Optimum Mix Design and Correlation Analysis of Pervious Concrete
Source abstract
Abstract
Pervious concrete is challenged by the inherent trade-off between permeability and mechanical strength. This study presents a systematic optimization of its mix design to achieve a balance between these properties. Single-factor experiments and an L9(33) orthogonal array test were employed to evaluate the effects of target porosity (14–26%), water–cement ratio (0.26–0.34), sand rate (0–10%), and VMA dosage (0–0.02%). Additionally, Spearman rank correlation analysis and nonlinear regression fitting were utilized to develop quantitative relationships correlating the measured porosity to material performance. The results revealed that increasing target porosity enhances permeability but reduces compressive and splitting tensile strengths. The optimal water-to-cement ratio (w/c) was found to be 0.32, balancing both permeability and strength. An appropriate sand content of 6% improved mechanical properties, while a VMA dosage of 0.01% effectively enhanced bonding strength and workability. The orthogonal experiment identified the optimal mix ratio as a w/c ratio of 0.3, VMA dosage of 0.12%, target porosity of 14%, and sand content of 7%, achieving a compressive strength at 28-days of 43.5 MPa and a permeability coefficient of 2.57 mm·s−1. Empirical relationships for the permeability coefficient and mechanical properties as functions of the measured porosity were derived, demonstrating a positive exponential correlation between the measured porosity and the permeability coefficient, and a negative correlation with compressive and splitting tensile strengths. This research provides a systematic framework for designing high-performance pervious concrete with balanced permeability and mechanical properties, offering valuable insights for its development and application in green infrastructure projects.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Urban Stormwater Management Solutions · Infrastructure Maintenance and Monitoring · Diabetic Foot Ulcer Assessment and Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering, Wanjiang University of Technology, Ma’anshan 243031, China
References (40)
Show source-provided references
1. Pervious concrete as an alternative pavement strategy: A state-of-the-art review10.1080/10298436.2018.1554217 ↗
2. Quantification of effective flow resistivity for parametric assessment of pervious concrete by using ultrasonic pulse velocity method10.1177/03611981231160175 ↗
3. Zhang, X., Lei, C., Li, Z., Zhang, A., Zhao, W., Zhang, W., Xu, J., and Guo, P. (2022). Effect of cellulose nanofibrils on the physical properties and frost resistance of pervious concrete. Materials, 15.10.3390/ma15227906 ↗
4. Investigation of the properties of pervious concrete with a recycled aggregate designed with a new combination of admixture10.1016/j.conbuildmat.2022.127710 ↗
5. Pervious concrete: A state-of-the-art review
6. Field performance monitoring of pervious concrete pavements10.1080/14680629.2023.2176164 ↗
7. Mechanical behavior and water infiltration of pervious concrete incorporating recycled asphalt pavement aggregate
8. State of the art on the mechanical properties of pervious concrete10.1080/19648189.2021.2008511 ↗
9. Compression response of normal and high strength pervious concrete10.1016/j.conbuildmat.2016.01.051 ↗
10. Investigation on the properties of porous concrete as road base material10.1016/j.conbuildmat.2017.09.151 ↗
11. Yeon, J.H., Choi, Y., Yang, C., and Yeon, K. (2023). Effect of Polymer Paste Content on the Porosity and Strength of Pervious Polymer Concrete. International Congress on Polymers in Concrete, 2023, Springer.10.1007/978-3-031-72955-3_26 ↗
12. Ichimaru, S. (2020). Meso-Mechanical Modeling of Pervious Concrete, University of California, Davis.
13. Effects of superplasticizer dosage on cement slurry rheological characteristics, pore structure and properties of pervious concrete10.1016/j.conbuildmat.2025.141457 ↗
14. Pervious concrete for desired porosity: Influence of w/c ratio and a rheology-modifying admixture10.1016/j.conbuildmat.2020.121084 ↗
15. Characterization of thixotropic properties of fresh cement-based materials10.1002/suco.202300220 ↗
16. Effect of mix proportions on rheology and permeability of cement grouts containing viscosity modifying admixture10.1016/j.conbuildmat.2019.04.022 ↗
17. Methodology to develop pervious concrete mixtures for target properties emphasizing the selection of mixture variables10.1061/JPEODX.0000061 ↗
18. Developing high strength pervious concrete mixtures with local materials
19. Experimental investigation on the properties of sustainable pervious concrete with different aggregate gradation10.1186/s40069-023-00625-0 ↗
20. Pan, T., Jiang, Y., He, H., Wang, Y., and Yin, K. (2021). Effect of structural build-up on interlayer bond strength of 3D printed cement mortars. Materials, 14.10.3390/ma14020236 ↗
21. Xu, K., Yang, J., He, H., Wei, J., and Zhu, Y. (2025). Influences of Additives on the Rheological Properties of Cement Composites: A Review of Material Impacts. Materials, 18.10.3390/ma18081753 ↗
22. Experimental evaluation of freeze-thaw durability of pervious concrete10.1016/j.jobe.2020.101617 ↗
23. Mix design for recycled aggregate pervious concrete based on response surface methodology10.1016/j.conbuildmat.2020.119776 ↗
24. Influence of pore structure characteristics on the mechanical and durability behavior of pervious concrete material based on image analysis10.1186/s40069-020-00404-1 ↗
25. Aggregate effects on pervious portland cement concrete static modulus of elasticity10.1061/(ASCE)0899-1561(2007)19:7(561) ↗
26. Recycling of waste ceramic foams as fine aggregates in pervious concrete10.1039/C9RA09070C ↗
27. Strength and abrasion characteristics of pervious concrete10.1080/14680629.2019.1596828 ↗
28. Experimental study on the effects of fine sand addition on differentially compacted pervious concrete10.1016/j.conbuildmat.2015.05.012 ↗
29. Development of framework for ranking pervious concrete pavement mixtures: Application of multi-criteria decision-making methods10.1080/10298436.2021.2021406 ↗
30. Mechanical and permeability analysis and optimization of recycled aggregate pervious concrete based on response surface method10.32604/jrm.2022.024380 ↗
31. Optimizing pervious concrete pavement mixture design by using the Taguchi method10.1016/j.conbuildmat.2015.10.094 ↗
32. Comprehensive investigation of permeability characteristics of pervious concrete: A hydrodynamic approach10.1016/j.conbuildmat.2016.07.035 ↗
33. Prediction of permeability and unconfined compressive strength of pervious concrete using evolved support vector regression10.1016/j.conbuildmat.2019.02.117 ↗
34. Pore characteristics of pervious concrete and their influence on permeability attributes10.1016/j.conbuildmat.2022.126874 ↗
35. Influence of aggregate size on compressive strength of pervious concrete10.1016/j.conbuildmat.2019.03.140 ↗
36. The role of aggregate and cement paste in the deterioration of the transitional interface zone of pervious concrete during freeze-thaw cycles
37. Influence of water-to-cement ratio on hydration kinetics: Simple models based on spatial considerations10.1016/j.cemconres.2005.04.014 ↗
38. Research on the particle characteristics of manufactured sands affecting the flow ability of fresh mortar10.1016/j.conbuildmat.2023.131287 ↗
39. Bear, J. (2013). Dynamics of Fluids in Porous Media, Courier Corporation.
40. Pervious concrete: Effects of porosity on permeability and strength10.1680/jmacr.19.00194 ↗