Analysis of Active and Passive Deformation of Expanded Polystyrene Foam under Short-Term Compression
Source abstract
Abstract
In this paper, we undertake a detailed analysis of the active and passive deformation of expanded polystyrene (EPS), which is used as a thermal insulating layer in building partitions, under short-term compressive loading. The values of residual strain in 10–40 kg/m3 density EPS after monotonically increasing loading under active deformations of 20%, 30%, 40%, 50%, and 60% with the following complete removal are determined. These values are a physical sign of the elastic–plastic state of EPS. It has been shown that the final destruction of cells takes place in EPS when the active strain reaches 50%. Empirical equations are proposed to estimate the residual strain of EPS based on density with determination coefficients varying from 0.744 to 0.986 at a confidence level of 90%. Moreover, graphical interpretations with regression equations for residual strain dependence on density and compressive strength, as well as density and active strain, were proposed with determination coefficients equal to 0.779 and 0.717, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural mechanics and materials · Environmental and Industrial Safety · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Thermal Insulating Materials and Acoustics, Institute of Building Materials, Faculty of Civil Engineering, Vilnius Gediminas Technical University, Linkmenu St. 28, LT-08217 Vilnius, Lithuania
Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland
References (47)
Show source-provided references
1. Aksit, M., Zhao, C., Klose, B., Kreger, K., Schmidt, H.W., and Alstädt, V. (2019). Extruded polystyrene foams with enhanced insulation and mechanical properties by a benzene-trisamide-based additive. Polymers, 11.10.3390/polym11020268 ↗
2. Dissolution and recovery of waste expanded polystyrene using alternative essential oil10.1016/j.fuel.2018.11.055 ↗
3. Modelling of the mechanical behavior of polyurethane foams by means of micromechanical characterization and computational homogenization10.1016/j.ijsolstr.2018.03.026 ↗
4. Zhang, Q., Chen, W., Qu, G., Lin, X., Han, D., Yan, X., and Zhang, H. (2019). Liquefaction of peanut shells with cation exchange resin and sulfuric acid as dual catalyst for the subsequent synthesis of rigid polyurethane foam. Polymers, 11.10.3390/polym11060993 ↗
5. SHPB experiment research on dynamic property of expanded polystyrene foam10.1016/j.polymertesting.2018.06.004 ↗
6. Gibson, L.J., and Ashby, M.F. (2001). Cellular Solids, Structure and Properties, Cambridge University Press. [2nd ed.].
7. Study of the fracture behavior of flexible polypropylene foams using essential work of fracture (EWF)10.1016/j.polymertesting.2011.10.013 ↗
8. Structural analysis of insulating polymer foams with terahertz spectroscopy and imaging10.1016/j.polymertesting.2013.03.004 ↗
9. Colored polyurethane foams with enhanced mechanical and thermal properties10.1016/j.polymertesting.2019.105986 ↗
10. Monodisperse polystyrene foam via polymerization of foamed emulsion: Structure and mechanical properties10.1039/C6CP06612G ↗
11. Keratin feathers as a filler for rigid polyurethane foams on the basis of soybean oil polyol10.1016/j.polymertesting.2018.09.032 ↗
12. Polystyrene foam with high cell density and small cell size by compression-injection molding and core back foaming technique: Evolution of cells in cavity10.1002/mame.201800110 ↗
13. Moisture-mechanical performance inprovementof thermal insulating polyurethane using paper production waste particles grafted with different coupling agents10.1016/j.conbuildmat.2019.03.048 ↗
14. Dynamic fracture toughness of polyurethane foam10.1016/j.polymertesting.2008.08.006 ↗
15. Investigation of mechanical behaviour of expanded polystyrene under compressive and bending loadings10.37358/MP.20.2.5366 ↗
16. A parametric study on crushability of open-cell structural polymeric foams10.1007/s10934-005-1652-1 ↗
17. Multiple compressive loading and unloading behavior of polymeric foams10.1515/POLYENG.2007.27.8.607 ↗
18. Energy absorption calculations in multiple compressive loading of polymeric foams10.1016/j.matdes.2008.04.054 ↗
19. Finite element analysis of expanded polystyrene foam under multiple compressive loading and unloading10.1016/j.matdes.2010.07.025 ↗
20. Mixed-mode I/II fracture properties of selectively laser sintered polyamide10.1016/j.tafmec.2022.103527 ↗
21. Khristenko, U., Constantinescu, A., Le Tallec, P., and Wohlmuth, B. (2022). Statistically equivalent surrogate material models: Impact of random imperfections on the elasto-plastic response. Comput. Methods Appl. Mech. Engrg., article in press.10.1016/j.cma.2022.115278 ↗
22. Design and construction of expanded polystyrene embankments. Practical design methods as used in the United Kingdom10.1016/0950-0618(95)00069-0 ↗
23. Strain-rate effects on elastic and early cell-collapse responses of a polystyrene foam10.1016/j.ijimpeng.2004.02.003 ↗
24. Assesment of strength under compression of expanded polystyrene (EPS) slabs
25. Deformation mechanisms and energy absorption of polystyrene foams for protective helmets10.1016/S0142-9418(01)00073-3 ↗
26. Mills, N.J. (2008, January 11–13). Micromechanics of Polymeric Foams. Proceedings of the 3rd Nordic meeting on Materials and Mechanics, Aalborg, Denmark.
