journal article·2024-05-11Open access

The Impact of Plasma Surface Treatments on the Mechanical Properties and Magnetic Performance of FDM-Printed NdFeB/PA12 Magnets

Ana Damnjanović, Gregor Primc, Rok Zaplotnik, Miran Mozetič, Nataša Kovačević

Materials· Volume 17· Issue 10

Abstract

This study presents a novel approach for improving the interfacial adhesion between Nd–Fe–B spherical magnetic powders and polyamide 12 (PA12) in polymer-bonded magnets using plasma treatments. By applying radio frequency plasma to the magnetic powder and low-pressure microwave plasma to PA12, we achieved a notable enhancement in the mechanical and environmental stability of fused deposition modeling (FDM)-printed Nd-Fe-B/PA12 magnets. The densities of the FDM-printed materials ranged from 92% to 94% of their theoretical values, with magnetic remanence (Br) ranging from 85% to 89% of the theoretical values across all batches. The dual plasma-treated batch demonstrated an optimal mechanical profile with an elastic modulus of 578 MPa and the highest ductility at 21%, along with a tensile strength range of 6 to 7 MPa across all batches. Flexural testing indicated that this batch also achieved the highest flexural strength of 15 MPa with a strain of 5%. Environmental stability assessments confirmed that applied plasma treatments did not compromise resistance to corrosion, evidenced by negligible flux loss in both hygrothermal and bulk corrosion tests. These results highlight plasma treatment’s potential to enhance mechanical strength, magnetic performance, and environmental stability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties of Alloys · Metallic Glasses and Amorphous Alloys · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Kolektor Mobility d.o.o., SI-5280 Idrija, Slovenia

Jožef Stefan International Postgraduate School, SI-1000 Ljubljana, Slovenia

Jozef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana, Slovenia

Funding

European Union’s Horizon 2020 Research and Innovation Program

References (50)

