Numerical Study on the Seismic Performance of Cold-Formed Steel Shear Walls with Steel Sheathing and Gypsum Board
Source abstract
Abstract
The cold-formed steel shear wall with steel sheathing has gained increasing popularity due to its excellent shear capacity. To extend the applicability of this system to multi-story residences, aside from experimental investigations on the shear walls, it is essential to conduct a comprehensive study on the seismic performance of buildings. In this paper, numerical simulations were conducted on specimens subjected to monotonic and cyclic loading. Subsequently, seismic analysis of mid-rise building models was also carried out to investigate the influence of the proposed shear wall on building seismic performance. The research findings indicate that this study’s modeling method can effectively simulate the shear performance of the proposed shear wall under monotonic and cyclic loading. In addition, the proposed shear wall significantly enhances the structural stiffness and improves the seismic performance of the structure under seismic action.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Structural Engineering and Vibration Analysis · Seismic and Structural Analysis of Tall Buildings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Key Laboratory of Concrete and Pre-Stressed Concrete Structures of the Ministry of Education, Southeast University, Nanjing 211189, China
School of Civil Engineering, Southeast University, Nanjing 211189, China
Funding
National Natural Science Foundation of China · National Key Program Foundation of China · Graduate School of Southeast University
References (21)
Show source-provided references
1. Cold-formed steel structures around the world: A review of recent advances in applications, analysis and design10.1002/stco.201110019 ↗
2. Detailing recommendations for 1.83 m wide cold-formed steel shear walls with steel sheathing10.1016/j.jcsr.2010.07.009 ↗
3. Design of steel sheathed cold-formed steel framed shear walls10.1016/j.tws.2013.10.023 ↗
4. Steel sheathed/CFS framed shear walls under dynamic loading: Numerical modelling and calibration10.1016/j.tws.2013.05.007 ↗
5. Experimental investigation of seismic behaviour of low dissipative CFS strap-braced stud walls10.1016/j.jcsr.2016.07.027 ↗
6. A numerical study on seismic performance of strap-braced cold-formed steel shear walls10.1016/j.tws.2012.05.012 ↗
7. Seismic performance of high-strength lightweight foamed concrete-filled cold-formed steel shear walls10.1016/j.jcsr.2017.12.027 ↗
8. Seismic Performance of an Innovative Light-Frame Cold-Formed Steel Frame for Midrise Construction10.1061/(ASCE)ST.1943-541X.0000683 ↗
9. High-Fidelity Finite Element Modeling of Wood-Sheathed Cold-Formed Steel Shear Walls10.1061/(ASCE)ST.1943-541X.0002879 ↗
10. Shear resistance of cold-formed steel framed shear walls with 0.686 mm, 0.762 mm, and 0.838 mm steel sheet sheathing10.1016/j.engstruct.2010.01.029 ↗
11. Experimental work on single and double-sided steel sheathed cold-formed steel shear walls for seismic actions10.1016/j.tws.2015.02.007 ↗
12. Seismic performance of cold-formed steel framed shear walls with steel sheathing and gypsum board10.1016/j.tws.2019.106238 ↗
13. Ye, J.H., Feng, R.Q., and Chen, W. (2013). Seismic Technical Manual of Cold-Formed Steel Structures in Villages and Towns, Southeast University Press. (In Chinese).
14. (Abaqus, 2014). Abaqus, Version 6.14.
15. Seismic behavior of steel sheathed cold-formed steel shear wall: Experimental investigation and numerical modeling10.1016/j.tws.2015.08.024 ↗
16. OpenSees command language manual
17. (2012). Load Code for the Design of Building Structures (Standard No. GB 50009-2012).
18. Wang, X. (2017). Experimental and Simplified Calculation Method Research on the Lateral Performance of Mid-Rise Cold-Formed Steel Shear Walls Simulation of Shear and Compressive Performance of Cold-Formed Steel Wall. [Ph.D. Thesis, Southeast University].
19. (2000). Prestandard and Commentary for the Seismic Rehabilitation of Buildings (Standard No. FEMA 356).
20. (2012). Technical Specification for Low-Rise Cold-Formed Thin-Walled Steel Buildings (Standard No. JGJ 227-2011).
21. (2010). Code for Seismic Design of Buildings (Standard No. GB 50011-2010).