journal article·2022-07-04Open access

Experimental and Numerical Analysis of the Concrete Maturation Process with Additive of Phase Change Materials

Mahmoud Hsino, Tomasz Jankowiak, Józef Jasiczak

Materials· Volume 15· Issue 13

Abstract

The article presents selected types of phase change materials (PCM) and their properties in terms of applications in various fields of science such as construction and concrete technology. The aim of the article is to present a comparative analysis between the results of the laboratory tests and numerical simulations. The analysis contains two types of PCM (powder and in liquid), which were dosed in a hybrid system to the concrete mix. The purpose of using PCM is to allow the technological barrier to be exceeded in hot and dry climate conditions, enabling the construction of non-cracking concrete structures. The paper presents a parametric analysis of the influence of various modeling elements on the obtained results. The procedure of generating and absorbing heat caused by the applied PCM was also implemented using user subroutine into finite element code (Abaqus/Standard). The numerically obtained results are consistent with the experimental results. The presented results demonstrate that the use of PCM improves the conditions of concrete maturation by reducing the average temperature of the mixture in its entire volume.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Academy of Applied Sciences Stanisław Staszic in Piła, Podchorazych 10, 64-920 Pila, Poland

Institute of Structural Analysis, Poznan University of Technology, Piotrowo 5, 60-965 Poznan, Poland

Institute of Civil Engineering, Poznan University of Technology, Piotrowo 5, 60-965 Poznan, Poland

Funding

Poznan University of Technology—Polish Academy of Science

References (41)

