journal article·2024-03-11Open access

Effect of Extrusion on Mechanical Property, Corrosion Behavior, and In Vitro Biocompatibility of the As-Cast Mg-Zn-Y-Sr Alloy

Tao Huang, Lijing Yang, Chunxiang Xu, Cheng Xu, Qingke Zhang, Jinshan Zhang, Zhenlun Song

Materials· Volume 17· Issue 6

Abstract

The effect of extrusion on the microstructure, mechanical property, corrosion behavior, and in vitro biocompatibility of as-cast Mg-1.5Zn-1.2Y-0.1Sr (wt.%) alloy was investigated via tensile tests, electrochemical methods, immersion tests, methylthiazolyl diphenyltetrazolium bromide (MTT), and analytical techniques. Results showed that the as-cast and as-extruded Mg-1.5Zn-1.2Y-0.1Sr alloys comprised an α-Mg matrix and Mg3Y2Zn3 phase (W-phase). In the as-cast alloy, the W-phase was mainly distributed at the grain boundaries, with a small amount of W-phase in the grains. After hot extrusion, the W-phase was broken down into small particles that were dispersed in the alloy, and the grains were refined considerably. The as-extruded alloy exhibited appropriate mechanical properties that were attributed to refinement strengthening, dispersion strengthening, dislocation strengthening, and precipitation strengthening. The as-cast and as-extruded alloys exhibited galvanic corrosion between the W-phase and α-Mg matrix as the main corrosion mechanism. The coarse W-phase directly caused the poor corrosion resistance of the as-cast alloy. The as-extruded alloy obtained via hydrogen evolution and mass loss had corrosion rates of less than 0.5 mm/year. MTT, high-content screening (HCS) analysis, and cell adhesion tests revealed that the as-extruded alloy can improve L929 cell viability and has great potential in the field of biomedical biodegradable implant materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China

College of Materials Science and Engineering, Taiyuan University of Technology, No. 79 Yingze West Street, Taiyuan 030024, China

Funding

Ningbo Youth Science and Technology Innovation Leading Talent Project · Ningbo International R&D Collaboration Project · National Nature Science Foundation of China

References (63)

