Study on the Ultimate Load Failure Mechanism and Structural Optimization Design of Insulators
Source abstract
Abstract
This study aims to enhance the productivity of high-voltage transmission line insulators and their operational safety by investigating their failure mechanisms under ultimate load conditions. Destructive tests were conducted on a specific type of insulator under ultimate load conditions. A high-speed camera was used to document the insulator’s failure process and collect strain data from designated points. A simulation model of the insulator was established to predict the effects of ultimate loads. The simulation results identified a maximum first principal stress of 94.549 MPa in the porcelain shell, with stress distribution characteristics resembling a cantilever beam subjected to bending. This implied that the insulator failure occurred when the stress reached the bending strength of the porcelain shell. To validate the simulation’s accuracy, bending and tensile strength tests were conducted on the ceramic materials constituting the insulator. The bending strength of the porcelain shell was 100.52 MPa, showing a 5.6% variation from the simulation results, which indicated the reliability of the simulation model. Finally, optimization designs on the design parameters P1 and P2 of the insulator were conducted. The results indicated that setting P1 to 8° and P2 to 90.062 mm decreased the first principal stress of the porcelain shell by 47.6% and Von Mises stress by 31.6% under ultimate load conditions, significantly enhancing the load-bearing capacity. This research contributed to improving the production yield and safety performance of insulators.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Thermal Analysis in Power Transmission · Power Line Inspection Robots
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Science, Inner Mongolia University of Technology, Hohhot 010051, China
Faculty of Architecture, Civil and Transportation Engineering, Beijing University of Technology, Beijing 100124, China
School of Mathematics and Physics, University of Science and Technology, Beijing 100084, China
School of Civil Engineering, Hebei University of Engineering, Handan 056000, China
References (45)
Show source-provided references
1. Outdoor HV composite polymeric insulators10.1109/TDEI.1999.9286745 ↗
2. Global experience of HVDC composite insulators in outdoor and indoor environment10.1515/rams-2020-0050 ↗
3. Stress and damage analysis of composite–aluminium joints used in electrical insulators subject to traction and bending10.1016/j.compstruct.2003.09.005 ↗
4. Porcelain insulation—Defining the underlying mechanism of failure10.1049/hve.2019.0004 ↗
5. Seismic testing and modeling of cylindrical electrical equipment with GFRP composite insulators10.1016/j.compstruct.2018.02.036 ↗
6. Finite element analysis of substation composite insulators10.1016/0266-3538(95)00120-4 ↗
7. Insulator detection and damage identification based on improved lightweight YOLOv4 network10.1016/j.egyr.2021.10.039 ↗
8. Experimental investigation on the accelerated aging of silicone rubber insulators based on thermal stress10.1016/j.ijepes.2023.109049 ↗
9. Non-destructive analysis of power insulators by frequency response function and three dimensional-computed tomography10.1016/j.ymssp.2022.109310 ↗
10. Qiu, Z., Zhu, X., Liao, C., Shi, D., and Qu, W. (2022). Detection of Transmission Line Insulator Defects Based on an Improved Lightweight YOLOv4 Model. Appl. Sci., 12.10.3390/app12031207 ↗
11. Stress and failure analysis of crimped metal–composite joints used in electrical insulators subjected to bending10.1016/j.compositesa.2009.02.020 ↗
12. Design of a cylindrical high-voltage high-temperature vacuum insulator10.1109/TDEI.2003.1194105 ↗
13. Ensemble learning methods using the Hodrick–Prescott filter for fault forecasting in insulators of the electrical power grids10.1016/j.ijepes.2023.109269 ↗
14. Fabrication and assessment of reinforced ceramic electrical insulator from bamboo leaf ash waste10.1016/j.jallcom.2020.153703 ↗
15. Optimization of Stresses in the End-Fittings of Composite Insulators for Distribution and Transmission Lines10.1177/073168449601500502 ↗
16. A review on corrosion, mechanical, and electrical properties of glass fiber-reinforced epoxy composites for high-voltage insulator core rod applications: Challenges and recommendations10.1007/s00289-021-03846-z ↗
