Optimization of Processing Parameter and Mechanical Response Analysis of Advanced Heterogeneous Laminated Composites Using Ni/Al Foils by In Situ Reaction Synthesis
Source abstract
Abstract
The advanced heterogeneous laminated composites were successfully fabricated by vacuum hot pressing using Ni and Al foils by in situ solid-state reaction synthesis. The effects of holding time and temperature on the microstructure and phase distribution were analyzed using scanning electron microscopy. Based on the optimized processing parameters, the microstructure and phase transformation, and the relationship between the microstructure and the corresponding mechanical properties were discussed in detail. To clarify the mechanical response of the laminated structure, the deformation microstructure and fracture characteristics were studied by scanning electron microscopy and electron backscatter diffraction. The results indicated that the evolution of the interfacial phases in the laminated composite occurred via the sequence: NiAl3, Ni2Al3, NiAl, and Ni3Al. An interface between the Ni and Ni3Al layers without cracks and voids formed due to the uniform pressure applied during hot pressing. The laminated composites hot pressed under 620 °C/5 MPa/1 h + 1150 °C/10 MPa/2 h exhibited the best ultimate tensile strength of 965 MPa and an elongation of 22.6% at room temperature. Extending the holding time during the second stage of the reaction synthesis decreased the thickness of the Ni3Al layer. This decreased the tensile strength of the laminated composite at 1000 °C but improved the tensile strength at room temperature. Moreover, the layer–thickness relationship of the laminated structure and the matching pattern were important factors affecting the strength and elongation of the laminated composites. The reinforcement form of the materials was not limited to a lamellar structure but could be combined with different forms of reinforcement to achieve continuous reinforcement over a wide range of temperatures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys · Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Precision Forming for High Performance, Dalian University of Technology, Dalian 116024, China
National Key Lab for Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin 150001, China
Funding
National Natural Science Foundation of China · China Postdoctoral Science Foundation
References (31)
Show source-provided references
1. Structure and mechanical properties of NiAl and Ni3Al-based alloys10.1016/S0020-7403(99)00087-9 ↗
2. Synthetic multifunctional metallic-intermetallic laminate composites10.1007/s11837-005-0229-4 ↗
3. Microstructure evolution in pure Ni and Invar-based metallic-intermetallic laminate (MIL) composites10.1016/j.msea.2016.11.033 ↗
4. Processing, microstructure and properties of laminated Ni-intermetallic composites synthesized using Ni sheets and Al foils10.2478/v10172-011-0076-y ↗
5. Formation of sheet metal-intermetallic composites by self-propagating high-temperature reactions10.1007/BF00624495 ↗
6. Processing, structure and properties of metal-intermetallic composites10.1016/0921-5093(94)03300-5 ↗
7. Reaction synthesis and microstructures of NiAl/Ni micro-laminated composites10.1016/j.msea.2005.01.044 ↗
8. Combustion Synthesis Reactions in Cold-Roll ed Ni/Al and Ti/Al Multilayers10.1007/s11661-009-9840-2 ↗
9. Intermixing criteria for reaction synthesis of Ni/Al multilayered microfoils10.1016/j.scriptamat.2005.12.032 ↗
10. Experimental evidence of two-stage formation of Al3Ni in reactive Ni/Al multilayer foils10.1016/j.scriptamat.2007.02.032 ↗
11. Effect of cold rolling and subsequent annealing on hot pressed Ni/Al laminates10.1023/A:1017930523931 ↗
12. Impact of crystallography at Ni/NiAl interfaces on the nucleation of Ni3Al10.1016/j.actamat.2021.116713 ↗
13. Effects of heat treatment on the microstructure and mechanical properties of Ni3Al-based superalloys: A review10.1007/s12613-020-2177-y ↗
14. Influences of laser remelt-ing treatments on microstructure and tensile properties of multiphase Ni3Al-based in-termetallic alloy10.1016/j.msea.2022.144087 ↗
15. Effect of sintering pressure and temperature on structure and properties of Ni single bond Al metal-intermetallic composites produced by SPS10.1016/j.matchar.2021.111415 ↗
16. Microstructural characterisation and mechanical response of laminated Ni-intermetallic composites synthesised using Ni sheets and Al foils10.1016/j.matchar.2012.05.007 ↗
17. Properties of Ni-aluminides-reinforced Ni-matrix laminates synthesized by pulsed-current hot pressing (PCHP)10.1016/j.msea.2006.04.113 ↗
18. Tensile and fracture properties of NiAl/Ni micro-laminated composites prepared by reaction synthesis10.1557/jmr.2006.0154 ↗
19. Effects of Ni foil thickness on the microstructure and tensile properties of reaction synthesized multilayer composites10.1016/j.msea.2006.09.082 ↗
20. The microstructure and mechanical properties of reaction synthesized Ni-Al intermetallic sheets by pure Ni/Al foils with different thickness ratios10.1016/j.jallcom.2022.163750 ↗
21. Phase transformations in nickel rich NiAl using electrical resistivity measurements10.1016/S1359-6462(97)00180-2 ↗
22. A novel process for integrated forming and reaction synthesis of NiAl alloy curved shells10.1016/j.jmatprotec.2020.116798 ↗
23. Heat treatment behavior and strengthening mechanisms of CNT/6061Al composites fabricated by flake powder metallurgy10.1016/j.matchar.2019.05.017 ↗
24. Maximizing necking-delayed fracture of sandwich-structured Ni/Cu/Ni composites10.1016/j.scriptamat.2017.02.032 ↗
25. Geometrically necessary dislocations and straingradient plasticity: A few critical issues10.1016/S1359-6462(02)00335-4 ↗
26. Fabrication of laminated metal–intermetallic composites by interlayer in-situ reaction10.1023/A:1004624012683 ↗
27. Reaction mechanism of combustion synthesis of NiAl10.1016/S0921-5093(01)01549-0 ↗
28. Reactive processing of nickel-aluminide intermetallic compounds10.1023/A:1025956906085 ↗
29. A novel method for fabricating NiAl alloy sheet components using laminated Ni/Al foils10.1016/j.msea.2019.03.069 ↗
30. Designing laminated metal composites for tensile ductility10.1016/j.matdes.2014.08.061 ↗
31. Effect of layer sequence on the mechanical properties of Ti/TiAl laminates10.1016/j.matdes.2018.02.003 ↗