Show source-provided references
1. A comprehensive review on biocompatible Mg-based alloys as temporary orthopaedic implants: Current status, challenges, and future prospects10.1016/j.jma.2021.09.005 ↗
2. Magnesium-based composites and alloys for medical applications: A review of mechanical and corrosion properties10.1016/j.jallcom.2019.04.080 ↗
3. Additive manufacturing of biodegradable magnesium-based materials: Design strategies, properties, and biomedical applications10.1016/j.jma.2022.12.001 ↗
4. Dryhval, B., Husak, Y., Sulaieva, O., Deineka, V., Pernakov, M., Lyndin, M., Romaniuk, A., Simka, W., and Pogorielov, M. (2023). In Vivo Safety of New Coating for Biodegradable Magnesium Implants. Materials, 16.10.3390/ma16175807 ↗
5. Magnesium and its alloys as orthopedic biomaterials: A review10.1016/j.biomaterials.2005.10.003 ↗
6. Thermal stability, grain growth kinetics, mechanical properties, and bio-corrosion resistance of pure Mg, ZK30, and ZEK300 alloys: A comparative study10.1016/j.mtcomm.2022.104825 ↗
7. Shafyra, S., Nazim, E.M., Ngadiman, N.H.A., and Sudin, I. (2023). Comparative Study on the Microstructure and Biodegradation Behavior of Commercialized Pure Mg and Mg-1.0Ca-0.5Sr Alloy in 27 mM HCO3−-SBF: The Influence of the pH Regulation Treatments. Metals, 13.10.3390/met13010136 ↗
8. Degradable biomaterials based on magnesium corrosion10.1016/j.cossms.2009.04.001 ↗
9. Erinc, M., Sillekens, W.H., Mannens, R.G.T.M., and Werkhoven, R.J. (2009, January 15–19). Applicability of existing magnesium alloys as biomedical implant materials. Proceedings of the Magnesium Technology Symposium, San Francisco, CA, USA.
10. Seetharaman, S., Sankaranarayanan, D., and Gupta, M. (2023). Magnesium-Based Temporary Implants: Potential, Current Status, Applications, and Challenges. J. Funct. Biomater., 14.10.3390/jfb14060324 ↗
11. Additive manufacturing of porous magnesium alloys for biodegradable orthopedic implants: Process, design, and modification10.1016/j.jmst.2023.08.072 ↗
12. In vitro corrosion and biocompatibility of binary magnesium alloys10.1016/j.biomaterials.2008.10.021 ↗
13. Extrusion-based additive manufacturing of Mg-Zn alloy scaffolds10.1016/j.jma.2021.11.018 ↗
14. Effect of Zn on mechanical and corrosion properties of Mg-Sc-Zn alloys10.1016/j.jmst.2023.01.058 ↗
15. Mechanical Properties and Corrosion Behavior of Biodegradable Mg–0.5Zr–0.5Ca–xZn Magnesium Alloys10.1002/adem.202201778 ↗
16. Influence of size and distribution of W phase on strength and ductility of high strength Mg-5.1Zn-3.2Y-0.4Zr-0.4Ca alloy processed by indirect extrusion10.1016/j.jmst.2017.11.022 ↗
17. Panemangalore, D.B., Shabadi, R., Gupta, M., and Lesven, L. (2021). Microstructure and Corrosion Behavior of Extruded Mg-Sn-Y Alloys. Metals, 11.10.3390/met11071095 ↗
18. Effects of minor Sr addition on microstructure, mechanical and bio-corrosion properties of the Mg-5Zn based alloy system10.1016/j.jallcom.2016.08.164 ↗
19. Mechanical and corrosion properties of extruded Mg–Zr–Sr alloys for biodegradable implant applications10.1016/j.msea.2021.142192 ↗
20. In vitro interactions of blood, platelet, and fibroblast with biodegradable magnesium-zinc-strontium alloys10.1002/jbm.a.35429 ↗
21. Biocompatibility and biodegradability of Mg–Sr alloys: The formation of Sr-substituted hydroxyapatite10.1016/j.actbio.2012.07.045 ↗
22. Evolution of the microstructure and fracture characteristics of a Mg-Nd-Zn-Zr-Mn alloy through heat treatment and extrusion10.1016/j.jallcom.2018.06.185 ↗
23. Shi, Q.F., Wu, H.S., Gao, Z.S., Wang, D.S., Wang, J.W., Yang, Y.W., and Li, R.X. (2023). The Synergistic Effect of Trace Ag and Hot Extruding on the Microstructure and Properties of a Biodegradable Mg-Zn-Sr-Ag Alloy. Materials, 16.10.3390/ma16196423 ↗
24. Effect of extrusion process on microstructure and mechanical and corrosion properties of biodegradable Mg-5Zn-1.5Y magnesium alloy10.1007/s12613-021-2275-5 ↗
25. Wu, X.F., Xu, C.X., Kuan, J., Zhang, Z.W., Zhang, J.S., and Yang, W.F. (2020). Effects of Hot Extrusion Temperature on Mechanical and Corrosion Properties of Mg-Y-Zn-Zr Biological Magnesium Alloy Containing W Phase and I Phase. Materials, 13.10.3390/ma13051147 ↗
26. Effect of I-phase morphology and microstructure transformation in biomedical Mg-3Zn-1Mn-1Y alloys on vitro degradation behavior in dynamic simulated body fluid10.1007/s10853-021-06091-x ↗
27. Understanding Magnesium Corrosion, A Framework for Improved Alloy Performance10.1002/adem.200310405 ↗
28. Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys10.1016/j.corsci.2019.108419 ↗
29. (2009). Biological Evaluation of Medical Devices. Part 5: Tests for In Vitro Cytotoxicity (Standard No. ISO 10993-5:2009).
30. In-vitro corrosion behavior of the cast and extruded biodegradable Mg-Zn-Cu alloys in simulated body fluid (SBF)10.1016/j.jma.2021.01.002 ↗
