journal article·2023-01-10Open access

Mechanical and Thermal Properties of W-Ta-B Coatings Deposited by High-Power Impulse Magnetron Sputtering (HiPIMS)

Rafał Psiuk, Tomasz Mościcki, Justyna Chrzanowska-Giżyńska, Łukasz Kurpaska, Joanna Radziejewska, Piotr Denis, Dariusz Garbiec, Marcin Chmielewski

Materials· Volume 16· Issue 2

Abstract

We present the deposition and characterization of tungsten-tantalum diboride (W,Ta)B2 coatings prepared by the high-power impulse magnetron sputtering technique. We evaluated the influence of pulse duration and substrate bias on the properties of (W,Ta)B2 films. A high hardness of up to 35 GPa measured by nanoindentation was simultaneously obtained with good elastic properties. Changing the pulse duration greatly affected the B/(W+Ta) atomic ratio, which influenced the properties of the coatings. The deposited films are thermally stable at up to 1000 °C in vacuum and are able to withstand oxidation at 500 °C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Fundamental Technological Research, Polish Academy of Sciences, Pawinskiego 5B, 02-106 Warsaw, Poland

NOMATEN Centre of Excellence, National Centre for Nuclear Research, ul. A. Soltana 7, 05-400 Otwock, Poland

Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, Narbutta 85, 02-524 Warsaw, Poland

Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755 Poznan, Poland

Łukasiewicz Research Network – Institute of Microelectronics and Photonics, Centre of Functional Materials, 133 Wolczynska St., 01-919 Warsaw, Poland

Funding

National Centre for Research and Development (NCBR, Poland)

References (24)

Show source-provided references
1. Preparations and Some Properties of W2B, δ-WB and WB2 Crystals from High-Temperature Metal Solutions10.1143/JJAP.34.226 ↗
2. Tungsten tetraboride, an inexpensive superhard material10.1073/pnas.1102636108 ↗
3. Design of pulsed neon injection in the synthesis of W-B-C films using magnetron sputtering from a surface-sintered single powder cathode10.1016/j.tsf.2020.138426 ↗
4. Superhard Tungsten Diboride-Based Solid Solutions10.1021/acs.inorgchem.8b02620 ↗
5. Influence of Tantalum on phase stability and mechanical properties of WB210.1557/mrc.2019.5 ↗
6. Influence of overstoichiometric boron and titanium addition on the properties of RF magnetron sputtered tungsten borides10.1016/j.surfcoat.2020.125689 ↗
7. Thermal and mechanical properties of (W,Zr)B2-z coatings deposited by RF magnetron sputtering method10.1016/j.ijrmhm.2022.105811 ↗
8. Novel strategy for low-temperature, high-rate growth of dense, hard, and stress-free refractory ceramic thin films10.1116/1.4884575 ↗
9. Mościcki, T., Psiuk, J.R.R., Wiśniewska, M., and Garbiec, D. (2021). Properties of Spark Plasma Sintered Compacts and Magnetron Sputtered Coatings Made from Cr, Mo, Re and Zr Alloyed Tungsten Diboride. Coatings, 11.10.3390/coatings11111378 ↗
10. Universal hardness and elastic recovery in Vickers nanoindentation of copper and silicate glasses
11. Flexible hard nanocomposite coatings10.1039/C5RA09586G ↗
12. Kuo, C.-C., Lin, C.-H., Chang, J.-T., and Lin, Y.-T. (2020). Effect of Voltage Pulse Width and Synchronized Substrate Bias in High-Power Impulse Magnetron Sputtering of Zirconium Films. Coatings, 11.10.3390/coatings11010007 ↗
13. Effect of bias voltage on the growth of super-hard (AlCrTiVZr)N high-entropy alloy nitride films synthesized by high power impulse magnetron sputtering10.1016/j.apsusc.2021.150417 ↗
14. Effect of substrate bias voltage on defect generation and their influence on corrosion and tribological properties of HIPIMS deposited CrN/NbN coatings10.1016/j.surfcoat.2018.03.009 ↗
15. Mechanical properties and thermal stability of tungsten boride films deposited by radio frequency magnetron sputtering10.1016/j.ceramint.2018.07.208 ↗
16. Substoichiometry and tantalum dependent thermal stability of α-structured W-Ta-B thin films10.1016/j.scriptamat.2018.06.005 ↗
17. Improved mechanical properties of W-Zr-B coatings deposited by hybrid RF Magnetron—PLD method10.1016/j.apsusc.2021.151239 ↗
18. Controlling the B/Ti ratio of TiBx thin films grown by high-power impulse magnetron sputtering10.1116/1.5026445 ↗
19. Expansion of laser-ablated two-component plume with disparate masses
20. Anisotropic super-hardness of hexagonal WB2±z thin films10.1080/21663831.2021.2021308 ↗
21. Vacancy Hardening and Softening in Transition Metal Carbides and Nitrides10.1103/PhysRevLett.86.3348 ↗
22. Structure evolution and mechanical properties of hard tantalum diboride films10.1116/6.0000155 ↗
23. Consideration of Lubricants for Temperatures above 1000 F
24. Influence of Ta on the oxidation resistance of WB2−z coatings10.1016/j.jallcom.2020.158121 ↗