Reliability Analysis of PAUT Based on the Round-Robin Test for Pipe Welds with Thermal Fatigue Cracks
Source abstract
Abstract
Thermal fatigue cracks occurring in pipes in nuclear power plants pose a high degree of risk. Thermal fatigue cracks are generated when the thermal fatigue load caused by local temperature gradients is repeatedly applied. The flaws are mainly found in welds, owing to the effects of stress concentration caused by the material properties and geometric shapes of welds. Thermal fatigue pipes are classified as targets of risk-informed in-service inspection, for which ultrasonic testing, a volumetric non-destructive testing method, is applied. With the advancement of ultrasonic testing techniques, various studies have been conducted recently to apply the phased array ultrasonic testing (PAUT) method to the inspection of thermal fatigue cracks occurring on pipes. A quantitative reliability analysis of the PAUT method must be performed to apply the PAUT method to on-site thermal fatigue crack inspection. In this study, to evaluate the quantitative reliability of the PAUT method for thermal fatigue cracks, we fabricated crack specimens with the thermal fatigue mechanism applied to the pipe welds. We performed a round-robin test to collect PAUT data and determine the validity of the detection performance (probability of detection; POD) and the error in the sizing accuracy (root-mean-square error; RMSE) evaluation. The analysis results of the POD and sizing performance of the length and depth of thermal fatigue cracks were comparatively evaluated with the acceptance criteria of the American Society of Mechanical Engineers Code to confirm the effectiveness of applying the PAUT method.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
NDT Research Center, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Gyeonggi-do, Republic of Korea
Doosan Enerbility, 22, Doosan Volvo-ro, Seongsan-gu, Changwon-si 51711, Gyeongsangnam-do, Republic of Korea
KEPCO KPS, 211 Munhwa-ro, Naju-si 58326, Jeolla-do, Republic of Korea
Funding
Korea Institute of Energy Technology Evaluation and Planning (KETEP) · Ministry of Trade, Industry and Energy (MOTIE) · Ministry of Education
References (25)
Show source-provided references
1. Piping specific analysis of stresses due to thermal stratification10.1016/S0029-5493(99)00007-2 ↗
2. Fatigue crack growth characteristics of nitrogen-alloyed type 347 stainless steel under operating conditions of a pressurized water reactor10.1016/j.net.2017.01.019 ↗
3. Assessment of thermal fatigue in mixing tee by FSI analysis10.5516/NET.09.2012.026 ↗
4. LES study on the turbulent thermal stratification and thermo-mechanical fatigue analysis for NPP surge line10.1016/j.ijthermalsci.2022.107608 ↗
5. Studies of thermal stratification stresses and its impact on fatigue design of NPP piping10.1016/j.ijpvp.2022.104716 ↗
6. Experimental investigation of thermal stratification in a pressurizer surge line10.1016/j.anucene.2014.06.045 ↗
7. Application of piping failure database to nuclear safety issues in Korea10.1016/j.ijpvp.2011.10.008 ↗
8. Advances and researches on non destructive testing: A review10.1016/j.matpr.2017.11.620 ↗
9. Moran, T.L., Ramuhalli, P., Pardini, A.F., Anderson, M.T., and Doctor, S.R. (2010). Replacement of Radiography with Ultrasonics for the Nondestructive Inspection of Welds-Evaluation of Technical Gaps-An Interim Report, US Department of Energy. PNNL-19086.
10. Moran, T.L., Prowant, M.S., Nove, C.A., Pardini, A.F., Crawford, S.L., Cinson, A.D., and Anderson, M.T. (2015). Applying Ultrasonic Testing in Lieu of Radiography for Volumetric Examination of Carbon Steel Piping, US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research.10.1115/PVP2014-28832 ↗
11. Development of an ultra sonic phased array system for nondestructive tests of nuclear power plant components10.1016/S0029-5493(02)00024-9 ↗
12. Koskinen, A., and Leskelä, E. (2013, January 1–3). Differences in indications of different artificially produced flaws in non-destructive examination. Proceedings of the 10th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components, Cannes, France.
13. A Study on Ultrasonic Testing for Nondestructive Evaluation of Thermal Fatigue Crack in Pipelines10.4028/www.scientific.net/KEM.321-323.747 ↗
14. Wang, J., Yusa, N., Pan, H., Kemppainen, M., Virkkunen, I., and Hashizume, H. (August, January 29). Modeling of Thermal Fatigue Crack for Enhancement of Electromagnetic Nondestructive Evaluation of Nuclear Power Plant. Proceedings of the 21st International Conference on Nuclear Engineering, Chengdu, China.
15. Discussion on modeling of thermal fatigue cracks in numerical simulation based on eddy current signals10.1016/j.ndteint.2013.01.012 ↗
16. Accuracy and Usefulness Evaluation of the Phased Array Ultrasonic Testing for Thermal Fatigue Cracks10.7779/JKSNT.2019.39.4.238 ↗
17. Thermal Fatigue Experience in French Piping: Influence of Surface Condition and Weld Local Geometry10.1007/BF03266362 ↗
18. Korean Round-Robin Tests Result for New International Program to Assess the Reliability of Emerging Nondestructive Techniques10.1016/j.net.2016.09.006 ↗
19. Probability of detection, localization, and sizing: The evolution of reliability metrics in Structural Health Monitoring10.1177/14759217211060780 ↗
20. Comparison of â versus a and Hit/Miss POD-Estimation methods: A European viewpoint10.1007/s10921-019-0628-z ↗
21. Annis, C. (2009). MIL-HDBK-1823A, Nondestructive Evaluation System Reliability Assessment, Department of Defense.
22. Kurz, J.H., Jüngert, A., Dugan, S., and Dobmann, G. (2012, January 16–20). Probability of Detection (POD) determination using ultrasound phased array for considering NDT in probabilistic damage assessments. Proceedings of the 18th World Conference on Nondestructive Testing, Durban, South Africa.
23. A Brief Review of Tests for Normality10.11648/j.ajtas.20160501.12 ↗
24. Georgiou, G.A. (2006). Probability of Detection (POD) Curves: Derivation, Applications and Limitations, Jacobi Consulting Limited Health and Safety Executive Research Report.
25. Reliability considerations of NDT by probability of detection (POD) determination using ultrasound phased array10.1016/j.engfailanal.2013.06.008 ↗