The Evolution of a Microstructure during Tempering and Its Influence on the Mechanical Properties of AerMet 100 Steel
Source abstract
Abstract
In order to provide guidance for furthering the balance of strength and toughness of AerMet 100 steel through tempering treatment, the effects of the tempering time on microstructure and mechanical properties are investigated. The microstructure evolution, especially M2C precipitates and austenite in AerMet 100 tempered at 482 °C for 1~20 h, was characterized, and its influences on the mechanical properties were studied. The tensile strength decreases gradually, the yield strength increases first and then decreases, and the fracture toughness KIC increases gradually with an increasing tempering time. The strength and toughness matching of AerMet 100 steel is achieved by tempering at 482 °C for 5~7 h. Without considering the martensitic size effect, the influence of the dislocation density on the tensile strength is more significant during tempering at 482 °C. The precipitation strengthening mechanism plays a dominant role in the yield strength when tempering for 5 h or less, and the combined influence of carbide coarsening and a sharp decrease in the dislocation density resulted in a significant decrease in tensile strength when tempering for 8 h or more. The fracture toughness KIC is primarily influenced by the reverted austenite, so that KIC increases gradually with the prolongation of the tempering time. However, a significant decrease in the dislocation density resulting from long-term tempering has a certain impact on KIC, giving rise to a decrease in the rising amplitude in KIC after tempering for 8 h or more.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150006, China
Chengdu Advanced Metal Materials Industrial Technology Institute Co., Ltd., Chengdu 610300, China
State Key Laboratory of Metal Material for Marine Equipment and Application, Anshan 114009, China
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
Center for Analysis, Measurement and Computing, Harbin Institute of Technology, Harbin 150001, China
References (27)
Show source-provided references
1. Implication of elastic coherency in secondary hardening of high Co-Ni martensitic steels10.1007/BF00544477 ↗
2. Composition of M2C phase in tempering of high Co-Ni steels10.1016/0956-716X(91)90115-H ↗
3. Study on the microstructure and mechanical properties of AerMet 100 steel at the tempering temperature around 482 °C10.1016/j.jallcom.2016.04.087 ↗
4. Microstructure and Mechanical Properties in Isothermal Tempering of High Co-Ni Secondary Hardening Ultrahigh Strength Steel10.1016/S1006-706X(08)60097-7 ↗
5. Microstructure analysis and yield strength simulation in high Co–Ni secondary hardening steel10.1016/j.msea.2016.05.069 ↗
6. Carbide precipitation and element distribution in high Co–Ni secondary hardening steel10.1007/s42243-018-0041-3 ↗
7. Structures of M2C carbides and its influence on strengthening in AerMet100 steel at the typical tempering temperature 482 °C10.1016/j.vacuum.2023.112209 ↗
8. Coarsening resistance of M2C carbides in secondary hardening steels: Part I. Theoretical model for multi-component coarsening kinetics10.1007/BF02650247 ↗
9. Strength and toughness of Fe-10ni alloys containing C, Cr, Mo, and Co10.1007/BF02649630 ↗
10. Microstructural basis for the effect of chromium on the strength and toughness of AF1410-based high performance steels10.1007/BF02652345 ↗
11. Influence of Heat Treatment on the Microstructure of a High Co-Ni Secondary Hardening Steel10.1016/j.matpr.2015.07.439 ↗
12. On the characteristics of M2C carbides in the peak hardening regime of AerMet 100 steel10.1007/s11661-998-0280-1 ↗
13. Transmission Electron Microscopy Examination of Hardening and Toughening Phenomena in Aermet 10010.1007/BF02666329 ↗
14. M2C precipitates in isothermal tempering of high Co-Ni secondary hardening steel10.1007/BF02595438 ↗
15. Isothermal M2C carbide growth in ultrahigh strength high Co-Ni steels10.1016/S1359-6462(97)00385-0 ↗
16. HRTEM study on precipitates in high Co-Ni steel
17. Analysis of fracture toughness in high Co–Ni secondary hardening steel using FEM10.1016/j.msea.2015.08.003 ↗
18. Microstructural Effects on the Toughness of a High Co–Ni Steel10.1002/adem.201600633 ↗
19. Formation and Growth Kinetics of Reverted Austenite During Tempering of a High Co-Ni Steel10.1007/s11661-016-3760-8 ↗
20. Austenite layer and precipitation in high Co–Ni maraging steel10.1016/j.micron.2014.07.008 ↗
21. (2010). Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature (Standard No. GBT228.1-2010).
22. (2009). Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIC of Metallic Materials (Standard No. ASTM E399-09).
23. Growth mode of austenite during reversion from martensite in Fe-2Mn-1.5Si-0.3C alloy: A transition in kinetics and morphology10.1016/j.actamat.2018.05.035 ↗
24. Orientation of austenite reverted from martensite in Fe-2Mn-1.5Si-0.3C alloy10.1016/j.actamat.2017.11.003 ↗
25. Role of cementite and retained austenite on austenite reversion from martensite and bainite in Fe-2Mn-1.5Si-0.3C alloy10.1016/j.actamat.2021.116772 ↗
26. Effects of Ni on austenite stability and fracture toughness in high Co-Ni secondary hardening steel10.1016/S1006-706X(17)30025-0 ↗
27. The important role of martensite laths to fracture toughness for the ductile fracture controlled by the strain in EA4T axle steel10.1016/j.msea.2017.03.110 ↗