A State-Based Peridynamic Flexural Fatigue Model for Contact and Bending Conditions
Source abstract
Abstract
To address flexural fractures and predict fatigue life, an ordinary state-based peridynamic (PD) fatigue model is proposed for the initiation and propagation of flexural fractures. The key to this model is to replace the traditional partial differential fracture model with a spatially integral peridynamic model. Based on the contact and slip theory, the nonlocal peridynamic contact algorithm is confirmed and the load transfer is through the contact area. With the 3D peridynamic J-integration and the energy-based bond failure criterion, the peridynamic fatigue model for flexural cracks’ initiation and propagation is constructed. The peridynamic solid consists of a pair of gear contact surfaces and the formation and growth of flexural fatigue cracks evolved naturally over many loading cycles. The repeated load is transferred from the drive gear to the follower gear using the nonlocal peridynamic contact algorithm. The improved adaptive dynamic relaxation approach is used to determine the static solution for each load cycle. The fatigue bending crack angle errors are within 2.92% and the cycle number errors are within 10%. According to the experimental results, the proposed peridynamic fatigue model accurately predicts the location of the crack without the need for additional criteria and the fatigue life predicted by the simulation agrees quite well with the experimental results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Numerical methods in engineering · Mechanical stress and fatigue analysis · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China
CSSC Systems Engineering Research Institute, Beijing 100094, China
Funding
General Projects of National Natural Science Foundation of China · Ten Thousand Talents Program
References (64)
Show source-provided references
1. Graded materials for resistance to contact deformation and damage10.1126/science.1059716 ↗
2. Richard, H.A., and Sander, M. (2016). Fatigue Crack Growth, Springer.10.1007/978-3-319-32534-7 ↗
3. Fatigue fracture and fatigue life assessment of railway wheel using non-linear model for fatigue crack growth10.1016/j.ijfatigue.2021.106516 ↗
4. Simulating coupling behavior of spur gear meshing and fatigue crack propagation in tooth root10.1016/j.ijfatigue.2019.105381 ↗
5. Influence of different load models on gear crack path shapes and fatigue lives10.1111/j.1460-2695.2008.01229.x ↗
6. Fatigue crack initiation and propagation under cyclic contact loading10.1016/j.engfracmech.2009.02.005 ↗
7. Rolling contact fatigue in refurbished case carburized bearings10.1016/j.triboint.2017.05.026 ↗
8. Numerical analysis of contact stress and strain distributions for greased and ungreased high loaded oscillating bearings10.1016/j.wear.2016.11.037 ↗
9. 3D modeling of subsurface fatigue crack nucleation potency of primary inclusions in heat treated and shot peened martensitic gear steels10.1016/j.ijfatigue.2008.12.001 ↗
10. Stress concentration factors in tubular T/Y-connections reinforced with FRP under in-plane bending load10.1016/j.marstruc.2020.102871 ↗
11. Surface initiated tooth flank damage: Part I: Numerical model10.1016/j.wear.2009.06.020 ↗
12. Contact fatigue damage analysis of shot peened gears by means of X-ray measurements10.1016/j.engfailanal.2008.08.020 ↗
13. Fatigue behavior of typical details of orthotropic steel bridges in multiaxial stress states using traction structural stress10.1016/j.ijfatigue.2020.105862 ↗
14. A model for the simulation of the interactions between dynamic tooth loads and contact fatigue in spur gears10.1016/j.triboint.2011.03.024 ↗
15. Numerical simulation of surface pitting due to contact loading10.1016/S0142-1123(01)00020-2 ↗
16. Finite Element Analysis and Experiments for Predicting Fatigue and Rolling Contact Fatigue Behavior of Spur Gears10.3311/PPme.18423 ↗
17. Boundary element analysis of surface initiated rolling contact fatigue cracks in wheel/rail contact systems10.1016/S0043-1648(02)00080-7 ↗
18. Numerical study on rolling contact fatigue in rail steel under the influence of periodic overload10.1016/j.engfailanal.2020.104624 ↗
19. Three-dimensional study of rolling contact fatigue using crystal plasticity and cohesive zone method10.1016/j.ijfatigue.2019.105208 ↗
20. A displacement-based and explicit non-planar 3D crack propagation model in the generalized/extended finite element method10.1016/j.tafmec.2020.102647 ↗
21. Computation of T-stresses for multiple-branched and intersecting cracks with the numerical manifold method10.1016/j.enganabound.2019.07.011 ↗
22. On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting10.1016/j.ijfatigue.2019.03.019 ↗
23. On fatigue life prediction of Al-alloy 2024 plates in riveted joints10.1016/j.istruc.2021.05.055 ↗
