Experimental and Numerical Study of Steel–Concrete Composite Beams Strengthened under Load
Source abstract
Abstract
This study analysed the strengthening process of a classical steel–concrete composite beam. The beam consisted of a reinforced concrete slab connected by shear studs to an IPE steel profile. The key idea was that the composite beam was strengthened under load. This process simulated an actual reinforced structure that is always subjected to dead loads, with possible service loads. This study assumed that strengthening was implemented to increase the load-carrying capacity and stiffness, not as a way for simulation a repair. The strengthening consisted of expanding the steel part of the beam by welding an additional plate to the bottom flange of the IPE profile. This study included the results of numerical analyses conducted in Abaqus software and lab results. A three-dimensional numerical model was created, taking into account the non-linear behaviour of concrete and steel, the susceptibility of the composite at the joint plane, and the residual stresses created during welding. A full-scale strengthening of the composite beams under load was carried out. Comparison of the results obtained in the experimental tests and numerical analyses showed a very high convergence of the results, as well as in terms of the non-linear operation of steel and concrete. This confirmed the validity of the created numerical model, which can be the basis for further research into the process of optimal strengthening of composite elements.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Civil and Environmental Engineering, West Pomeranian University of Technology in Szczecin, al. Piastów 17, 70-310 Szczecin, Poland
References (50)
Show source-provided references
1. An experimental and numerical study of aluminium–concrete joints and composite beams10.1016/j.acme.2018.11.007 ↗
2. An numerical simulation of an aluminium-concrete beam10.1016/j.proeng.2017.02.167 ↗
3. Aluminium alloys as structural material: A review of research10.1016/j.engstruct.2020.111372 ↗
4. Concrete-filled double-skin aluminum circular hollow section stub columns10.1016/j.tws.2018.09.037 ↗
5. Experimental and numerical investigations of aluminium-timber composite beams with bolted connections10.1016/j.istruc.2021.08.111 ↗
6. Chybiński, M., and Polus, Ł. (2022). Experimental Study of Aluminium-Timber Composite Bolted Connections Strengthened with Toothed Plates. Materials, 15.10.3390/ma15155271 ↗
7. Structural Behavior of Timber Aluminum Composite Beams under Static Loads
8. Chybiński, M., and Polus, Ł. (2023). Structural Behaviour of Aluminium–Timber Composite Beams with Partial Shear Connections. Appl. Sci., 13.10.3390/app13031603 ↗
9. Experimental and numerical study of steel-timber composite (STC) beams10.1016/j.jcsr.2016.04.005 ↗
10. Innovative composite steel-timber floors with prefabricated modular components10.1016/j.engstruct.2016.11.062 ↗
11. Elastic design of steel-timber composite beams10.1080/17480272.2022.2093128 ↗
12. Theoretical and Numerical Analyses of Steel-timber Composite Beams with LVL Slabs
13. Laboratory tests of new connectors for timber-concrete composite structures
14. A new composite connector for timber-concrete composite structures10.1016/j.conbuildmat.2016.02.025 ↗
15. Timber-concrete composite bridges: Three case studies
16. Timber-concrete-composites increasing the use of timber in construction10.1007/s00107-015-0975-0 ↗
17. Timber-timber composite (TTC) connections and beams: An experimental and numerical study10.1016/j.conbuildmat.2021.124493 ↗
18. Innovative steel-glass components for high-performance building skins: Testing of full-scale prototypes10.1007/s40940-016-0034-1 ↗
19. Strengthening under Load: The Effect of Preload Magnitudes10.1016/j.proeng.2016.08.570 ↗
20. Hybrid strengthening of steel-concrete composite beam, part 1: Experimental investigation10.1016/j.jcsr.2017.11.005 ↗
21. Stability of steel columns strengthened under preload: Numerical study with experimental validation10.1016/j.jcsr.2022.107440 ↗
22. Strengthening of existing composite steel-concrete beams utilising bolted shear connectors and welded studs10.1016/j.jcsr.2015.09.006 ↗
23. Influence of Bimoment Restraints on the Load-Bearing Capacity of a Steel I-Beam
24. Finite element study of steel beams reinforced while under load10.1016/j.engstruct.2009.06.011 ↗
25. Experimental behavior and strength of steel beams strengthened while under load10.1016/j.jcsr.2009.01.008 ↗
26. Lateral buckling behavior and strengthening techniques of coped steel I-beams10.1016/j.jcsr.2015.02.003 ↗
27. Axial-compression mechanical properties of square steel columns strengthened by welding under high load10.1016/j.jcsr.2020.106390 ↗
28. Strengthening of steel columns under load: Torsional-flexural buckling10.1155/2016/2765821 ↗
29. Strengthening system using post-tension tendon with an internal anchorage of concrete members10.1016/j.engstruct.2016.06.003 ↗
30. Flexural strengthening of reinforced concrete beams using external tendons10.1016/j.engstruct.2021.113277 ↗
31. Elbelbisi, A.H., El-Sisi, A.A., Hassan, H.A., Salim, H.A., and Shabaan, H.F. (2022). Parametric Study on Steel–Concrete Composite Beams Strengthened with Post-Tensioned CFRP Tendons. Sustainability, 14.10.3390/su142315792 ↗
32. Behavior of I-section steel beam welding reinforced while under load10.1016/j.jcsr.2014.12.020 ↗
33. Circular steel tubes strengthened by welding angle steel under preloading condition10.1016/j.jcsr.2021.106816 ↗
34. Prediction of the welding distortion of large steel structure with mechanical restraint using equivalent load methods10.1016/j.ijnaoe.2016.11.002 ↗
35. Column Stability during Welding10.1088/1757-899X/471/5/052019 ↗
36. (2019). Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature. Standard No. ISO 6892-1:2019.
37. Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration10.1016/S1644-9665(12)60105-8 ↗
38. An elastic plastic damage formulation for concrete: Application to elementary tests and comparison with an isotropic damage model10.1016/j.cma.2005.04.017 ↗
39. Identification of parameters of concrete damage plasticity constitutive model
40. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
41. Elastic Plastic and Damage Model for Concrete Materials: Part I-Theoretical Formulation
42. Application of bridge information modelling using laser scanning for static and dynamic analysis with concrete damage plasticity10.1016/j.aej.2023.08.023 ↗
43. Damage-plasticity modeling of shear failure in reinforced concrete structures10.1016/j.engfracmech.2023.109536 ↗
44. Modeling strain rate effect on tensile strength of concrete using damage plasticity model10.1016/j.ijimpeng.2021.104132 ↗
45. Finite element simulation of bond-zone behavior of pullout test of reinforcement embedded in concrete using concrete damage-plasticity model 2 (CDPM2)10.1016/j.engstruct.2020.110984 ↗
46. Finite element analysis of reinforced concrete deep beams with square web openings using damage plasticity model10.1016/j.engstruct.2022.115496 ↗
47. A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads10.1016/j.jobe.2021.103239 ↗
48. Static Equilibrium Paths of Steel-Concrete Composite Beam Strengthened Under Load
49. Numerical Modelling Of The Strengthening Process Of Steel-Concrete Composite Beams
50. Szewczyk, P., and Szumigała, M. (2021). Optimal design of steel–concrete composite beams strengthened under load. Materials, 14.10.3390/ma14164715 ↗