journal article·2023-06-09Open access

Investigations on Oxidation Behavior of Free-Standing CoNiCrAlYHf Coating with Different Surface Roughness at 1050 °C

Nadimullah Hakimi, Peng Song, Tabasum Huma, Dadallah Hanifi, Danish Bakhshyar, Wahab Abdul Ghafar, Taihong Huang

Materials· Volume 16· Issue 12

Abstract

MCrAlYHf bond coats are employed in jet and aircraft engines, stationary gas turbines, and power plants, which require strong resistance to oxidation at high temperatures. This study investigated the oxidation behavior of a free-standing CoNiCrAlYHf coating with varying surface roughness. The surface roughness was analyzed using a contact profilometer and SEM. Oxidation tests were conducted in an air furnace at 1050 °C to examine the oxidation kinetics. X-ray diffraction, focused ion beam, scanning electron microscopy, and scanning transmission electron microscopy were employed to characterize the surface oxides. The results show that the sample with Ra = 0.130 µm demonstrates better oxidation resistance compared to Ra = 7.572 µm and other surfaces with higher roughness in this study. Reducing surface roughness led to a decrease in the thickness of oxide scales, while the smoothest surface exhibited increased growth of internal HfO2. The β-phase on the surface with Ra = 130 µm demonstrated faster growth of Al2O3 compared to the γ-phase. An empirical model was suggested to explain the impact of surface roughness on oxidation behavior based on the correlation between the surface roughness level and oxidation rates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China

Faculty of Civil Aviation and Aeronautics, Kunming University of Science and Technology, Kunming 650093, China

Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming 650093, China

Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology, Kunming 650500, China

Yunnan Engineering Research Center of Metallic Powder Materials, Kunming 650093, China

Funding

National Natural Science Foundation of China · Natural Science Foundation of Yunnan

References (35)

Show source-provided references
1. Young, D.J. (2008). High Temperature Oxidation and Corrosion of Metals, Elsevier.
2. Birks, N., Meier, G.H., and Pettit, F.S. (2006). Introduction to the High Temperature Oxidation of Metals, Cambridge University Press.10.1017/CBO9781139163903 ↗
3. Oxidation of Ni-Cr-Al alloys between 1000° and 1200 °C10.1149/1.2407837 ↗
4. Effect of surface roughness on the oxidation behavior of the Ni-base superalloy ME310.1007/s11665-010-9605-5 ↗
5. High-temperature oxidation behavior of a novel Co-base superalloy10.1007/s11661-018-4736-7 ↗
6. Nowak, W.J., Siemek, K., Ochał, K., Kościelniak, B., and Wierzba, B. (2020). Consequences of different mechanical surface preparation of Ni-base alloys during high temperature oxidation. Materials, 13.10.3390/ma13163529 ↗
7. On the preferential grain boundary oxidation of a Ni-Co-based superalloy10.1016/j.corsci.2022.110203 ↗
8. Modelling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy René N5 at 980 °C10.1016/j.actamat.2009.11.004 ↗
9. High temperature oxidation behavior of Ni-based superalloy GH20210.1016/j.matchar.2016.05.013 ↗
10. The retention of thermal barrier coating systems on single-crystal superalloys: Effects of substrate composition10.1016/j.actamat.2008.03.046 ↗
11. Hot corrosion behavior of Ni based Inconel 617 and Inconel 738 superalloys10.1016/j.apsusc.2016.03.181 ↗
12. High-Temperature oxidation behavior of a Ni-Cr-W-Al alloy10.1016/S1005-0302(11)60152-7 ↗
13. Oxidation behavior and mechanism of a Ni-based single crystal superalloy with single α-Al2O3 film at 1000 °C10.1016/j.apsusc.2017.03.116 ↗
14. Effects of Ta and Y additions on the high temperature oxidation mechanisms of Ni–10Al alloy at 1100 °C10.1016/j.vacuum.2023.112074 ↗
15. Effects of Al and Ta on the high temperature oxidation of Ni-based superalloys10.1016/j.corsci.2014.10.025 ↗
16. Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications10.1016/j.actamat.2010.09.027 ↗
17. Effect of refractory elements and Al on the high temperature oxidation of Ni-base superalloys and modelling of their oxidation resistance10.1016/j.jallcom.2017.03.179 ↗
18. Effects of substrate roughness on the surface morphology and corrosion properties of Fe-and Ni-aluminide coatings on martensitic stainless steel10.1016/j.surfcoat.2020.125761 ↗
19. Effect of oxygen content in NiCoCrAlY bondcoat on the lifetimes of EB-PVD and APS thermal barrier coatings10.1016/j.surfcoat.2013.01.054 ↗
20. Investigation of surface roughness post-processing of additively manufactured nickel-based superalloy Hastelloy X using electropolishing10.1016/j.surfcoat.2022.128529 ↗
21. Two typical oxidation models on nickel-based superalloys under different initial surface roughness10.1016/j.corsci.2020.108942 ↗
22. Surface roughness affects metastable non-wetting behavior of silicate melts on thermal barrier coatings10.1007/s12598-021-01773-6 ↗
23. Influence of surface roughness on the oxidation behavior of a Ni-4.0 Cr-5.7 Al single crystal superalloy10.1016/j.apsusc.2018.01.226 ↗
24. Oxidation of single crystal PWA 1483 at 950 °C in flowing air10.1016/j.corsci.2008.06.033 ↗
25. Microstructural evolution of oxidation film on a single crystal nickel-based superalloy at 980 °C10.1007/s11085-017-9787-4 ↗
26. Effect of surface roughness on the oxidation behavior of a directionally solidified Ni-based superalloy at 1100 °C10.1007/s40195-015-0211-2 ↗
27. Surface recrystallization and its effect on oxidation of superalloy C26310.1016/j.corsci.2017.09.020 ↗
28. Effect of substrate roughness and film thickness on the magnetic properties of CoFeB films on polymer substrate10.1016/j.vacuum.2021.110399 ↗
29. Effect of surface treatment and crystal orientation on hot corrosion of a Ni-based single-crystal superalloy10.1016/j.corsci.2020.108472 ↗
30. The effect of surface machining on the high-temperature oxidation of a single crystal Ni-based superalloy10.2320/matertrans.M2014077 ↗
31. High-temperature oxidation behavior of GTD-111 Ni-based superalloy with an ultrafine-grained surface at 900 °C10.1016/j.corsci.2022.110935 ↗
32. The effect of oxide scale roughness on the plasticity of iron aluminide alloy10.1016/j.vacuum.2016.07.034 ↗
33. Effect of external pressure on β-NiAl phase transformation of Co-base alloy at 1323 K10.1088/2053-1591/ab5f9f ↗
34. The principle of le chatelier and braun10.1021/ed034p375 ↗
35. Effect of Al content on the high-temperature oxidation of Co-20Cr-(5, 10) Al oxide dispersion strengthened superalloys10.1016/j.corsci.2017.01.015 ↗