Sapropel as a Binding Material for Wood Processing Waste in the Development of Thermal Insulation Biocomposite
Source abstract
Abstract
When developing new innovative building materials, their performance characteristics as well as their environmental friendliness are important. It is difficult to produce a fully ecological material for building envelopes, because there is a lack of ecological binding materials on the market, good binding materials are very expensive, and cheaper ones have poorer adhesive properties and performance characteristics. In this work, natural organic sapropel was used as an ecological binder. Before use, an organic sapropel was additionally mechanically activated. Its activation efficiency was evaluated on the basis of consistency and tensile strength. Sapropel activation increased its consistency from 112 to 168 mm and its tensile strength from 466 to 958 kPa. Wood processing waste was used as a filler for the thermal insulation biocomposite. Additionally, the wood waste was chopped to regulate the density and main performance properties of the biocomposite. The density of the biocomposite was also regulated using different amounts of sapropel and the degree of compaction of the composite mixture. In this work, the influence of the amount of sapropel, the level of compression of the biocomposite mixture, and the size of the wood waste particles on the thermal conductivity and compressive stress of the biocomposite was analyzed. It was found that the compression level had the greatest influence on both the compressive stress and thermal conductivity, up to 12 times and 43.3%, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Building Materials Institute, Faculty of Civil Engineering, Vilnius Gediminas Technical University, Linkmenų Str. 28, LT-08217 Vilnius, Lithuania
T. Basenov Institute of Architecture and Civil Engineering, Satbayev University, 22 Satbayev St., Almaty 050043, Kazakhstan
References (34)
Show source-provided references
1. Development and characterization of adhesives from soy protein for bonding wood10.1016/j.ijadhadh.2005.12.004 ↗
2. Residential building materials: An important source of ambient formaldehyde in mainland China10.1016/j.envint.2021.106909 ↗
3. Occupational exposure to formaldehyde and risk of lung cancer: A systematic review and meta-analysis10.1002/ajim.23093 ↗
4. Reproductive and developmental toxicity of formaldehyde: A systematic review10.1016/j.mrrev.2011.07.003 ↗
5. The exposure to formaldehyde in industries and health care centers: A systematic review and probabilistic health risk assessment10.1016/j.envres.2021.112094 ↗
6. Chemicals of concern in building materials: A high-throughput screening10.1016/j.jhazmat.2021.127574 ↗
7. Environmental impact of cement production and Solutions: A review10.1016/j.matpr.2021.02.212 ↗
8. Environmental impact assessment of post-combustion CO2 capture technologies applied to cement production plants10.1016/j.jenvman.2022.115908 ↗
9. Reference forecasts for CO2 emissions from fossil-fuel combustion and cement production in Portugal10.1016/j.enpol.2020.111642 ↗
10. Biowaste biorefinery in Europe: Opportunities and research & development needs10.1016/j.nbt.2013.11.003 ↗
11. High-strength, self-initiated, wide pH range of underwater adhesive suitable for different severe environments10.1016/j.cej.2022.140640 ↗
12. Biomimetic Swallow Nest Structure: A Lightweight and High-Strength Thermal Insulation Material10.1021/acsnano.2c01451 ↗
13. Activated wood surface and functionalized cellulose co-building strong chemical wood bonding performance10.1016/j.carbpol.2023.120573 ↗
14. Ecological, thermal and acoustical insulating composite from hemp shives and sapropel binder10.1016/j.indcrop.2016.06.034 ↗
15. Obuka, V., Šinka, M., Kļaviņš, M., Stankeviča, K., and Korjakins, A. (October, January 30). Sapropel as a Binder: Properties and Application Possibilities for Composite Materials. Proceedings of the 2nd International Conference on Innovative Materials, Structures and Technologies, Riga, Latvia.
16. Lightweight Composite Building Materials with Hemp (Cannabis sativa L.)
17. Freshwater sapropel (gyttja): Its description, properties and opportunities of use in contemporary agriculture
18. Daugvilienė, D., and Inovatyvios technologijos sapropeliui perdirbti į trąšas ar dirvožemio gerinimo medžiagą sukūrimas ir šios technologijos praktinis pritaikymas (2022, September 18). Ataskaita. Available online: https://zum.lrv.lt/uploads/zum/documents/files/LT_versija/Veiklos_sritys/Mokslas_mokymas_ir_konsultavimas/Moksliniu_tyrimu_ir_taikomosios_veiklos_darbu_galutines_ataskaitos/Sapropelis.pdf.
19. Obuka, V. (2021). Sapropel for the Development of Biocomposite Materials: Properties and Application Possibilities. [Doctoral Thesis, University of Latvia].
20. Kozlovska, J. (2012). Research of Sapropel Use for Heat Production and Environmental Assessment. Summary of Doctoral Dissertation, Technika.
21. Steponavičius, P., Svitojus, A., Bakšienė, E., and Daugvilienė, D. (2012). Organic Fertilizers Based on Sapropel and Their Production Method. (WO2012/055379A1).
22. Ežerų valymo produkto—Sapropelio panaudojimo galimybių tyrimai
23. Biogeochemistry and element speciation in sapropel from freshwater Lake Dukhovoe (East Baikal region, Russia)10.1016/j.apgeochem.2022.105384 ↗
24. Catalytic hydroprocessing of organic matter of sapropels. The effects of sapropel nature on the yield and composition of products10.1016/j.cattod.2021.02.011 ↗
25. Microbiological Stability of Bio-Based Building Materials10.12911/22998993/134033 ↗
26. Balčiūnas, G. (2015). Investigation of Building Composites with Fibre Hemp Shives. [Doctoral Dissertation, Technika].
27. (2000). Standard No. EN ISO 12570.
28. (2003). Standard No. EN 13820.
29. (2013). Standard No. EN 1607.
30. (2001). Standard No. EN 12667.
31. (2013). Standard No. EN 826.
32. Fricke, J. (2001, January 22–24). Physical Aspects of Heat Transfer and the Development of Thermal Insulations. Proceedings of the International Conference and Workshop, EMPA, Duebendorf, Switzerland.
33. Augaitis, N., Vaitkus, S., Członka, S., and Kairytė, A. (2020). Research of Wood Waste as a Potential Filler for Loose-Fill Building Insulation: Appropriate Selection and Incorporation into Polyurethane Biocomposite Foams. Materials, 13.10.3390/ma13235336 ↗
34. Hemp Shive-Based Bio-Composites Bounded by Potato Starch Binder: The Roles of Aggregate Particle Size and Aspect Ratio10.12911/22998993/144637 ↗