journal article·2022-12-02Open access

Effect of the Transverse Functional Gradient of the Thin Interfacial Inclusion Material on the Stress Distribution of the Bimaterial under Longitudinal Shear

Yosyf Piskozub, Liubov Piskozub, Heorhiy Sulym

Materials· Volume 15· Issue 23

Abstract

The effect of a functional gradient in the cross-section material (FGM) of a thin ribbon-like interfacial deformable inclusion on the stress–strain state of a piecewise homogeneous linear–elastic matrix under longitudinal shear conditions is considered. Based on the equations of elasticity theory, a mathematical model of such an FGM inclusion is constructed. An analytic–numerical analysis of the stress fields for some typical cases of the continuous functional gradient dependence of the mechanical properties of the inclusion material is performed. It is proposed to apply the constructed solutions to select the functional gradient properties of the inclusion material to optimize the stress–strain state in its vicinity under the given stresses. The derived equations are suitable with minor modifications for the description of micro-, meso- and nanoscale inclusions. Moreover, the conclusions and calculation results are easily transferable to similar problems of thermal conductivity and thermoelasticity with possible frictional heat dissipation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Material Mechanics · Structural mechanics and materials · Elasticity and Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Applied Mathematics, Faculty of Computer Science and Telecommunications, Cracow University of Technology, Warszawska Str. 24, 31-155 Cracow, Poland

Department of Applied Mathematics and Physics, Ukrainian Academy of Printing, Pidgolosko Str. 19, 79020 Lviv, Ukraine

Department of Mechanics and Applied Computer Science, Faculty of Mechanical Engineering, Bialystok University of Technology, Wiejska 45C, 15-351 Bialystok, Poland

Funding

National Science Centre · Minister of Education and Science of Poland

References (67)

