journal article·2022-06-23Open access

Nondestructive Monitoring Hydration of Belite Calcium Sulfoaluminate Cement by EIS Measurement

Lin Chi, Mian Wang, Zhuolin Wang, Zhenming Li, Bin Peng, Junjie Li

Materials· Volume 15· Issue 13

Abstract

In this study, the impact of water-to-cement (w/c) ratios of belite calcium sulfoaluminate cement (BCSA) on the hydration kinetics and the electrochemical impedance spectroscopy (EIS) parameters is studied. According to the analysis of classic hydration measurements, such as calorimetry tests, chemical shrinkage content, and chemically bound water content, it can be concluded that a higher w/c ratio clearly accelerates the hydration of BCSA cement paste. The electrical resistivity of BCSA0.35 cement paste is more than 4.5 times that of BCSA0.45 and BCSA0.5, due to the gradually densified micropore structure blocking the electrical signal transmission rather than the free charged-ion content. The porosity of BCSA0.5 is 27.5% higher than that of BCSA0.35 and 7.8% higher than that of BCSA0.45, which proves the resistivity is clearly related to the variation in microstructure, especially for the porosity and pore size distribution. The novelty of this study is the linear regression with logarithm terms of electrical resistivity and classic hydration parameters such as chemical shrinkage, cumulative hydration heat, and chemically bound water is established to extend the classical expression of cement hydration degree. It indicates that the electrochemical impedance spectroscopy can be taken as a nondestructive testing measurement to real-time monitor the cement hydration process of cement-based materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Smart Materials for Construction · Concrete and Cement Materials Research · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Environment and Architecture, University of Shanghai for Science and Technology, Shanghai 200093, China

Shanghai Key Laboratory of Engineering Structure Safety, Shanghai Research Institute of Building Sciences Co., Ltd., Shanghai 200032, China

Microlab, Faculty of Civil Engineering and Geoscience, Delft University of Technology, 2628 CN Delft, The Netherlands

Funding

Shanghai Sailing Program · Key Laboratory of Performance Evolution and Control for Engineering Structures (Tongji University), the Ministry of Education · Open Fund of Shanghai Key Laboratory of Engineering Structure Safety

References (51)

