals, 11.10.3390/cryst11091133 ↗
15. Behavior of Zn and Fe Content in Electric Arc Furnace Dust as Submitted to Chlorination Methods10.1007/s11663-015-0347-5 ↗
16. Recovery of metal-doped zinc ferrite from zinc-containing electric arc furnace dust: Process development and examination of elemental migration10.1016/j.hydromet.2016.08.004 ↗
17. Extraction of Zinc and Arsenic from Metallurgical Furnace Dust10.1007/s11837-021-04866-w ↗
18. Current status of the technology for utilizing difficult-to-treat dust and sludge produced from the steel industry10.1016/j.jclepro.2022.132909 ↗
19. Lv, W., Gan, M., Fan, X.H., Sun, Z.Q., Zhang, R.C., Ji, Z.Y., and Chen, X.L. (2022). Reaction Behavior and Transformation Path of Zinc in the Heating-Up Zone during Sintering Process. Sustainability, 14.10.3390/su141610147 ↗
20. Phase Transformation and Enhanced Zn Removal Technology During the Iron Ore Sintering Process10.1007/s11837-022-05603-7 ↗
21. A study on the zinc removal kinetics and mechanism of zinc-bearing dust pellets in direct reduction10.1016/j.powtec.2020.11.077 ↗
22. Selective separation of zinc and iron/carbon from blast furnace dust via a hydrometallurgical cooperative leaching method10.1016/j.wasman.2021.12.007 ↗
23. A novel process for the treatment of steelmaking converter dust: Selective leaching and recovery of zinc sulfate and synthesis of iron oxides@HTCC photocatalysts by carbonizing carbohydrates10.1016/j.hydromet.2023.106039 ↗
24. Water leaching and magnetic separation for decreasing the chloride level and upgrading the zinc content of EAF steelmaking baghouse dusts10.1016/j.minpro.2004.04.007 ↗
25. Characterization of basic oxygen furnace dust and zinc removal by acid leaching10.1016/j.mineng.2003.10.030 ↗
26. Hydrometallurgical process for zinc recovery from electric arc furnace dust (EAFD): Part I: Characterization and leaching by diluted sulphuric acid10.1016/j.jhazmat.2010.01.059 ↗
27. Promoted acid leaching of Zn from hazardous zinc-containing metallurgical dusts: Focusing on transformation of Zn phases in selective reduction roasting10.1016/j.psep.2022.05.046 ↗
28. Selective separation of copper and zinc from high acid leaching solution of copper dust using a sulfide precipitation-pickling approach10.1016/j.psep.2021.10.001 ↗
29. The selective alkaline leaching of zinc oxide from Electric Arc Furnace dust pre-treated with calcium oxide10.1016/j.hydromet.2015.11.009 ↗
30. Method of Electric Arc Furnace Dust Processing by Calcination with Lime with Following Alkaline Leaching10.1134/S0036029518130268 ↗
31. An evaluation of chlorination for the removal of zinc from steelmaking dusts10.1016/j.mineng.2011.04.026 ↗
32. Utilization of blast furnace sludge for the removal of zinc from steelmaking dusts using microwave heating10.1016/j.seppur.2018.09.010 ↗
33. Removal of zinc from dusts and sludges from basic oxygen furnaces in the process of ammoniacal leaching10.1016/j.acme.2014.08.004 ↗
34. Mechanism of calcium oxide promoting the separation of zinc and iron in metallurgical dust under reducing atmosphere10.1016/j.jmrt.2019.09.043 ↗
35. Thermodynamic Analysis of Zinc Ferrite Decomposition in Electric Arc Furnace Dust by Lime10.3103/S1067821217060165 ↗
36. New pyrometallurgical process of EAF dust treatment with CaO addition10.1007/s12613-015-1135-6 ↗
37. Effect of CaCO3 on volatilization of self-reduced zinc from blast furnace dust10.1007/s42243-021-00727-7 ↗
38. Xie, Z.Q., Jiang, T., Chen, F., Guo, Y.F., Wang, S., and Yang, L.Z. (2022). Phase Transformation and Zinc Extraction from Zinc Ferrite by Calcium Roasting and Ammonia Leaching Process. Crystals, 12.10.3390/cryst12050641 ↗
39. (2012). Methods for Chemical Analysis of Zinc Concentrates—Part 1:Determination of Zinc Content—Precipitate Separation-Na2EDTA Titrimetric Method and Extractive Separation-Na2EDTA Titrimetric Method (Standard No. GB/T 8151.1-2012).
40. Synthesis, characterization and hemolysis studies of Zn1−x CaxFe2O4 ferrites synthesized by sol-gel for hyperthermia treatment applications10.1016/j.jmmm.2016.10.099 ↗