journal article·2024-08-27Open access

The Abrasive Effect of Moon and Mars Regolith Simulants on Stainless Steel Rotating Shaft and Polytetrafluoroethylene Sealing Material Pairs

Gábor Kalácska, György Barkó, Hailemariam Shegawu, Ádám Kalácska, László Zsidai, Róbert Keresztes, Zoltán Károly

Materials· Volume 17· Issue 17

Abstract

For space missions to either the Moon or Mars, protecting mechanical moving parts from the abrasive effects of prevailing surface dust is crucial. This paper compares the abrasive effects of two lunar and two Martian simulant regoliths using special pin-on-disc tests on a stainless steel/polytetrafluoroethylene (PTFE) sealing material pair. Due to the regolith particles entering the contact zone, a three-body abrasion mechanism took place. We found that friction coefficients stabilised between 0.2 and 0.4 for all simulants. Wear curves, surface roughness measurements, and microscopic images all suggest a significantly lower abrasion effect of the Martian regoliths than that of the lunar ones. It applies not only to steel surfaces but also to the PTFE pins. The dominant abrasive micro-mechanism of the disc surface is micro-ploughing in the case of all tests, while the transformation of the counterface is mixed. The surface of pin material is plastically transformed through micro-ploughing, while the material is removed through micro-cutting due to the slide over hard soil particles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Lubrication Engineering · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Technology, Szent István Campus, Magyar Agrár- és Élettudományi Egyetem (MATE), Páter K. u. 1., H-2100 Gödöllő, Hungary

Mechanical Engineering Doctoral School, Magyar Agrár- és Élettudományi Egyetem (MATE), Páter K. u. 1., H-2100 Gödöllő, Hungary

Laboratory Soete, Tech Lane Gent Science Park—Campus A, University of Gent, Technologiepark 131, B-9052 Gent, Belgium

HUN-REN Research Centre for Natural Sciences, Institute of Materials and Environmental Chemistry, Magyar Tudósok Krt. 2, H-1117 Budapest, Hungary

Funding

ESA

References (30)

Show source-provided references
1. Apollo Sample 70051 and High- and low-Ti Lunar Soil Simulants MLS-1A and JSC-1A: Implications for Future Lunar Exploration10.1029/2006JE002767 ↗
2. Some Expected Mechanical Characteristics of Lunar Dust: A Geological View10.1063/1.2845062 ↗
3. Catling, D.C., and Leovy, C. (2007). Mars Atmosphere: History and Surface Interactions. Encyclopedia of the Solar System, Elsevier.10.1016/B978-012088589-3/50019-0 ↗
4. Review of Space Resources Processing for Mars Missions: Martian Simulants, Regolith Bonding Concepts and Additive Manufacturing10.1016/j.oceram.2021.100216 ↗
5. An Investigation of the Mechanical Properties of Some Martian Regolith Simulants with Respect to the Surface Properties at the InSight Mission Landing Site10.1007/s11214-017-0339-7 ↗
6. Lunar Surface: Dust Dynamics and Regolith Mechanics10.1029/2005RG000184 ↗
7. Wear of Materials by Lunar Regolith Simulant
8. Matsumoto, K., Suzuki, M., Nishida, S.-I., and Wakabayashi, S. (2009, January 6–11). Tribological Properties of Solid Lubricants in Moon Dust Environment. Proceedings of the World Tribology Congress 2009, Kyoto, Japan.
9. Barkó, G., Kalácska, G., Keresztes, R., Zsidai, L., Shegawu, H., and Kalácska, Á. (2023). Abrasion Evaluation of Moon and Mars Simulants on Rotating Shaft/Sealing Materials: Simulants and Structural Materials Review and Selection. Lubricants, 11.10.20944/preprints202306.1135.v1 ↗
10. A Feasible Multilayer Structure Design for Solid Lubricant Coatings in a Lunar Environment10.1039/C6RA14314H ↗
11. Makówka, M. (2023, January 20–22). MOS2 (TI, W) Coatings as Surface Modification of Friction Pairs Operating in Space and Dusty Lunar Atmosphere. Presented at the European Space Mechanisms and Tribology Symposium, Warsaw, Poland.
12. Development of Mechanical Seal against Dust for Lunar Exploration
13. Recent Trends in Tribological Performance of Aerospace Materials in Lunar Regolith Environment—A Critical Review10.1016/j.asr.2023.10.039 ↗
14. Delgado, I.R., and Handschuh, M.J. (2010, January 12–14). Preliminary Assessment of Seals for Dust Mitigation of Mechanical Components for Lunar Surface Systems. Proceedings of the 40th Aerospace Mechanisms Symposium, Cocoa Beach, FL, USA,.
15. Agui, J., and Nakagawa, M. (2005, January 10–13). Dust on the Moon and Mars. Proceedings of the 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, USA.10.2514/6.2005-539 ↗
16. Damięcka-Suchocka, M., and Katzer, J. (2022). Terrestrial Laser Scanning of Lunar Soil Simulants. Materials, 15.10.3390/ma15248773 ↗
17. (2024, August 20). Exolith Lab LHS-1 Lunar Highlands Simulant. Available online: https://spaceresourcetech.com/collections/regolith-simulants/products/lhs-1-lunar-highlands-simulant.
18. Exolith Lab (2024, August 20). LMS-1 Lunar Mare Simulant. Available online: https://spaceresourcetech.com/collections/regolith-simulants/products/lms-1-lunar-mare-simulant.
19. Exolith Lab (2024, August 20). MGS-1 Mars Global Simulant. Available online: https://spaceresourcetech.com/products/mgs-1-mars-global-simulant.
20. Exolith Lab (2024, August 20). JEZ-1 Jerezo Delta Simulant. Available online: https://spaceresourcetech.com/products/jez-1-jezero-delta-simulant.
21. Transient and Stationary Changes of the Mechanical Properties of the First Body Governed by the Hydrostatic Pressure Component of the Local Stress State during Dry Friction10.1016/S0167-8922(03)80083-4 ↗
22. Rheology and Flows of Solid Third Bodies: Background and Application to an MoS1.6 Coating10.1016/S0043-1648(02)00008-X ↗
23. Berthier, Y. (2001). Background on Friction and Wear. Handbook of Materials Behavior Models, Academic Press.10.1016/B978-012443341-0/50074-0 ↗
24. Abrasive Wear of PEEK and ATSP-Based Polymer Composite Coatings under Lunar Regolith Conditions10.1016/j.wear.2022.204461 ↗
25. An Experimental and Theoretical Investigation of Ploughing, Cutting and Wedge Formation during Abrasive Wear10.1016/0301-679X(88)90128-4 ↗
26. Kato, K., and Adachi, K. (2001). Wear Mechanisms. Modern Tribology Handbook, CRC Press.10.1201/9780849377877.ch7 ↗
27. Zum Gahr, K.-H. (1987). Microstructure and Wear of Materials, Elsevier Science Publishers. [1st ed.].
28. The Effect of Hardness on the Transition of the Abrasive Wear Mechanism of Steels10.1016/0043-1648(88)90102-0 ↗
29. Tribological Investigation of Abrasion Resistant Steels with Martensitic and Retained Austenitic Microstructure in Single- and Multi–Asperity Contact
30. Effect of Abrasive Size on Wear of Metallic Materials and Its Relationship with Microchips Morphology and Wear Micromechanisms: Part 210.1016/j.wear.2011.05.036 ↗