17. Superhydrophobic nanocomposite coatings based on different polysiloxane matrices designed for electrical insulators10.1016/j.porgcoat.2022.106867 ↗
18. Simulation based electric stress estimation on silicone rubber polymeric insulators under multi-environmental conditions10.1016/j.epsr.2022.108840 ↗
19. Controlling electrical stress of polymeric insulators using zinc oxide microvaristor10.1016/j.matlet.2023.135202 ↗
20. An investigation of dynamic mechanical, thermal, and electrical properties of housing materials for outdoor polymeric insulators10.1016/j.eurpolymj.2004.03.014 ↗
21. Electrical and structural R&D activities on high voltage dc solid insulator in vacuum10.1016/j.fusengdes.2015.05.057 ↗
22. Summary of insulator defect detection based on deep learning10.1016/j.epsr.2023.109688 ↗
23. Liu, C., Wu, Y., Liu, J., Sun, Z., and Xu, H. (2021). Insulator Faults Detection in Aerial Images from High-Voltage Transmission Lines Based on Deep Learning Model. Appl. Sci., 11.10.3390/app11104647 ↗
24. Han, S.W., Cho, H.G., Woo, B.C., Han, D.H., Lee, D.I., Choi, I.H., and Shin, T.W. (2003, January 1–5). Simulation on interface mechanical stress in porcelain insulators for transmission line by cement growth using ANSYS/NASTRAN program. Proceedings of the 7th International Conference on Properties and Applications of Dielectric Materials (Cat. No. 03CH37417), Nagoya, Japan.10.1109/ICPADM.2003.1218438 ↗
25. Response of composite insulators to dynamic mechanical loads10.1109/61.107301 ↗
26. Mechanical behavior of electrical hollow composite post insulators: Experimental and analytical study10.1016/j.engstruct.2015.03.013 ↗
27. Analyses of composite insulators with crimped end-fittings: Part II—Suitable crimping conditions10.1016/S0266-3538(02)00067-2 ↗
28. Optimization of resin content to improve electrical and mechanical properties of polymer-concrete line-post insulators used in electrical distribution networks10.1016/j.epsr.2023.109357 ↗
29. Optimal design of high voltage composite insulators with grading rings in different configurations10.1016/j.epsr.2023.109493 ↗
30. Three-dimensional computed tomography and composition analysis of porcelain insulators for 154 kV power transmission lines10.1109/TDEI.2018.007553 ↗
31. The impact of cap orientation on mechanical strength of high voltage devices and a novel design for improvement10.1007/s40430-022-03364-7 ↗
32. A Study on the Life-Time Assessment Ways and Various Failure Types of 154 kV Porcelain Insulators Installed in South Korea10.1007/s42341-018-0027-7 ↗
33. Finite element modeling and assessment of seismic response of electrical substations porcelain post insulators10.1016/j.soildyn.2021.106895 ↗
34. Enhanced bending strength and microwave dielectric properties of Li2MgTi3O8 ceramics by adding Si3N4 reinforcing phase10.1016/j.ceramint.2022.06.215 ↗
35. Fracture model of meso-ceramics based on relative size and prediction of fracture toughness and bending strength10.1016/j.ceramint.2023.08.186 ↗
36. The bending strength temperature dependence of the directionally solidified eutectic LaB6–ZrB2 composite10.1016/j.jallcom.2011.02.176 ↗
37. Deformation behavior and bending strength of single crystal 8 mol% yttria-stabilized zirconia at microscopic scale10.1016/j.jeurceramsoc.2023.09.042 ↗
38. Bending strength and crack-healing behavior of Al2O3/SiC composites ceramics10.1016/j.msea.2006.09.169 ↗
39. Some features of formation of the structural strength of ceramic materials10.1007/BF02355530 ↗
40. Mechanisms of fatigue-crack propagation in ductile and brittle solids10.1023/A:1018655917051 ↗
41. On the multi-objective perspective of discrete topology optimization in fluid-structure interaction problems10.1016/j.apm.2023.11.024 ↗
42. Structural topology optimization of three-dimensional multi-material composite structures with finite deformation10.1016/j.compstruct.2023.117692 ↗
43. STO-DAMV: Sequential topology optimization and dynamical accelerated mean value for reliability-based topology optimization of continuous structures10.1016/j.cma.2023.116429 ↗
44. EMsFEM based concurrent topology optimization method for hierarchical structure with multiple substructures10.1016/j.cma.2023.116549 ↗
45. Optimized structure design of asymmetrical Mg alloy cerebrovascular stent with high flexibility