Show source-provided references
5. Kareem, A., Abu Qudeiri, J., Abdudeen, A., Ahammed, T., and Ziout, A. (2021). A Review on AA 6061 Metal Matrix Composites Produced by Stir Casting. Materials, 14.
10.3390/ma14010175 ↗7. P/M aluminum matrix composites: An overview
9. Effect of energy per layer on the anisotropy of selective laser melted AlSi12 aluminium alloy
11. Reducing porosity in AlSi10Mg parts processed by selective laser melting
14. Selective laser melting of aluminium and aluminium metal matrix composites: Review
16. Revealing the correlation of microstructure configuration and mechanical properties of Al–Si–Mg alloy reinforced by C-doped TiB2 and SiC
10.1016/j.matdes.2023.111694 ↗20. Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
10.1016/j.msea.2018.10.026 ↗22. Enhanced structural integrity of Laser Powder Bed Fusion based AlSi10Mg parts by attaining defect free melt pool formations
10.1038/s41598-023-43718-2 ↗23. Formation mechanisms and control strategies of metallurgical defects and microstructures during laser powder bed fusion of AlSi10Mg lattice structures
10.1016/j.jmrt.2023.12.006 ↗27. Influence of SiC Content on Microstructure and Mechanical Properties of SiCp/AlSi7Mg Composites Fabricated by Selective Laser Melting
10.1007/s11665-022-07079-7 ↗28. Surface finish and properties enhancement of selective laser melted 316L stainless steel by surface mechanical attrition treatment
10.1016/j.surfcoat.2019.124993 ↗30. Capturing and characterizing geometric complexities of metal additively manufactured parts using x-ray micro-computed tomography and multiscale curvature analyses
10.1088/2051-672X/acb3e7 ↗31. Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J., Aversa, A., Ambrosio, E.P., Lombardi, M., Fino, P., and Manfredi, D. (2017). On the Selective laser melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties. Materials, 10.
10.3390/ma10010076 ↗34. Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development
10.1016/j.matdes.2016.05.066 ↗36. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism
10.1016/j.msea.2016.03.088 ↗38. Influence of Rice Husk Ash Particles on Microstructure and Tensile Behavior of AA6061 Aluminum Matrix Composites Produced using Friction Stir Processing
10.1016/j.coco.2017.02.001 ↗40. The AlSi10Mg samples produced by selective laser melting: Single track, densification, microstructure and mechanical behavior
10.1016/j.apsusc.2017.02.215 ↗41. Influence of working environment and built orientation on the tensile properties of selective laser melted AlSi10Mg alloy
10.1016/j.msea.2019.01.103 ↗42. High-temperature mechanical properties of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting technologies (AM-SLM)
43. Selective laser melting of aluminum die-cast alloy—Correlations between process parameters, solidification conditions, and resulting mechanical properties
10.2351/1.4906389 ↗44. Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment
10.1016/j.msea.2018.07.103 ↗48. The effect of a remelting treatment scanning strategy on the surface morphology, defect reduction mechanism, and mechanical properties of a selective laser-melted Al-based alloy
10.1007/s10853-021-06761-w ↗