journal article·2023-10-25Open access

Influence of Interface on Mechanical Behavior of Al-B4C/Al Laminated Composites under Quasi-Static and Impact Loading

Runwei Zhang, Zhenlong Chao, Longtao Jiang, Huimin Han, Bingzhuo Han, Shanqi Du, Tian Luo, Guoqin Chen, Yong Mei, Gaohui Wu

Materials· Volume 16· Issue 21

Abstract

In this study, Al-B4C/Al laminated composites with high interlayer bonding strength were fabricated by integrated hot-pressed sintering accompanied with hot rolling. The mechanical properties and interface behavior of the Al-B4C/Al laminated composites were investigated under quasi-static and impact loading. The results show that the Al-B4C/Al laminated composites obtain a high interface bonding strength, because no interlayer delamination occurs even after fractures under quasi-static and impact loads. The Al-B4C/Al laminated composites exhibit a better comprehensive mechanical performance, and the fracture can be delayed due to the high bonding strength interface. Moreover, laminated composites can absorb more impact energy than the monolithic material under impact loading due to the stress transition and relaxation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China

Institute of Defense Engineering, Academy of Military Science of the Chinese People’s Liberation Army, Beijing 100036, China

Funding

National Natural Science Foundation of China · Nature Scientific Foundation of Heilongjiang Province

References (46)