Show source-provided references
1. The Cement Industry On the Way to a Low-Carbon Future10.1016/j.cemconres.2019.105792 ↗
2. Eco-Efficient Cements: Potential Economically Viable Solutions for a low-CO2 Cement-Based Materials Industry10.1016/j.cemconres.2018.03.015 ↗
3. Synthesizing of Calcium Sulfoaluminate-Belite (CSAB) Cements From Industrial Waste Materials10.1016/j.matpr.2018.04.033 ↗
4. Phase Development and Hydration Kinetics of Belite-Calcium Sulfoaluminate Cements at Different Curing Temperatures10.1016/j.ceramint.2020.05.029 ↗
5. Industrial Trial Production of Low Energy Belite Cement10.1016/S0958-9465(02)00097-5 ↗
6. Investigation On the Fast Carbon Dioxide Sequestration Speed of Cement-Based Materials at 300 °C–700 °C10.1016/j.conbuildmat.2021.123392 ↗
7. Dolenec, S., Šter, K., Borštnar, M., Nagode, K., Ipavec, A., and Žibret, L. (2020). Effect of the Cooling Regime on the Mineralogy and Reactivity of Belite-Sulfoaluminate Clinkers. Minerals, 10.10.3390/min10100910 ↗
8. Active Low-Energy Belite Cement10.1016/j.cemconres.2014.11.004 ↗
9. Hydrothermal Synthesis of Calcium Sulfoaluminate-Belite Cement From Industrial Waste Materials10.1016/j.jclepro.2015.12.068 ↗
10. Aluminum-Rich Belite Sulfoaluminate Cements: Clinkering and Early Age Hydration10.1016/j.cemconres.2009.11.003 ↗
11. Impact of Quantity of Anhydrite, Water to Binder Ratio, Fineness On Kinetics and Phase Assemblage of Belite-Ye’elimite-Ferrite Cement10.1016/j.cemconres.2017.04.014 ↗
12. Using Gypsum to Control Hydration Kinetics of CSA Cements10.1016/j.conbuildmat.2017.07.217 ↗
13. Comparison of Compressive Strength and Electrical Resistivity of Cementitious Composites with Different Nano- and Micro-Fillers10.1016/j.acme.2017.05.010 ↗
14. Effects of Graphene Oxide On Early-Age Hydration and Electrical Resistivity of Portland Cement Paste10.1016/j.conbuildmat.2017.01.066 ↗
15. Evaluation of of Mortar Setting Time by Using Electrical Resistivity Measurements10.1016/j.conbuildmat.2017.04.088 ↗
16. The Mechanical Strength, Degree of Hydration, and Electrical Resistivity of Cement Pastes Modified with Superabsorbent Polymers10.1016/j.conbuildmat.2015.12.082 ↗
17. Kinetics Parameters of Cement Hydration by Electrical Resistivity Measurement and Calorimetry10.1680/adcr.13.00034 ↗
18. Experimental and Numerical Study of an Electromagnetic Sensor for Non-Destructive Evaluation of Steel Corrosion in Concrete10.1016/j.sna.2020.112371 ↗
19. Bolborea, B., Baera, C., and Dan, S. (2021). Concrete Compressive Strength by Means of Ultrasonic Pulse Velocity and Moduli of Elasticity. Materials, 14.10.37247/PAMS4ED.4.22.7 ↗
20. Assessing Concrete Strength with Rebound Hammer: Review of Key Issues and Ideas for More Reliable Conclusions10.1617/s11527-013-0139-9 ↗
21. The Use of Non-Destructive Testing to Evaluate the Compressive Strength of a Lime-Stabilised Rammed-Earth Wall: Rebound Index and Ultrasonic Pulse Velocity10.1016/j.conbuildmat.2020.118060 ↗
22. Reinforced Concrete Structure: Non Destructive in Situ Strength Assessment of Concrete10.1016/j.conbuildmat.2014.11.023 ↗
23. Advances and Researches On Non Destructive Testing: A Review10.1016/j.matpr.2017.11.620 ↗
24. AC Impedance Spectroscopy (AC-IS) Analysis to Characterize the Effect of Nanomaterials in Cement-Based Mortars10.1016/j.conbuildmat.2020.121260 ↗
25. A Review On Microstructural Characterization of Cement-Based Materials by AC Impedance Spectroscopy10.1016/j.cemconcomp.2019.03.018 ↗
26. Cement-Based Materials for Self-Sensing and Structural Damage Advance Warning Alert by Electrical Resistivity10.1016/j.matpr.2020.11.381 ↗
27. Evaluation of Aging Processes of Petroleum Asphalt Cements by Solid State Electrochemical Monitoring10.1016/j.electacta.2018.02.039 ↗
28. Hydration Characteristics of Low Carbon Cementitious Materials with Multiple Solid Wastes10.1016/j.conbuildmat.2022.126366 ↗
29. Development of Mathematical Models for Predicting the Compressive Strength and Hydration Process Using the EIS Impedance of Cementitious Materials10.1016/j.conbuildmat.2019.03.056 ↗
30. Investigation of the Hydration Properties of Cement with EDTA by Alternative Current Impedance Spectroscopy10.1016/j.cemconcomp.2021.104365 ↗
31. (2017). Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste. American Society for Testing and Materials (Standard No. ASTM C 1608-17).
32. Fetal Cardiovascular and Fluid Responses to Maternal Volume Loading with Lactated Ringer Or Hypotonic Solution10.1016/S0002-9378(12)90792-9 ↗
33. (2021). Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-In. Or [50mm] Cube Specimens) (Standard No. ASTM C109/C109M-21).
34. (2017). Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry (Standard No. ASTM C1702-17).
35. Harmonic Analysis On the Effect of Potential Perturbations and Electrodes Arrangements On the Electrochemical Impedance (EIS) Measurement of Cementitious Material10.1016/j.conbuildmat.2020.121701 ↗
36. Effect of Alkalis Content On Calcium Sulfoaluminate (CSA) Cement Hydration10.1016/j.cemconres.2019.105953 ↗
37. Monitoring Hydration of Sr-doped Calcium Zirconium Aluminate (Ca, Sr)7ZrAl6O18 Cement Via Electrochemical Impedance Spectroscopy (EIS) and Supported Techniques10.1016/j.conbuildmat.2019.02.073 ↗
38. Shrinkage, Hydration, and Strength Development of Limestone Calcined Clay Cement (LC3) with Different Sulfation Levels10.1016/j.cemconcomp.2021.104403 ↗
39. Hydration, Shrinkage, Pore Structure and Fractal Dimension of Silica Fume Modified Low Heat Portland Cement-Based Materials10.1016/j.conbuildmat.2020.121952 ↗
40. Burduhos-Nergis, D., Vizureanu, P., Sandu, A.V., and Bejinariu, C. (2020). Evaluation of the Corrosion Resistance of Phosphate Coatings Deposited on the Surface of the Carbon Steel Used for Carabiners Manufacturing. Appl. Sci., 10.10.3390/app10082753 ↗
41. Impedance Spectroscopy (I): A New Equivalent Circuit Model for Hydrated Portland Cement Paste10.1016/0008-8846(92)90107-7 ↗
42. The Review of Early Hydration of Cement-Based Materials by Electrical Methods10.1016/j.conbuildmat.2017.04.073 ↗
43. Evolutionary Trace for Early Hydration of Cement Paste Using Electrical Resistivity Method10.1016/j.conbuildmat.2016.03.127 ↗
44. Relationship between Chemical Shrinkage and Electrical Resistivity for Cement Pastes at Early Age10.1061/(ASCE)MT.1943-5533.0000851 ↗
45. Piezoresistive Properties of Cement-Based Sensors: Review and Perspective10.1016/j.conbuildmat.2019.01.081 ↗
46. Role of Layered Double Hydroxides in Setting, Hydration Degree, Microstructure and Compressive Strength of Cement Paste10.1016/j.clay.2018.03.024 ↗
47. Electrochemical Impedance Spectroscopy (EIS) Used to Evaluate Influence of Different External Pressures, Curing Ages and Self-Healing Environments On the Self-Healing Behavior of Engineered Cementitious Composites (ECC)10.1016/j.conbuildmat.2018.08.104 ↗
48. Monitoring the Evolution of Material Structure in Cement Pastes and Concretes Using Electrical Property Measurements10.1016/j.conbuildmat.2013.08.038 ↗
49. The Review of Pore Structure Evaluation in Cementitious Materials by Electrical Methods10.1016/j.conbuildmat.2016.05.037 ↗
50. The Connectivity of Pore Space in Mudstones: Insights From High-Pressure Wood’s Metal Injection, BIB-SEM Imaging, and Mercury Intrusion Porosimetry10.1111/gfl.12128 ↗
51. Electrical Conductivity of Drying Cement Paste10.1617/s11527-006-9211-z ↗