A Comprehensive Understanding of Knife Cutting: Effects of Hardness, Blade Angle and the Micro-Geometry of Blade Edge on the Cutting Performance
Source abstract
Abstract
The cutting performance of steel blades is an eternal, attractive topic in the knife industry. It is a complicated process to cut up materials because it usually involves the contact mechanics of the material been cut, the geometry and roughness of the blade edge and the hardness and wear resistance of the blade steel. Therefore, a comprehensive analysis is required to evaluate the cutting performance of knife blades. In this study, such an analysis was conducted based on a quantitative model to describe the cutting depth of paper cards containing SiO2 particles by steel blades, and major contributing factors were summarized. The effect of the micro-geometries of blade edges was thoroughly discussed, and a geometry factor ξ for the micro-geometry of a blade edge was introduced into the model. The experimental results indicated that mechanical processing could produce a rough blade edge and a higher ξ value, accordingly. A similar effect was caused by the carbides in the martensitic steels for blades, and the ξ value was found to increase linearly with the volumetric fraction of the carbides. The extraordinary cutting behavior of the 3V blade implied that fine coherent carbides may result in an efficient improvement (40–50%) in the total cutting depth.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Metal Alloys Wear and Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
Yangjiang Advanced Alloys Laboratory, Yangjiang 529500, China
Yangjiang Tuobituo Industrial Technology Research Institute Co., Ltd., Yangjiang 529500, China
Funding
Fundamental Research Funds for the Central Universities · Special Fund Project for Science and Technology Innovation Strategy of Guangdong Province
References (41)
Show source-provided references
1. Formation of Black Patina on an Ancient Chinese Bronze Sword of the Warring States Period10.1016/j.apsusc.2018.06.024 ↗
2. Fabrication of a Bronze Age Sword Using Ancient Techniques10.1007/s11837-016-2105-9 ↗
3. Advanced Cutting Techniques for Solid Food: Mechanisms, Applications, Modeling Approaches, and Future Perspectives10.1111/1541-4337.12896 ↗
4. Smart Knife: Integrated Intelligence for Robotic Meat Cutting10.1109/JSEN.2022.3208667 ↗
5. On the Improvement of the Ductile Removal Ability of Brittle KDP Crystal via Temperature Effect10.1016/j.ceramint.2021.08.214 ↗
6. Temperature Effect on the Material Removal Mechanism of Soft-Brittle Crystals at Nano/Micron Scale10.1016/j.ijmachtools.2020.103620 ↗
7. Research on the Light Intensity Modulation and Characterizing Methods of Surface Texture on KDP Optics Generated in Fly-Cutting and Micro Ball-End Milling Processes10.1016/j.cirpj.2022.11.013 ↗
8. Studies on Micro-Structure of a Knife-Edge and Degradation of Cutting Performance
9. Assessment of Knife Sharpness by Means of a Cutting Force Measuring System10.1016/j.apergo.2005.12.007 ↗
10. A Technique for Field Measurement of Knife Sharpness10.1016/j.apergo.2005.04.001 ↗
11. Maintaining Knife Sharpness in Industrial Meat Cutting: A Matter of Knife or Meat Cutter Ability10.1016/j.apergo.2016.03.010 ↗
12. Understanding the Cutting Mechanisms of Composite Structured Soft Tissues10.1016/j.ijmachtools.2020.103685 ↗
13. The Fracture Mechanics in Cutting: A Comparative Study on Hard and Soft Polymeric Materials10.1016/j.ijmecsci.2018.09.013 ↗
14. On the Sharpness of Straight Edge Blades in Cutting Soft Solids: Part I—Indentation Experiments10.1016/j.engfracmech.2006.10.015 ↗
15. On the Sharpness of Straight Edge Blades in Cutting Soft Solids: Part II—Analysis of Blade Geometry10.1016/j.engfracmech.2009.10.003 ↗
16. Analysis of the Sharpness of Blades for Food Cutting10.1016/j.jfoodeng.2016.04.022 ↗
17. Failure Analysis in Sugar Cane Cutter Base Blades10.1016/j.engfailanal.2020.104503 ↗
18. How Hair Deforms Steel10.1126/science.aba9490 ↗
19. Sharp Edge Cutting Technology—A Review of Hand Held and and Machine Knives/Blands and Their Sharp Edge Retention10.1080/02670844.2000.11962915 ↗
20. Wear Tests of Steel Knife Blades10.1016/j.wear.2008.02.021 ↗
21. (2007). Materials and Articles in Contact with Foodstuffs—Cutlery and Table Holloware—Part 5: Specification for Sharpness and Edge Retention Test of Cutlery. Standard No. ISO 8442-5:2004. Available online: https://www.iso.org/standard/30037.html.