24. Investigating the effect of retained austenite and residual stress on rolling contact fatigue of carburized steel with XFEM and experimental approaches10.1016/j.msea.2018.06.078 ↗
25. Critical factors for determining a first estimate of fatigue limit of bearing steels under rolling contact fatigue10.1016/j.ijfatigue.2018.08.004 ↗
26. Singular and non-singular approaches for predicting fatigue crack growth behavior10.1016/j.ijfatigue.2005.07.018 ↗
27. Perturbation method for solving the nonlinear eigenvalue problem arising from fatigue crack growth problem in a damaged medium10.1016/j.apm.2013.11.057 ↗
28. Cyclic plastic deformation response at fatigue crack tips10.1016/j.ijpvp.2012.10.007 ↗
29. Advanced analysis of crack tip plastic zone under cyclic loading10.1016/j.ijfatigue.2016.08.013 ↗
30. Open gear rolling contact fatigue life prediction by a numerical approach10.1115/1.4054728 ↗
31. Finite Element Analysis on Design Optimized Bevel Gear Pair to Check Its Durability10.4271/15-15-01-0005 ↗
32. Correia, J.A., De Jesus, A.M., Fernandes, A.A., and Calçada, R. (2019). Mechanical Fatigue of Metals: Experimental and Simulation Perspectives, Springer.10.1007/978-3-030-13980-3 ↗
33. Muñiz-Calvente, M., and Fernández-Canteli, A. (2020). Probabilistic Mechanical Fatigue and Fracture of Materials. Materials, 13.10.3390/ma13214901 ↗
34. Three-dimensional fracture and fatigue crack propagation analysis in structures with multiple cracks10.1016/j.compstruc.2015.06.012 ↗
35. Minimum energy multiple crack propagation. Part I: Theory and state of the art review10.1016/j.engfracmech.2017.07.028 ↗
36. Failure analysis of coal pulveriser gear box10.1016/j.engfailanal.2006.06.002 ↗
37. Study on the relation between surface integrity and contact fatigue of carburized gears10.1016/j.ijfatigue.2022.107203 ↗
38. Fretting fatigue crack initiation mechanism in Ti–6Al–4V10.1046/j.1460-2695.2002.00549.x ↗
39. The physics of fatigue crack initiation10.1016/j.ijfatigue.2012.10.009 ↗
40. Fretting fatigue crack nucleation: A review10.1016/j.triboint.2018.01.029 ↗
41. Numerical simulation of fish-eye fatigue crack growth in very high cycle fatigue10.1016/j.engfracmech.2015.01.010 ↗
42. A continuum damage mechanics approach for fretting fatigue under out of phase loading10.1016/j.triboint.2017.08.009 ↗
43. Numerical analysis of quasi-static crack branching in brittle solids by a modified displacement discontinuity method10.1016/j.ijsolstr.2014.01.022 ↗
44. A boundary element method formulation for quasi-brittle material fracture analysis using the continuum strong discontinuity approach10.1016/j.engfracmech.2018.09.012 ↗
45. A damage model for the simulation of delamination in advanced composites under variable-mode loading10.1016/j.mechmat.2005.10.003 ↗
46. Gradient damage models coupled with plasticity: Variational formulation and main properties10.1016/j.mechmat.2013.12.005 ↗
47. Peridynamic states and constitutive modeling10.1007/s10659-007-9125-1 ↗
48. Analysis and Comparison of Different Approximations to Nonlocal Diffusion and Linear Peridynamic Equations10.1137/13091631X ↗
49. Asymptotically Compatible Schemes and Applications to Robust Discretization of Nonlocal Models10.1137/130942644 ↗
50. Numerical methods for nonlocal and fractional models10.1017/S096249292000001X ↗
51. Adaptive Refinement and Multiscale Modeling in 2D Peridynamics10.1615/IntJMultCompEng.2011002793 ↗
52. Concurrent Coupling of Bond-based Peridynamics and the Navier Equation of Classical Elasticity by Blending10.1615/IntJMultCompEng.2014011338 ↗
53. Nonlocal and Mixed-locality Multiscale Finite Element Methods10.1137/16M1090351 ↗
54. Peridynamic Theory of Solid Mechanics10.1016/S0065-2156(10)44002-8 ↗
55. Madenci, E., and Oterkus, E. (2014). Peridynamic theory. Peridynamic Theory and Its Applications, Springer.10.1007/978-1-4614-8465-3 ↗
56. Littlewood, D.J., and Vogler, T. (2011). Modeling Dynamic Fracture with Peridynamics Finite Element Modeling and Contact, Sandia National Lab.10.1115/IMECE2010-40621 ↗
57. Peridynamic modeling of frictional contact10.1007/s42102-019-00012-y ↗
58. Reformulation of elasticity theory for discontinuities and long-range forces10.1016/S0022-5096(99)00029-0 ↗
59. Combined finite element and peridynamic analyses for predicting failure in a stiffened composite curved panel with a central slot10.1016/j.compstruct.2011.07.019 ↗
60. An energy-based peridynamic model for fatigue cracking10.1016/j.engfracmech.2020.107373 ↗
61. Silling, S.A., and Askari, A. (2014). Peridynamic MODEL for Fatigue Cracking, Sandia National Lab.10.2172/1160289 ↗
62. Validation of a peridynamic model for fatigue cracking10.1016/j.engfracmech.2016.05.008 ↗
63. A 2D peridynamic model for fatigue crack initiation of railheads10.1016/j.ijfatigue.2020.105536 ↗
64. Crack growth modeling and simulation of a peridynamic fatigue model based on numerical and analytical solution approaches10.1016/j.tafmec.2021.103026 ↗