journal article·2022-09-27Open access

Influence of the Heterogeneity of the Core Material on the Local Instability of a Sandwich Panel

Zbigniew Pozorski, Jolanta Pozorska

Materials· Volume 15· Issue 19

Abstract

The problem of local instability in the compressed facing of a sandwich panel is considered in the paper. The case of a facing resting on an infinite core is examined, but the validity of such a simplification has been discussed in detail. An energy approach is used to solve the problem. The general procedure for considering the influence of the core parameter variability on the value of stress causing the facing instability is presented. Expressions allowing us to calculate the wrinkling stress were derived, which was the main aim of the research. The heterogeneity of the core material is taken into account by using continuous functions describing the variability of the core material parameters. In the examples illustrating the theory, the exponential and polynomial functions were used. The examples are based on the actually measured elastic modules of the core. The presented considerations were extended to the analysis of strain energies, which confirmed that the properties of the layer adjacent to the facing (up to 2 cm thick) determine the value of the wrinkling stress. The paper presents an example of the optimization of core material parameters in which a change in the distribution of the core parameters led to an approximately threefold increase in the wrinkling strength of the sandwich panel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Structure Analysis and Optimization · Structural Analysis and Optimization · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Structural Analysis, Faculty of Civil and Transport Engineering, Poznan University of Technology, ul. Piotrowo 5, 60-965 Poznań, Poland

Department of Mathematics, Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, Armii Krajowej 21, 42-201 Częstochowa, Poland

Funding

Poznan University of Technology · Czestochowa University of Technology

References (25)

Show source-provided references
1. Buckling of Sandwich Type Panels10.2514/8.11246 ↗
2. Plantema, F.J. (1966). Sandwich Construction; The Bending and Buckling of Sandwich Beams, Plates and Shells, John Wiley & Sons, Inc.
3. Allen, H.G. (1969). Analysis and Design of Structural Sandwich Panels, Pergamon Press.10.1016/B978-0-08-012870-2.50006-7 ↗
4. Norris, C.B., Ericksen, W.S., March, H.W., Smith, C.B., and Boller, K.H. (1961). Wrinkling of the Facing of Sandwich Construction Subjected to Edgewise Compression, Forest Products Laboratory. Report No. 1810.
5. Wrinkling of thick orthotropic sandwich plates under general loading conditions10.1007/s004199900065 ↗
6. Wrinkling of composite-facing sandwich panels under biaxial loading10.1177/1099636204033643 ↗
7. Effects of anisotropy and multiaxial loading on the wrinkling of sandwich panels10.1177/109963205048525 ↗
8. Symmetrical facing wrinkling of composite sandwich panels10.1177/1099636208097196 ↗
9. On wrinkling of a sandwich panel with a compliant core and self-equilibrated loads10.1177/1099636211419131 ↗
10. Recent results on the effect of the transverse core compressibility on the static and dynamic response of sandwich structures10.1016/j.compositesb.2007.02.007 ↗
11. Wrinkling of sandwich wide panels/beams based on the extended high-order sandwich panel theory: Formulation, comparison with elasticity and experiments10.1007/s00419-012-0673-x ↗
12. Wrinkling in sandwich structures with a functionally graded core10.1115/1.4034990 ↗
13. Einfluss von Inhomogenitäten im Kernwerkstoff von Sandwichelementen auf die Tragfähigkeit10.1002/stab.201201634 ↗
14. Face wrinkling of sandwich beams under pure bending
15. Non-linear wrinkling of a sandwich panel with functionally graded core—Extended high-order approach10.1016/j.ijsolstr.2018.02.023 ↗
16. Mechanics of morphological instabilities and surface wrinkling in soft materials: A review10.1039/c2sm00011c ↗
17. Lv, H., Deng, J., Ren, Y., Zhang, H., Zhang, W., Zhang, M., Liu, H., and Gu, B. (2022). Preparation and Band Gap Characteristics of Composite Film/Substrate Instability System. Materials, 15.10.3390/ma15186248 ↗
18. Tunable hierarchical wrinkling: From models to applications10.1063/1.5143651 ↗
19. Microarchitecture for a Three-Dimensional Wrinkled Surface Platform10.1002/adma.201405851 ↗
20. Lou, J., Zhang, J., Wang, D., and Fan, X. (2021). Improving the Dyeability and Anti-Wrinkle Properties of Cotton Fabric via Oxidized Raffinose. Appl. Sci., 11.10.3390/app11104641 ↗
21. Optimal design of sandwich panels with hybrid core10.1177/1099636217742574 ↗
22. Mechanical performances of metal-polymer sandwich structures with 3D-printed lattice cores subjected to bending load10.1007/s43452-020-00095-1 ↗
23. The Influence of the Core Orthotopy on the Wrinkling of Sandwich Panels10.17512/jamcm.2015.4.13 ↗
24. Pozorski, Z., Pozorska, J., Kreja, I., and Smakosz, Ł. (2021). On Wrinkling in Sandwich Panels with an Orthotropic Core. Materials, 14.10.3390/ma14175043 ↗
25. Hammarberg, S., Kajberg, J., Larsson, S., Moshfegh, R., and Jonsén, P. (2021). Novel Methodology for Experimental Characterization of Micro-Sandwich Materials. Materials, 14.10.3390/ma14164396 ↗