27. Pseudo-elastic description of polymeric foams at finite deformation with stress softening and residual strain effects10.1016/j.matdes.2010.07.004 ↗
28. Indentation of expanded polystyrene foams with a ball10.1016/j.ijmecsci.2019.105030 ↗
29. (2012). EN 13163—Thermal Insulation Products for Buildings—Factory Made Expanded Polystyrene (EPS) Products—Specification, European Standardization Committee.
30. (2013). EN 12085—Thermal Insulating Products for Building Applications—Determination of Linear Dimensions of Test Specimens, European Standardization Committee.
31. (2013). EN 1602—Thermal Insulating Products for Building Applications—Determination of the Apparent Density, European Standardization Committee.
32. (2013). EN 826—Thermal Insulating Products for Building Applications—Determination of Compression Behaviour, European Standardization Committee.
33. (2022, September 15). Electronic Statistics Textbook, StatSoft. Available online: http://www.statsoft.com/textbook/.
34. Sokal, R.R., and Rohlf, F.J. (1998). The Principles and Practice of Statistics in Biological Research. Biometry, W. H. Freeman and Company. [3rd ed.].
35. Chetyrkin, Y.M. (1977). Statistical Prediction Methods, Finansy i Statistika Publ.
36. Sachs, L. (1972). Statistical Evaluation, Springer.
37. Vaitkus, S. (2007). Experimental Investigations of Strength and Deformation Properties of Expanded Polystyrene Under Short- and Long-Term Compressive Loading, Technika.
38. Predicting the deformability of expanded polystyrene under short—term compression
39. Evaluation of the performance of extruded polystyrene boards—implications for their application in earthquake engineering10.1016/j.polymertesting.2014.09.013 ↗
40. Analysis of the viscoelastoplastic behavior of expanded polystyrene under compressive loading: Experiments and modeling10.1023/A:1010480315162 ↗
41. Deformation response of EPS foam under combined compression-shear loading. Part I: Experimental design and quasi-static tests10.1016/j.ijmecsci.2018.06.014 ↗
42. Gómez-Rojo, R., Alameda, L., Rodríguez, Á., Calderón, V., and Gutiérrez-González, S. (2019). Characterization of polyurethane foam waste for reuse in eco-efficient building materials. Polymers, 11.10.3390/polym11020359 ↗
43. Ultra-low density epoxy/polystyrene foam composite with high specific strength and pseudo-plastic behavior10.1016/j.coco.2019.06.008 ↗
44. Ehinger, D., Weise, J., Baumeister, J., Funk, A., Waske, A., Krüger, L., and Martin, U. (2018). Microstructure and deformation response of TRIP-steel syntatic foams to quasi-static and dynamic compressive loads. Materials, 11.10.3390/ma11050656 ↗
45. Large elastic strains of plastic foams10.1007/s11029-005-0067-z ↗
46. Constitutive model of aluminum foam with temperature effect under quasi-static compression
47. A non-linear regression model of the deformation behaviour of aluminium foams subjected to quasi-static compression