Show source-provided references
1. Ormerod, J., Karati, A., Baghel, A.P.S., Prodius, D., and Nlebedim, I.C. (2023). Sourcing, Refining and Recycling of Rare-Earth Magnets. Sustainability, 15.10.3390/su152014901 ↗
2. Rare Earth Elements as Critical Raw Materials: Focus on International Markets and Future Strategies10.1016/j.resourpol.2012.07.001 ↗
3. Corrosion Losses in Sintered (Nd, Dy)-Fe-B Magnets for Different Geometries10.1109/LMAG.2015.2501404 ↗
4. Recent Development in Bonded NdFeB Magnets10.1016/S0304-8853(01)00609-6 ↗
5. Huber, C., Mitteramskogler, G., Goertler, M., Teliban, I., Groenefeld, M., and Suess, D. (2020). Additive Manufactured Polymer-Bonded Isotropic Ndfeb Magnets by Stereolithography and Their Comparison to Fused Filament Fabricated and Selective Laser Sintered Magnets. Materials, 13.10.3390/ma13081916 ↗
6. Net Shape 3D Printed NdFeB Permanent Magnet10.1002/adem.201700098 ↗
7. Laser Powder Bed Fusion of Nd–Fe–B Permanent Magnets10.1007/s40964-020-00117-7 ↗
8. Process-Structure-Property Relationships in Laser Powder Bed Fusion of Permanent Magnetic Nd-Fe-B10.1016/j.matdes.2021.109992 ↗
9. Binder Jetting: A Novel NdFeB Bonded Magnet Fabrication Process10.1007/s11837-016-1883-4 ↗
10. Loh, G.H., Pei, E., Gonzalez-Gutierrez, J., and Monzón, M. (2020). An Overview of Material Extrusion Troubleshooting. Appl. Sci., 10.10.3390/app10144776 ↗
11. Damnjanović, A., and Kovačević, N. (2023). Influence of Magnet Particle Shape on Magnetic and Environmental Stability of FDM Polymer-Bonded Magnets. Materials, 16.10.3390/ma16082993 ↗
12. Fused Filament Fabrication of Nd-Fe-B Bonded Magnets: Comparison of PA12 and TPU Matrices
13. Parans Paranthaman, M., Yildirim, V., Lamichhane, T.N., Begley, B.A., Post, B.K., Hassen, A.A., Sales, B.C., Gandha, K., and Nlebedim, I.C. (2020). Additive Manufacturing of Isotropic NdFeB PPS Bonded Permanent Magnets. Materials, 13.10.3390/ma13153319 ↗
14. Poly-Ether-Ether-Ketone—Neodymium-Iron-Boron Bonded Permanent Magnets via Fused Filament Fabrication10.1016/j.synthmet.2021.116857 ↗
15. 3D Printing of High Performance Polymer-Bonded PEEK-NdFeB Magnetic Composite Materials10.1186/s42252-020-00006-w ↗
16. Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets10.1038/srep36212 ↗
17. Additive Manufacturing of Highly Dense Anisotropic Nd–Fe–B Bonded Magnets10.1016/j.scriptamat.2020.03.012 ↗
18. 3D Printing of NdFeB Bonded Magnets with SrFe 12 O 19 Addition10.1016/j.jallcom.2018.11.335 ↗
19. 3D Printing of Polymer-Bonded Magnets from Highly Concentrated, Plate-like Particle Suspensions10.1016/j.matdes.2019.108133 ↗
20. (2015). Standard Terminology for Additive Manufacturing—General Principles—Terminology. Standard No. ISO/ASTM 52900:2015.
21. Improving the Stability of Magnetic Fillers in Plastics during Processing
22. Fafenrot, S., Grimmelsmann, N., Wortmann, M., and Ehrmann, A. (2017). Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling. Materials, 10.10.3390/ma10101199 ↗
23. Effect of Silane Coupling Agents on Flowability and Compressibility of Compound for Bonded NdFeB Magnet10.1016/j.jre.2021.05.013 ↗
24. Surface Modification of NdFe12Nx Magnetic Powder Using Silane Coupling Agent KH55010.1016/j.apt.2015.01.011 ↗
25. Enhanced Mechanical Properties and Environmental Stability of Polymer Bonded Magnets Using Three-Step Surface Wet Chemical Modifications of Nd–Fe–B Magnetic Powder10.1016/j.heliyon.2024.e26024 ↗
26. Surface Modification and Refinement of Nd–Fe–B Magnetic Powder Using ITDT and Phosphoric Acid10.1007/s11837-021-04850-4 ↗
27. Plasma Treatment of Polymer Powders—From Laboratory Research to Industrial Application10.1002/ppap.201800133 ↗
28. Plasma Treatment of Polymers for Surface and Adhesion Improvement10.1016/S0168-583X(03)00644-X ↗
29. Plasma-Surface Modification of Biomaterials10.1016/S0927-796X(02)00004-9 ↗
30. Mechanisms of Interfacial Adhesion in Metal-Polymer Composites—Effect of Chemical Treatment10.1016/j.compositesa.2011.03.019 ↗
31. Applications of Highly Non-Equilibrium Low-Pressure Oxygen Plasma for Treatment of Polymers and Polymer Composites on an Industrial Scale10.1088/1361-6587/ab5b50 ↗
32. Šourková, H., and Špatenka, P. (2020). Plasma Activation of Polyethylene Powder. Polymers, 12.10.3390/polym12092099 ↗
33. Surface Modification of the Laser Sintering Standard Powder Polyamide 12 by Plasma Treatments10.1002/ppap.201800032 ↗
34. Treatment of Polymer Powders by Combining an Atmospheric Plasma Jet and a Fluidized Bed Reactor10.1016/j.powtec.2017.11.016 ↗
35. (2021, October 19). MQP-S-11-9 20001 Powder Data Sheet, Magnequench. Available online: https://mqitechnology.com/product/mqp-s-11-9-20001/.
36. (2021, March 10). VESTOSINT® 1111 Natural Color, Evonik. Available online: https://www.vestosint.com/en/polyamide-12-nylon-powders/product-overview-vestosint-polyamide-12-nylon-powders-141941.html.
37. Šourková, H.J., Weberová, Z., Antoň, J., and Špatenka, P. (2022). Wettability and Adhesion of Polyethylene Powder Treated with Non-Equilibrium Various Gaseous Plasma in Semi-Industrial Equipment. Materials, 15.10.3390/ma15020686 ↗
38. Šourková, H., Primc, G., and Špatenka, P. (2018). Surface Functionalization of Polyethylene Granules by Treatment with Low-Pressure Air Plasma. Materials, 11.10.3390/ma11060885 ↗
39. Properties of Metal Injection Molded Products Using Titanate-Containing Binders10.2320/matertrans.48.544 ↗
40. (1996). Plastics–Determination of Tensile Properties–Part 2: Test Conditions for Moulding and Extrusion Plastics. Standard No. ISO-527-2.
41. (2019). Plastics—Determination of Flexural Properties. Standard No. ISO 178:2019.
42. Vesel, A., and Mozetič, M. (2015). Printing on Polymers: Fundamentals and Applications, Elsevier Inc.
43. Primc, G. (2020). Surface Modification of Polyamides by Gaseous Plasma—Review and Scientific Challenges. Polymers, 12.10.3390/polym12123020 ↗
44. Thermodynamic Properties of Liquid and Semicrystalline Linear Aliphatic Polyamides10.1002/polb.1990.090281209 ↗
45. Xanthos, M. (2010). Functional Fillers for Plastics, Second Edition, Chapter 5, Wiley-VCH Verlag GmbH.10.1002/9783527629848 ↗
46. Effects of Porosity on the Mechanical Properties of Additively Manufactured Components: A Critical Review Effects of Porosity on the Mechanical Properties of Additively Manufactured Components: A Critical Review10.1088/2053-1591/abcc5d ↗
47. Can the melt flow index be used to predict the success of fused deposition modelling of commercial poly (lactic acid) filaments into 3D printed materials?10.1080/14658011.2017.1397308 ↗
48. Developments in the Processing and Properties of NdFeb-Type Permanent Magnets10.1016/S0304-8853(02)00334-7 ↗
49. The Improvement of Mechanical and Thermal Properties of Polyamide 12 3D Printed Parts by Fused Deposition Modelling10.3144/expresspolymlett.2017.92 ↗
50. Mechanical Properties of Thermally Cycled Nylon Bonded Nd-Fe-B Permanent Magnets10.1023/B:JMSC.0000044890.42857.7a ↗