Show source-provided references
1. Phase Change Materials as a Modifier of Ageing Cement Concrete in Hot and Dry Climate10.4028/www.scientific.net/AMR.804.129 ↗
2. Neville, A.M. (2011). Properties of Concrete, Pearson Education Limited.
3. Assessment of risk of thermal cracking in hardening concrete10.1061/(ASCE)0733-9445(1994)120:10(2893) ↗
4. Bofang, Z. (2013). Thermal Stresses and Temperature Control of Mass Concrete, Butterworth-Heinemann.10.1016/B978-0-12-407723-2.00023-3 ↗
5. Early-age behaviour of concrete nuclear containments10.1016/j.nucengdes.2008.04.009 ↗
6. Pan, Y., Prado, A., Porras, R., Hafez, O.M., and Bolander, J.E. (2017). Lattice modeling of early-age behavior of structural concrete. Materials, 10.10.3390/ma10030231 ↗
7. Nonlinear thermal stress analysis of a massive concrete structure10.1016/0045-7949(87)90259-8 ↗
8. A review on phase change materials for thermal energy storage in buildings: Heating and hybrid applications10.1016/j.est.2020.101913 ↗
9. Hsino, M., and Pasławski, J. (2018, January 20). Flexible procedure for concreting in hot and dry climate based on Phase Change Material. Proceedings of the 3rd International Workshop on Flexibility in Sustainable Construction (ORSDCE 2018), Poznan, Poland.10.1051/matecconf/201822201005 ↗
10. Potential applications of phase change materials in concrete technology10.1016/j.cemconcomp.2007.04.007 ↗
11. Hsino, M. (2022, June 28). The Use of Phase-Change Materials for Concrete Care in Dry Tropical Climate. Doctoral Dissertation, Poznan, Poland. Available online: https://sin.put.poznan.pl/files/download/33785.
12. Evaluating the use of phase change materials in concrete pavement to melt ice and snow10.1061/(ASCE)MT.1943-5533.0001439 ↗
13. Šavija, B. (2018). Smart Crack Control in Concrete through Use of Phase Change Materials (PCMs): A Review. Materials, 11.10.3390/ma11050654 ↗
14. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
15. On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials10.1016/j.cemconcomp.2014.03.003 ↗
16. Encaplsulated phase-change materials as additives in cementitious materials to promote thermal comfort in concrete constructions10.1617/s11527-014-0490-5 ↗
17. Development of ductile cementitious composites incorporating microencapsulated phase change materials10.1007/s12572-017-0182-9 ↗
18. Figure of merit for the thermal performance of cementitious composites containing phase change materials10.1016/j.cemconcomp.2015.10.023 ↗
19. Early-age temperature evolutions in concrete pavements containing microencapsulated phase change materials10.1016/j.conbuildmat.2017.04.150 ↗
20. The behavior of self-compacting concrete containing micro-encapsulated phase change materials10.1016/j.cemconcomp.2009.08.002 ↗
21. Mechanical and thermal characterizations of various thermal energy storage concretes including low-cost bio-sourced PCM10.1016/j.enbuild.2021.110878 ↗
22. Jaworski, M. (2022, July 01). Materiały Zmiennofazowe (PCM) w Budownictwie–Właściwości i Rodzaje. Available online: https://www.izolacje.com.pl/artykul/chemia-budowlana/157086,materialy-zmiennofazowe-pcm-w-budownictwie-wlasciwosci-i-rodzaje.
23. Materiały zmiennofazowe dostępne na rynku–właściwości i zastosowanie
24. (2022, July 01). BASF. Available online: https://www.basf.com/gb/en/media/news-releases/2013/11/PCM-Mark.html.
25. (2022, July 01). Rubitherm. Available online: https://www.rubitherm.eu/.
26. Gawin, D. (2000). Modelling of Coupled Hygro-Thermal Phenomena in Building Materials and Building Components, Publishing House of Łódź Technical University. (In Polish).
27. Numerical analysis of hygro-thermic behaviour and damage of concrete at high temperature10.1002/(SICI)1099-1484(199901)4:1<37::AID-CFM58>3.0.CO;2-S ↗
28. Modelling of hygrothermal behaviour and damage of concrete at temperature above the critical point of water10.1002/nag.211 ↗
29. Simulation of damage–permeability coupling in hygro-thermo-mechanical analysis of concrete at high temperature10.1002/cnm.472 ↗
30. Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation10.1016/S0045-7825(03)00200-7 ↗
31. Modelling of deformations of high strength concrete at elevated temperatures
32. Towards prediction of the thermal spalling risk through a multi-phase porous media model of concrete10.1016/j.cma.2005.10.021 ↗
33. Thermal conductivity of concrete—A review10.1016/j.jobe.2018.07.002 ↗
34. Development of thermal energy storage concrete10.1016/j.cemconres.2003.10.022 ↗
35. Dassault Systemes Simulia Corp (2021). Abaqus 2021 Analysis User’s Manual, Dassault Systemes Simulia Corperation.
36. Incropera, F., and DeWitt, D. (1985). Introduction to Heat Transfer, John WHey & Sons.
37. Helowicz, A. (2022, July 01). Analiza pól temperatury wywołanych ciepłem hydratacji w masywach betonowych, Instytut inżynierii lądowej, Politechnika Wrocławska, Raport I I L serii PRE nr 1/2003,1-201, Wrocław 2003. Available online: https://www.scribd.com/document/332342495/098-Helowicz-a-Analiza-Pol-Temperatury-Wywo%C5%82anych-Ciep%C5%82em-Hydratacji-w-Masywach-Betonowych-Praca-Doktorska.
38. (2022, July 01). ICiMB OSiMB in Krakow, Report, Badanie ciepła hydratacji CEM1 42,5 N. Available online: https://drive.google.com/file/d/1Z0jj6TNp-uv0Vnbmw7oXHC1VYNdU7iHT/view?usp=sharing.
39. Use of phase change materials in concrete: Current challenges10.1051/rees/2019006 ↗
40. Incorporation of phase change materials into building envelope for thermal comfort and energy saving: A comprehensive analysis10.1016/j.jobe.2020.102122 ↗
41. Essid, N., Eddhahak-Ouni, A., and Neji, J. (2020). Experimental and Numerical Thermal Properties Investigation of Cement-Based Materials Modified with PCM for Building Construction Use. J. Archit. Eng., 26.10.1061/(ASCE)AE.1943-5568.0000399 ↗