Show source-provided references
1. Effect of intermetallic compounds distribution on bonding strength of steel–aluminum laminates10.1016/j.matdes.2022.111106 ↗
2. Evolution of microstructure and mechanical properties in 2014 and 6063 similar and dissimilar aluminium alloy laminates produced by accumulative roll bonding10.1016/j.jallcom.2019.03.231 ↗
3. Effect of cross rolling on the interface morphology and mechanical properties of ARBed AA1100/AA7075 laminated metal composites10.1016/j.jallcom.2019.07.092 ↗
4. Influence of heat treatment on interface of Cu/Al bimetal composite fabricated by cold rolling10.1016/j.compositesb.2011.04.045 ↗
5. Solid-liquid cast-rolling bonding (SLCRB) and annealing of Ti/Al cladding strip10.1016/j.matdes.2017.01.042 ↗
6. Microstructure evolution and mechanical properties of Cu/Zn multilayer processed by accumulative roll bonding (ARB)10.1016/j.msea.2013.11.026 ↗
7. Microstructure evolution of Al/Mg/Al laminates in deep drawing process10.1016/j.jmrt.2019.08.053 ↗
8. Multiscale interfacial structure strengthening effect in Al alloy laminated metal composites fabricated by accumulative roll bonding10.1016/j.msea.2019.138354 ↗
9. In-situ investigation of deformation behavior and fracture mechanism of laminated Al/Ti composites fabricated by hot rolling10.1016/j.jallcom.2018.12.272 ↗
10. Hot pressing diffusion bonding of a titanium alloy to a stainless steel with an aluminum alloy interlayer10.1016/j.msea.2007.08.076 ↗
11. Effect of interface on mechanical properties and formability of Ti/Al/Ti laminated composites10.1016/j.jmrt.2021.07.021 ↗
12. Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing10.1016/j.jallcom.2004.07.057 ↗
13. Microstructure and mechanical properties of Ti/Al explosive cladding10.1016/j.matdes.2013.12.012 ↗
14. Effect of lamellar structural parameters on the bending fracture behavior of AA1100/AA7075 laminated metal composites10.1016/j.jmst.2021.04.075 ↗
15. Bioinspired hierarchical Al2O3/Al laminated composite fabricated by flake powder metallurgy10.1016/j.compositesa.2020.106187 ↗
16. Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites10.1016/S1003-6326(09)60040-6 ↗
17. Fabrication of Al-2 vol% Al2O3/SiC hybrid composite via accumulative roll bonding (ARB): An investigation of the microstructure and mechanical properties10.1016/j.msea.2014.04.013 ↗
18. Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: A comparative study10.1016/S0924-0136(03)00815-X ↗
19. Mechanical and microstructure comparison between microwave and spark plasma sintering of Al–B4C composite10.1016/j.jallcom.2015.09.024 ↗
20. The microstructure and ballistic performance of B4C/AA2024 functionally graded composites with wide range B4C volume fraction10.1016/j.compositesb.2018.12.147 ↗
21. Rapid preparation of B4Cp/Al composites with homogeneous interface via ultrasound assisted casting method10.1016/j.jallcom.2020.157659 ↗
22. Improving the mechanical properties of B4C/Al composites by solid-state interfacial reaction10.1016/j.jallcom.2020.154521 ↗
23. Synthesis of AA7075-AA7075/B4C bilayer composite with enhanced mechanical strength via plasma activated sintering10.1016/j.jallcom.2017.01.065 ↗
24. Synthesis of functionally graded AA7075-B4C com-posite with multi-level gradient structure10.1016/j.ceramint.2019.01.080 ↗
25. Design and deformation behaviour of a laminar B4C/Al composite10.1016/j.ceramint.2018.07.185 ↗
26. The metallurgical and deformation behaviours of laminar metal matrix composites after ballistic impact10.1016/j.jmatprotec.2009.01.008 ↗
27. Zhang, Y., Yu, Y., Xu, G., Fu, Y., Li, T., Wang, T., and Guo, Q. (2018). Microstructure and Performance of a Three-Layered Al/7075–B4C/Al Composite Prepared by Semi Continuous Casting and Hot Rolling. Metals, 8.10.3390/met8080600 ↗
28. Microstructure evolution and mechanical properties of B4C/6061Al neutron absorber composite sheets fabricated by powder metallurgy10.1016/j.jallcom.2017.09.312 ↗
29. The microstructure and influence of hot extrusion on tensile properties of (Gd+B4C)/Al composite10.1016/j.jallcom.2017.09.258 ↗
30. Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites10.1016/j.compositesb.2013.05.012 ↗
31. Enhancement in the microstructure and neutron shielding efficiency of sandwich type of 6061Al–B4C composite material via hot isostatic pressing10.1016/j.nucengdes.2014.10.020 ↗
32. Achieving strength-ductility synergy in cold spray additively manufactured Al/B4C composites through a hybrid post-deposition treatment10.1016/j.jmst.2018.12.022 ↗
33. Microstructural characteristics and mechanical behavior of B4Cp/6061Al composites synthesized at different hot-pressing temperatures10.1016/j.jmst.2019.03.040 ↗
34. Effect of impact loading and heat treatment on micro-structure and properties of multi-layered AZ31/AA1050 plates fabricated by single-shot explosive welding10.1016/j.matdes.2022.110411 ↗
35. Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites10.1016/j.matchar.2022.112243 ↗
36. Microtopography and mechanical properties of vacuum hot pressing Al/B4C composites10.1016/j.ceramint.2017.11.065 ↗
37. Structural evaluation and mechanical properties of nanostructured Al/B4C composite fabricated by ARB process10.1016/j.compositesb.2012.04.069 ↗
38. Automated quantification of reinforcement dispersion in B4C/Al metal matrix composites10.1016/j.compositesb.2019.107584 ↗
39. Strengthening and toughening B4C/Al composites via optimizing the Al2O3 distribution during hot rolling10.1016/j.jallcom.2022.163773 ↗
40. Effect of microstructure on tensile properties, impact toughness and fracture toughness of TC21 alloy10.1016/j.matdes.2019.107898 ↗
41. Crack propagation during Charpy impact toughness testing of Ti−Al−V−Mo−Zr alloy tubes containing equiaxed and lamellar microstructures10.1016/j.jallcom.2020.156581 ↗
42. Fracture characteristics analysis related to the microstructures in titanium alloys10.1016/0921-5093(96)10239-2 ↗
43. Effect of microstructure evolution of the lamellar alpha on impact toughness in a two-phase titanium alloy10.1016/j.msea.2016.09.017 ↗
44. Multiplied bending ductility and toughness of titanium matrix composites by laminated structure manipulation10.1016/j.matdes.2020.109237 ↗
45. Adding Cr and Mo simultaneously enhances the strength and impact toughness of TiC microparticle-reinforced steel matrix composites at high temperatures10.1016/j.jallcom.2022.167531 ↗
46. Zhao, Q., Liang, Y., Zhang, Z., Li, X., and Ren, L. (2016). Study on the impact resistance of bionic layered composite of TiC-TiB2/Al from Al-Ti-B4C system. Materials, 9.10.3390/ma9080708 ↗