journal article·2022-11-08Open access

Laminate Design of Carbon-Fiber-Reinforced Resin Matrix Composites for Optimized Mechanical Properties and Electrical Conductivity

Hongxue Tan, Yanxiang Wang, Chengguo Wang, Chengjuan Wang, Mengfan Li, Haotian Jiang, Zhenhao Xu

Materials· Volume 15· Issue 22

Abstract

Carbon fiber composites as pantograph slide materials are in the development stage, in which copper is the conductive phase, and the addition form and size need to be designed. Herein, the effects of the copper morphology, the size of the copper mesh on the performance, and the influence of the contact mode between the sliding plate and bracket on the temperature rise were compared and analyzed. The resistivity is 11.2 μΩ·m with the addition of 20 wt% copper mesh, a relative reduction of 91.77%. Importantly, the impact strength is increased by 14.19%, and the wear is reduced by 13.21%; hence, the copper mesh laid in layers is the ideal structure. Further study of the distribution and quality of the copper mesh shows that the resistivity is related only to the quality of the copper mesh; in addition, the number of layers of the copper mesh cannot exceed 16, and it is determined that the best type of copper mesh is 5#. Notably, the performance can be improved by appropriately reducing the thickness of the copper mesh and increasing the aperture while the sliding plate and the bracket are connected by copper mesh with conductive adhesive, which has the slowest heating rate of 2.27 °C/min and the smallest resistance. Therefore, the influence of copper content and distribution on the electrical conductivity are systematically investigated, and the mechanical properties and electrical conductivity are optimized through the design of the laminate structure of the compound material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrical Contact Performance and Analysis · Electromagnetic wave absorption materials · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory for Liquid−Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan 250061, China

Carbon Fiber Engineering Research Center, School of Materials Science and Engineering, Shandong University, Jinan 250061, China

Funding

Natural Science Foundation of Shandong Province · National Natural Science Foundation of China

References (38)