31. Effect of die parameters on the grain size, mechanical properties and fracture mechanism of extruded AZ31 magnesium alloys10.1016/j.msea.2020.139887 ↗
32. Microstructure, mechanical properties, cytotoxicity, and bio-corrosion of micro-alloyed Mg–xSn–0.04Mn alloys for biodegradable orthopedic applications: Effect of processing techniques10.1557/s43578-021-00172-y ↗
33. Mechanical properties and biocorrosion resistance of Mg-Nd-Zn-Zr alloy improved by cyclic extrusion and compression10.1016/j.matlet.2012.01.086 ↗
34. Effect of Sr addition on microstructure and elevated temperature mechanical properties of Mg–3Zn–1Y alloy10.1016/j.msea.2015.11.093 ↗
35. Microstructure, electromagnetic shielding effectiveness and mechanical properties of Mg–Zn–Y–Zr alloys10.1016/j.matdes.2014.09.034 ↗
36. Influence of microstructure on the corrosion of diecast AZ91D10.1016/S0010-938X(98)00121-8 ↗
37. Experimental insights toward understanding how the morphology of Mg2Si particles affects degradation behavior of the biodegradable as-cast Mg–Si alloys10.1016/j.intermet.2023.108133 ↗
38. Microstructure and corrosion behavior of as-extruded Mg-xLi-3Al-2Zn-0.2Zr alloys (x = 5, 8, 11wt.%)10.1016/j.corsci.2020.108487 ↗
39. Microstructures, mechanical properties and corrosion behaviors of Mg–Y–Zn–Zr alloys with specific Y/Zn mole ratios10.1016/j.jallcom.2014.10.177 ↗
40. Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys10.1016/j.matdes.2013.06.055 ↗
41. Effect of heat treatment on microstructure and corrosion behavior of Mg-5Al-1Zn-1Sn magnesium alloy10.1016/j.corsci.2021.109759 ↗
42. Effect of friction stir processing on mechanical, in vitro degradation, and biocompatibility behaviour of stir casted Mg-Zn-rare earth oxide composites for biodegradable implant applications10.1016/j.jallcom.2023.172767 ↗
43. Investigation of magnesium corrosion in aerated sodium sulfate solution by electrochemical impedance spectroscopy10.1016/0013-4686(90)87043-2 ↗
44. On the corrosion behaviour of magnesium and its alloys using electrochemical techniques10.1016/S0378-7753(96)02456-1 ↗
45. Effect of heat treatment on corrosion behavior of AZ63 magnesium alloy in 3.5wt.% sodium chloride solution10.1016/j.corsci.2016.05.019 ↗
46. Fabrication of superhydrophobic layered double hydroxide composites to enhance the corrosion-resistant performances of epoxy coatings on Mg alloy10.1016/j.surfcoat.2020.126763 ↗
47. Growth and characterization of Mg(OH)2 film on magnesium alloy AZ3110.1016/j.apsusc.2011.02.017 ↗
48. An investigation of the corrosion mechanisms of WE43 Mg alloy in a modified simulated body fluid solution: The influence of immersion time10.1016/j.corsci.2014.07.015 ↗
49. Alloying and brushite coating improve corrosion resistance of magnesium in a simulated physiological environment10.1016/j.mtcomm.2020.101750 ↗
50. Enhanced corrosion resistance and biocompatibility of biodegradable magnesium alloy modified by calcium phosphate/collagen coating10.1016/j.surfcoat.2020.126318 ↗
51. Nanostructured hydroxyapatite powders produced by a flame-based technique10.1016/j.msec.2009.02.006 ↗
52. Influence of second phase precipitates on mechanical and in-vitro corrosion behaviour of Mg-4Zn-0.5Ca-0.8Mn alloy in optimum homogenized conditions10.1016/j.jma.2022.11.011 ↗
53. An impedance investigation of the mechanism of pure magnesium corrosion in sodium sulfate solutions10.1149/1.2401056 ↗
54. XPS and AFM investigations of annealing induced surface modifications of MgO single crystals10.1016/S0022-0248(02)00852-7 ↗
55. Effect of alloyed Sr on the microstructure and corrosion behavior of biodegradable Mg-Zn-Mn alloy in Hanks’ solution10.1016/j.corsci.2019.06.022 ↗
56. Effect of chloride ion on the anodic polarization behavior of the Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution10.1016/S0010-938X(00)00022-6 ↗
57. Cytocompatibility and early inflammatory response of human endothelial cells in direct culture with Mg-Zn-Sr alloys10.1016/j.actbio.2016.10.020 ↗
58. Enhancement of mechanical properties and corrosion resistance of Mg–Ca alloys through microstructural refinement by indirect extrusion10.1016/j.corsci.2014.01.041 ↗
59. Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy10.1016/j.corsci.2009.10.018 ↗
60. Effect of heat treatment on microstructure, mechanical, corrosion and biocompatibility of Mg-Zn-Zr-Gd-Nd alloy10.1016/j.jallcom.2019.153462 ↗
61. Hemolysis and cytotoxicity mechanisms of biodegradable magnesium and its alloys10.1016/j.msec.2014.08.038 ↗
62. Cytotoxicity of dental alloy extracts and corresponding metal salt solutions10.1177/00220345980770100401 ↗
63. Cytotoxicity evaluation of 43 metal salts using murine fibroblasts and osteoblastic cells10.1002/(SICI)1097-4636(199802)39:2<331::AID-JBM22>3.0.CO;2-E ↗