journal article·2023-04-17Open access

Multiscale Analysis of Functional Surfaces Produced by L-PBF Additive Technology and Titanium Powder Ti6Al4V

Damian Gogolewski, Paweł Zmarzły, Tomasz Kozior

Materials· Volume 16· Issue 8

Abstract

The article discusses experimental studies assessing the possibility of mapping surfaces with a characteristic distribution of irregularities. Tests involved surfaces produced using the L-PBF additive technology, using titanium-powder-based material (Ti6Al4V). An evaluation of the resulting surface texture was extended to cover the application of a modern, multiscale analysis, i.e., wavelet transformation. The conducted analysis that involved using selected mother wavelet enabled production process errors and involved determining the size of resulting surface irregularities. The tests provide guidelines and enable a better understanding of the possibility of producing fully functional elements on surfaces, where morphological surface features are distributed in a characteristic way. Conducted statistical studies showed the advantages and disadvantages of the applied solution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Surface Roughness and Optical Measurements · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland

Funding

National Science Centre

References (39)

Show source-provided references
1. Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys10.1007/s43452-021-00246-y ↗
2. Use of selective laser melting (SLM) as a replacement for pressure die casting technology for the production of automotive casting
3. Analysis of 3D printing parameters of gears for hybrid manufacturing10.1063/1.5034997 ↗
4. Diaz, A. (2019). Additive Manufacturing for the Aerospace Industry, Elsevier.
5. A comparative life cycle assessment of a selective-laser-melting-produced hydraulic valve body using design for Property10.1016/j.procir.2020.01.095 ↗
6. Edelmann, A., Dubis, M., and Hellmann, R. (2020). Selective laser melting of patient individualized osteosynthesis plates—Digital to physical process chain. Materials, 13.10.3390/ma13245786 ↗
7. Gogolewski, D., Kozior, T., Zmarzły, P., and Mathia, T.G. (2021). Morphology of Models Manufactured by SLM Technology and the Ti6Al4V Titanium Alloy Designed for Medical Applications. Materials, 14.10.3390/ma14216249 ↗
8. Surface texture measurement for additive manufacturing10.1088/2051-672X/3/2/024002 ↗
9. In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy10.1016/j.ijfatigue.2021.106616 ↗
10. A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V alloy10.1016/j.ijfatigue.2020.105584 ↗
11. Understanding the role of surface textures in improving the performance of boundary additives, part I: Experimental10.1016/j.triboint.2020.106243 ↗
12. Zmarzły, P. (2020). Multi-dimensional mathematical wear models of vibration generated by rolling ball bearings made of aisi 52100 bearing steel. Materials, 13.10.3390/ma13235440 ↗
13. Gogolewski, D. (2023). Multiscale assessment of additively manufactured free-form surfaces. Metrol. Meas. Syst., 30.10.2139/ssrn.4206843 ↗
14. Towards a new definition of areal surface texture parameters on freeform surface: Re-entrant features and functional parameters10.1016/j.measurement.2019.04.027 ↗
15. Podulka, P. (2022). Thresholding Methods for Reduction in Data Processing Errors in the Laser-Textured Surface Topography Measurements. Materials, 15.10.3390/ma15155137 ↗
16. Surface texture metrology for metal additive manufacturing: A review10.1016/j.precisioneng.2016.06.001 ↗
17. Gogolewski, D., Zmarzły, P., Kozior, T., and Mathia, T.G. (2023). Possibilities of a Hybrid Method for a Time-Scale-Frequency Analysis in the Aspect of Identifying Surface Topography Irregularities. Materials, 16.10.3390/ma16031228 ↗
18. A Novel Hybrid Transform approach with integration of Fast Fourier, Discrete Wavelet and Discrete Shearlet Transforms for prediction of surface roughness on machined surfaces10.1016/j.measurement.2020.108011 ↗
19. Multiscale analyses and characterizations of surface topographies10.1016/j.cirp.2018.06.001 ↗
20. Evolution of rough-surface geometry and crystalline structures of aligned TiO2 nanotubes for photoelectrochemical water splitting10.1038/s41598-018-29247-3 ↗
21. Bartkowiak, T., and Brown, C.A. (2019). Multiscale 3D curvature analysis of processed surface textures of aluminum alloy 6061 T6. Materials, 12.10.3390/ma12020257 ↗
22. A comparison of multiscale surface curvature characterization methods for tribological surfaces10.2474/trol.14.8 ↗
23. Calculation method for fractal characteristics of machining topography surface based on wavelet transform10.1016/j.procir.2019.02.109 ↗
24. An improved signal determination method on machined surface topography10.1016/j.precisioneng.2017.09.004 ↗
25. Fractional spline wavelets within the surface texture analysis10.1016/j.measurement.2021.109435 ↗
26. Study of surface topography in Abrasive Water Jet machining of carbon foam and morphological characterization using Discrete Wavelet Transform10.1016/j.jmatprotec.2019.05.030 ↗
27. Freeform surface filtering using the lifting wavelet transform10.1016/j.precisioneng.2012.08.002 ↗
28. Automated surface texture analysis via Discrete Cosine Transform and Discrete Wavelet Transform10.1016/j.precisioneng.2022.05.006 ↗
29. Influence of the edge effect on the wavelet analysis process10.1016/j.measurement.2019.107314 ↗
30. Navarro, P.J., Fernández-Isla, C., Alcover, P.M., and Suardíaz, J. (2016). Defect detection in textures through the use of entropy as a means for automatically selecting the wavelet decomposition level. Sensors, 16.10.3390/s16081178 ↗
31. Wavelet analysis for surface characterisation: An experimental assessment10.1016/S0007-8506(07)60744-6 ↗
32. An assessment of applicability of the two-dimensionalwavelet transform to assess the minimum chip thickness determination accuracy10.24425/mms.2020.134845 ↗
33. Progressive tool flank wear monitoring by applying discrete wavelet transform on turned surface images10.1016/j.measurement.2015.09.028 ↗
34. Prediction of surface roughness of various machining processes by a hybrid algorithm including time series analysis, wavelet transform and multi view embedding10.1016/j.measurement.2021.109904 ↗
35. An extended bi-dimensional empirical wavelet transform based filtering approach for engineering surface separation using high definition metrology10.1016/j.measurement.2021.109259 ↗
36. Surface roughness evaluation of electrical discharge machined surfaces using wavelet transform of speckle line images
37. (2023, March 28). Ti64 M290 Material Data Sheet. Available online: https://3dformtech.fi/wp-content/uploads/2019/11/Ti-Ti64_9011-0014_9011-0039_M290_Material_data_sheet_11-17_en-1.pdf.
38. Industrial survey of ISO surface texture parameters10.1016/j.cirpj.2017.06.001 ↗
39. Leach, R., Thompson, A., Senin, N., and Maskery, I. (2017, January 14–17). A metrology horror story: The additive surface. Proceedings of the ASPEN/ASPE Spring Topical Meeting on Manufacture and Metrology of Structured and Freeform Surfaces for Functional Applications, Hong Kong, China.10.1051/ijmqe/2017015 ↗