Show source-provided references
1. Information-Based Construction of High-Speed Railway Tunnel
2. 5G Key Technologies for Smart Railways10.1109/JPROC.2020.2988595 ↗
3. On the road: Access to transportation infrastructure and economic growth in China10.1016/j.jdeveco.2020.102442 ↗
4. Pollution abatement costs change decomposition for airlines: An analysis from a dynamic perspective10.1016/j.tra.2018.03.014 ↗
5. Renewable Energy Sources Integration and Control in Railway Microgrid10.1109/TIA.2018.2878143 ↗
6. Influence of the Crosswind on the Pantograph Arcing Dynamics10.1109/TPS.2020.3010553 ↗
7. Microstructure and Current Carrying Wear Behaviors of Copper/Sintered–Carbon Composites for Pantograph Sliders10.1007/s12540-020-00652-6 ↗
8. Mechanical and wear performances of aluminum/sintered-carbon composites produced by pressure infiltration for pantograph sliders10.1016/j.powtec.2017.12.027 ↗
9. Tribological properties of pure carbon strip affected by dynamic contact force during current-carrying sliding10.1016/j.triboint.2017.12.032 ↗
10. Friction and Wear Behavior of Pantograph Strips Sliding Against Copper Contact Wire with Electric Current10.1016/j.aasri.2012.09.048 ↗
11. A procedure for the wear prediction of collector strip and contact wire in pantograph–catenary system10.1016/j.wear.2008.05.006 ↗
12. State sensitivity analysis of the pantograph system for a high-speed rail vehicle considering span length and static uplift force10.1016/j.jsv.2006.06.073 ↗
13. Ramesh, B., Elsheikh, A.H., Satishkumar, S., Shaik, A.M., Djuansjah, J., Ahmadein, M., Moustafa, E.B., and Alsaleh, N.A. (2022). The Influence of Boron Carbide on the Mechanical Properties and Bonding Strength of B4C/Nickel 63 Coatings of Brake Disc. Coatings, 12.10.3390/coatings12050663 ↗
14. Mohammed, M.M., Elsayed, E.M., El-Kady, O.A., Alsaleh, N.A., Elsheikh, A.H., Essa, F.A., Ahmadein, M., and Djuansjah, J. (2022). Electrochemical Behavior of Cu-MWCNT Nanocomposites Manufactured by Powder Technology. Coatings, 12.10.3390/coatings12030409 ↗
15. Tribological Performance of Gradient Ag-Multilayer Graphene/TC4 Alloy Self-Lubricating Composites Prepared By Laser Additive Manufacturing10.1080/10402004.2021.1922789 ↗
16. Zhang, C.H., Zhang, J.B., Qu, M.C., and Zhang, J.N. (2010). Toughness properties of basalt/carbon fiber hybrid composites. International Conference on Advances in Materials and Manufacturing Processes, Trans Tech Publications Ltd.10.4028/www.scientific.net/AMR.150-151.732 ↗
17. Facing opportunity and challenge of carbon fiber and polymer matrix composites industry development
18. Kumar, N.K., Kiran, B.C., Rao, B.C., and Hussain, M.M. (2022). A Review on Carbon Reinforcements in Glass Fiber Polymer Matrix Composites. Innovations in Mechanical Engineering: Select Proceedings of ICIME 2021, Springer. Lecture Notes in Mechanical Engineering.
19. Casalotti, A., Lanzara, G., and Snyder, M.P. (2019, January 9–11). Towards highly reconfigurable carbon fiber composite. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2019), Louisville, KY, USA.10.1115/SMASIS2019-5677 ↗
20. Casalotti, A., Chinnam, K.C., and Lanzara, G. (2018, January 10–12). Self-adaptable carbon fiber composite. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2018), San Antonio, TX, USA.
21. Elsheikh, A. (2022). Bistable Morphing Composites for Energy-Harvesting Applications. Polymers, 14.10.3390/polym14091893 ↗
22. Carbon Fibre Reinforced Composite Material: Review of Properties and Processing for various Metal Matrix Materials10.1088/1757-899X/810/1/012014 ↗
23. Recent Developments in Carbon Fibers and Carbon Nanotube-Based Fibers: A Review10.1080/15583724.2016.1169546 ↗
24. Recent Progress in Fabrication, Structure, and Properties of Carbon Fibers10.1080/15583724.2012.705410 ↗
25. Continuous in-situ growth of carbon nanotubes on carbon fibers at various temperatures for efficient electromagnetic wave absorption10.1016/j.carbon.2022.08.053 ↗
26. Wang, C., Wang, Y., and Su, S. (2021). Optimization of Process Conditions for Continuous Growth of CNTs on the Surface of Carbon Fibers. J. Compos. Sci., 5.10.3390/jcs5040111 ↗
27. Huang, Z., Deng, Z., Dong, C., Fan, J., and Ren, Y. (2022). A closed-loop recycling process for carbon fiber reinforced vinyl ester resin composite. Chem. Eng. J., 446.10.1016/j.cej.2022.137254 ↗
28. Control of multi-scale cracking for improvement of the reliability of carbon/carbon composites via design of interlaminar stress10.1016/j.compstruct.2022.115985 ↗
29. Electrostatic incitation on fiber surface for enhancing mechanical properties of fiber-reinforced composite10.1016/j.compscitech.2022.109627 ↗
30. Preparation of a C/C–Cu composite with Mo2C coatings as a modification interlayer10.1016/j.matlet.2015.01.111 ↗
31. Novel copper-impregnated carbon strip for sliding contact materials10.1016/j.jallcom.2017.11.311 ↗
32. High strength and high conductivity Cu alloys: A review10.1007/s11431-020-1633-8 ↗
33. Multifunctional application of carbon fiber reinforced polymer composites: Electrical properties of the reinforcing carbon fibers—A short review10.1016/j.compositesb.2018.10.098 ↗
34. Properties of Glass-Fiber Hybrid Composites: A Review10.1080/03602559.2016.1233271 ↗
35. Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes10.1016/j.resconrec.2020.105340 ↗
36. Zheng, Y., Chen, L., Wang, X., and Wu, G. (2019). Modification of Renewable Cardanol onto Carbon Fiber for the Improved Interfacial Properties of Advanced Polymer Composites. Polymers, 12.10.3390/polym12010045 ↗
37. Copper fiber reinforced needle-coke/carbon composite for pantograph slide and its current-carrying wear performance10.1088/2053-1591/ac6ccd ↗
38. Additively manufactured carbon fiber-reinforced composites: State of the art and perspective