22. Wu, D., Zhang, Q., and Liu, W. (2022). Effect of Alloying Elements on the Sharpness Retention of Knife Blades Made of High Carbon Martensitic Stainless Steels. Metals, 12.10.3390/met12030472 ↗
23. Enhanced Wear Resistance of Blades Made of Martensitic Steels: A Study of Diverse a’-Matrix/Carbide Microstructures10.1016/j.matchar.2023.112939 ↗
24. Bin Effect of Primary Carbides on the Sharpness of Kitchen Knives Made of 8Cr13MoV Steel10.1007/s11665-019-04209-6 ↗
25. Evolution of Carbides and Performance of Knives Made of Aged 8Cr13MoV Steel10.1080/02670836.2019.1660507 ↗
26. Improvement in Wear Characteristics of Electric Hair Clipper Blade Using High Hardness Material10.2320/matertrans.48.1131 ↗
27. Evaluating Shaver Sharpness by Measuring the Pulling Force on Artificial Hair10.1299/jamdsm.1.661 ↗
28. Chemo-Mechanical Effects on the Cutting-Induced Mixed-Mode II-III Fracture of Martensitic Stainless Steels: An in-Situ Investigation10.1016/j.actamat.2022.117803 ↗
29. A Quantitative Model That Correlates Sharpness Retention and Abrasive Wear of Knife Blades10.1016/j.wear.2023.204634 ↗
30. The Effect of Blade Finish and Blade Edge Angle on Forces Used in Meat Cutting Operations10.1016/j.apergo.2004.08.002 ↗
31. Evaluation of Temper Softening Behavior of Fe-C Binary Martensitic Steels by Nanoindentation10.1016/j.scriptamat.2003.08.025 ↗
32. Microstructure and Mechanical Properties of Martensitic Stainless Steel 6Cr15MoV10.1016/S1006-706X(12)60074-0 ↗
33. Effect of Tempering Temperature on the Microstructure, Corrosion Resistance, and Antibacterial Properties of Cu-Bearing Martensitic Stainless Steel10.1002/maco.202112382 ↗
34. Effect of Quenching Process on the Microstructure and Hardness of High-Carbon Martensitic Stainless Steel10.1007/s11665-015-1723-7 ↗
35. Micro-Geometrical Characteristics of the Cutting Edge as the Intersection of Two Rough Surfaces10.1016/j.wear.2010.04.005 ↗
36. Durability of Cutting Performance of a Knife and Micro-Structural Change of a Knife Edge
37. The Effect of the Addition of Alloying Elements on Carbide Precipitation and Mechanical Properties in 5% Chromium Martensitic Steels10.1016/j.actamat.2007.05.004 ↗
38. Investigation of Hardness and Fracture Toughness Properties of Fe/VC Multilayer Coatings with Coherent Interfaces10.1016/j.surfcoat.2016.01.025 ↗
39. Preparation of V8C7-Fe/Iron Dual-Scale Composite via Two-Step in Situ Reaction10.1016/j.jmrt.2020.02.038 ↗
40. Atomic-Scale Investigation of Deep Hydrogen Trapping in NbC/α-Fe Semi-Coherent Interfaces10.1016/j.actamat.2020.09.031 ↗
41. Ab Initio Study of Energetics and Structures of Heterophase Interfaces: From Coherent to Semicoherent Interfaces10.1016/j.actamat.2018.06.030 ↗