Show source-provided references
1. Micromechanics of Defects in Solids10.1115/1.3167076 ↗
2. Wang, Y., and Huang, Z. (2018). Analytical Micromechanics Models for Elastoplastic Behavior of Long Fibrous Composites: A Critical Review and Comparative Study. Materials, 11.10.3390/ma11101919 ↗
3. Nano-mechanics or how to extend continuum mechanics to nanoscale
4. A review of recent works on inclusions10.1016/j.mechmat.2013.01.005 ↗
5. Mencik, J. (1996). Mechanics of Components with Treated or Coated Solids, Kluwer Academic Publishing.
6. Nemat-Nasser, S., and Hori, M. (1993). Micromechanics: Overall Properties of Heterogeneous Materials, Elsevier.
7. Interaction of Physicomechanical Fields in Bodies with Thin Structural Inhomogeneities: A Survey10.1007/s10958-021-05213-9 ↗
8. Determination of thermal stress intensity factors for an interface crack in a graded orthotropic coating-substrate structure10.1007/s10704-005-4728-7 ↗
9. Simplified Micromechanical Equations for Thermal Residual Stress Analysis of Coated Fiber Composites10.1520/CTR10096J ↗
10. Modeling and Computation of Heat Transfer in a System “Body-Multilayer Coating”10.1615/HeatTransRes.v37.i5.50 ↗
11. Three-dimensional analysis of a functionally graded coating/substrate system of finite thickness
12. Multiple cracking in functionally graded ceramic/metal coatings10.1016/0020-7683(94)00267-Z ↗
13. Microstructure-based damage and fracture modelling of alumina coatings10.1016/j.commatsci.2004.09.001 ↗
14. Thin interphase/imperfect interface in elasticity with application to coated fiber composites10.1016/S0022-5096(02)00050-9 ↗
15. Semi-analytical solution of three-dimensional thermoelastic problem for half-space with gradient coating10.1080/01495739.2018.1460227 ↗
16. Davim, P., and Constantinos, A. (2013). Nanocomposites. Materials, Manufacturing and Engineering, Charitidis, Walter de Gruyter GmbH.10.1515/9783110267426 ↗
17. The Effects of Surface Elasticity on an Elastic Solid with Mode-III Crack: Complete Solution10.1115/1.3177000 ↗
18. Properties of functionally graded materials, Manufactured by progressive lamination method for applications
19. Ichikawa, K. (2000). Functionally Graded Materials in the 21ST Century, A Workshop on Trends and Forecasts, Kluver Academic Publishers.10.1007/978-1-4615-4373-2 ↗
20. Miyamoto, Y., Kaysser, W.A., Rabin, B.H., Kawasaki, A., and Ford, R.G. (1999). Functionally Graded Materials: Design, Processing and Applications, Springer.10.1007/978-1-4615-5301-4 ↗
21. Eshelby formalism for nano-inhomogeneities
22. Thermal stresses in a coating–substrate assembly caused by internal heat source10.1080/01495739.2015.1123594 ↗
23. Functionally Graded Materials: An Overview of Stability, Buckling, and Free Vibration Analysis10.1155/2019/1354150 ↗
24. A Review on Functionally Graded Materials and Structures via Additive Manufacturing: From Multi-Scale Design to Versatile Functional Properties10.1002/admt.201900981 ↗
25. A functionally gradient material produced by a powder metallurgical process10.1007/BF00277083 ↗
26. Processing techniques for functionally graded materials10.1016/S0921-5093(03)00578-1 ↗
27. High strength alumina substrates produced by a multiple-layer casting technique
28. Nonlinear Deformation of a Thin Interface Inclusion10.1007/s11003-018-0114-2 ↗
29. Antiplane Deformation of a Bimaterial with Thin Interfacial Nonlinear Elastic Inclusion
30. The determination of the elastic field of an ellipsoidal inclusion, and related problems
31. Size-Dependent Eshelby’s Tensor for Embedded Nano-Inclusions Incorporating Surface/Interface Energies10.1115/1.1781177 ↗
32. An interface model of a graded three-dimensional anisotropic curved interphase
33. Imperfect soft and stiff interfaces in two-dimensional elasticity10.1016/S0167-6636(01)00055-2 ↗
34. Martynyak, R.M., and Serednytska, K.I. (2017). Contact Problems of Thermoelasticity for Interface Cracks in Bimaterials, Rastr-7.
35. A continuum theory of elastic material surfaces10.1007/BF00261375 ↗
36. Elastic surface—Substrate interactions10.1098/rspa.1999.0320 ↗
37. Sulym, H.T. (2007). Bases of Mathematical Theory of Thermo-elastic Equilibrium of Solids Containing Thin Inclusions, Research and Publishing Center of NTSh. (In Ukrainian).
38. Hutsaylyuk, V., Piskozub, Y., Piskozub, L., and Sulym, H. (2022). Deformation and Strength Parameters of a Composite Structure with a Thin Multilayer Ribbon-like Inclusion. Materials, 15.10.3390/ma15041435 ↗
39. Effect of surface stresses on the tensely deformed state of thin interface microinclusion10.23939/mmc2021.01.069 ↗
40. Thermoelastic equilibrium of piecewise homogeneous solids with thin inclusions10.1007/s10665-008-9225-3 ↗
41. Piskozub, Y., and Sulym, H. (2021). Effect of Frictional Slipping on the Strength of Ribbon-Reinforced Composite. Materials, 14.10.3390/ma14174928 ↗
42. Stress concentration near a cavity filled with a liquid10.1007/BF00723078 ↗
43. Interface cracking of FGM coatings under steady-state heat flow10.1016/S0013-7944(97)00137-9 ↗
44. Friction contact of two elastic half-planes with local recesses in boundary
45. Asymptotics of stresses in the vicinity of a thin elastic interphase inclusion10.1007/BF02538967 ↗
46. Antiplane Deformation of a Bimaterial Containing an Interfacial Crack with the Account of Friction I. Single Loading
47. Antiplane Deformation of a Bimaterial Containing an Interfacial Crack with the Account of Friction 2. Repeating and Cyclic Loading
48. Longitudinal shear of a bi-material with fractional sliding contact in the interfacial crack10.15632/jtam-pl.54.2.529 ↗
49. Transient temperature processes in composite strip and homogeneous foundation10.1016/j.icheatmasstransfer.2007.05.004 ↗
50. 2D boundary element analysis of defective thermoelectroelastic bimaterial with thermally imperfect but mechanically and electrically perfect interface10.1016/j.enganabound.2015.07.012 ↗
51. Model tonkogo vklyucheniya v usloviyah yego idealnogo i neidealnogo kontaktnogo vzaimodeystviya s okruzhayuschim materialom
52. Thermal stress analysis of multi-layer thin films and coatings by an advanced boundary element method
53. Rodríguez, A., Calleja, A., de Lacalle, L.N.L., Pereira, O., González, H., Urbikain, G., and Laye, J. (2019). Burnishing of FSW Aluminum Al–Cu–Li Components. Metals, 9.10.3390/met9020260 ↗
54. Joining metrics enhancement when combining FSW and ball-burnishing in a 2050 aluminum alloy10.1016/j.surfcoat.2019.04.010 ↗
55. Homogenization of elasto-plastic functionally graded material based on representative volume element: Application to incremental forming process10.1016/j.ijmecsci.2019.07.005 ↗
56. Study of multiply-layered cylinders made of functionally graded materials using the transfer matrix method10.2140/jomms.2011.6.641 ↗
57. An asymptotic solution of temperature field in a strip of a functionally graded material10.1016/S0735-1933(02)00409-8 ↗
58. Majak, J., Mikola, M., Pohlak, M., Eerme, M., and Karunanidhi, R. (2021, January 27–29). Modelling FGM materials. An accurate function approxi-mation algorithms. Proceedings of the Modern Materials and Manufacturing (MMM 2021), Tallinn, Estonia. IOP Conference Series: Materials Science and Engineering.10.1088/1757-899X/1140/1/012013 ↗
59. Takahashi, M., Itoh, Y., and Kashiwaya, H. (1990, January 8–9). Fabrication and evaluation of W/Cu gradient material by sintering and infiltration technique. Proceedings of the First International Symposium on Functionally Gradient Materials FGM, Tokyo, Japan. Functionally Gradient Materials Forum, The Society of Non-Traditional Technology.
60. Stress intensity factors for an interface crack between a functionally graded coating and a homogeneous substrate10.1023/B:FRAC.0000007373.29142.57 ↗
61. Crack problem in FGM layers under thermal stresses10.1080/01495739608946172 ↗
62. Fracture mechanics analysis model for functionally graded materials with arbitrarily dis-tributed properties10.1023/A:1020137923576 ↗
63. Three dimensional fracture analysis of FGM coatings under thermomechanical loading10.1007/s10704-005-2527-9 ↗
64. Thermal Stress Intensity Factors for a Normal Surface Crack in a Functionally Graded Coating Structure10.1080/01495730701738348 ↗
65. Conditions of contact interaction (a survey)
66. Thermal stress intensity factors for an interface crack in a functionally graded layered structures10.1007/s00419-010-0433-8 ↗
67. On Analogy between Longitudinal Shear and Stationary Thermal Conductivity of Bodies with Inclusions and Cracks