journal article·2023-11-13Open access

Differences in Performance and Conductivity Persistence of New Reduced Graphene Oxide Air Filter Materials before and after Eliminating Static Electricity

Yun Gao, Huixin Shi, Xin Zhang, Jingyao Ma, Tao Yu

Materials· Volume 16· Issue 22

Abstract

Improving the filtration efficiency of air filter materials is an ongoing research goal. This study conducted in-depth research on a new reduced graphene oxide air filter material, and the differences in its performance and conductivity durability before and after eliminating static electricity were tested and analyzed. The results showed that the filtration efficiency of the reduced graphene oxide air filter material significantly decreased after eliminating static electricity. The maximum decrease in filtration efficiency was observed at a filtration velocity of 0.8 m/s, with PM10 > PM1.0 > PM2.5. In this case, the filtration efficiency decreased by 11.8%, 7.98%, and 7.17%, respectively. The maximum difference in filtration efficiency of 0.29 μm particulates was about 12.7%. Eliminating static electricity slightly increased the resistance (2.5~15.5 Pa). In addition, the new reduced graphene oxide air filter material exhibited good conductivity and stability after continuous testing. This study provides data support for the application of subsequent electrification sterilization, reference values for multi-angle applications, and the development of new composite air filter materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aerosol Filtration and Electrostatic Precipitation · High voltage insulation and dielectric phenomena · Membrane Separation Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Resources Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China

CSCEC Northwest Design and Research Institute Co., Ltd., Xi’an 710018, China

Wuhan Second Ship Design and Research Institute, Wuhan 430205, China

Funding

XAUAT Engineering Technology Co., Ltd. · Shaanxi Provincial Land Engineering Construction Group · New Urbanization Youth Observation Program of Xi’an University of Architecture and Technology

References (39)

Show source-provided references
1. Analysis of pollutants transport in heavy air pollution processes using a new complex-network-based model10.1016/j.atmosenv.2022.119395 ↗
2. Influences of meteorology on emission sources and physicochemical properties of particulate matter in Seoul, Korea during the heating period10.1016/j.atmosenv.2023.119733 ↗
3. Estimating spatio-temporal variability of aerosol pollution in Yunnan Province, China10.1016/j.apr.2022.101450 ↗
4. Field measurement of the impact of natural ventilation and portable air cleaners on indoor air quality in three occupant states10.1016/j.enbenv.2022.05.004 ↗
5. Dziubak, T., and Boruta, G. (2021). Experimental and Theoretical Research on Pressure Drop Changes in a Two-Stage Air Filter Used in Tracked Vehicle Engine. Separations, 8.10.3390/separations8060071 ↗
6. A comprehensive review of particle loading models of fibrous air filters10.1016/j.jaerosci.2022.106078 ↗
7. An in situ self-charging triboelectric air filter with high removal efficiency, ultra-low pressure drop, superior filtration stability, and robust service life10.1016/j.nanoen.2022.108021 ↗
8. CFD–DEM simulation of particle deposition characteristics of pleated air filter media based on porous media model10.1016/j.partic.2022.02.003 ↗
9. Removal of Size-Dependent Submicron Particles Using Metal−Organic Framework-Based Nanofiber Air Filters10.1021/acsami.2c04970 ↗
10. Cellulose-based materials for air purification: A review10.1016/j.indcrop.2023.116331 ↗
11. Dziubak, T., and Dziubak, S.D. (2020). Experimental study of filtration materials used in the car air intake. Materials, 13.10.3390/ma13163498 ↗
12. Dziubak, T., Bąkała, L., Dziubak, S.D., Sybilski, K., and Tomaszewski, M. (2021). Experimental research of fibrous materials for two-stage filtration of the intake air of internal combustion engines. Materials, 14.10.3390/ma14237166 ↗
13. Ciorîță, A., Suciu, M., Coroş, M., Varodi, C., Pogăcean, F., Măgeruşan, L., Mirel, V., Ștefan-van Staden, R.L., and Pruneanu, S. (2023). Antibacterial Enhancement of High-Efficiency Particulate Air Filters Modified with Graphene-Silver Hybrid Material. Microorganisms, 11.10.3390/microorganisms11030745 ↗
14. Modifying the Fiber Structure and Filtration Performance of Polyester Materials Based on Two Different Preparation Methods10.1021/acs.langmuir.3c00095 ↗
15. Dual-bionic, fluffy, and flame resistant polyamide-imide ultrafine fibers for high-temperature air filtration10.1016/j.cej.2022.139168 ↗
16. Zeng, Y.X., Liu, Q., Zhang, X., Wang, Z., Yu, T., Ren, F., and He, P.C. (2023). Comparative Filtration Performance of Composite Air Filter Materials Synthesized Using Different Impregnated Porous Media. Materials, 16.10.3390/ma16134851 ↗
17. High Filterable Electrospun Nanofibrous Membrane with Charged Electret After Electrification Treatment for Air Filtration10.1007/s12221-023-00110-1 ↗
18. Progress and perspective of polymer electret-based PM2.5 filtration: Efficiencies, regeneration, and energy implications10.1016/j.energy.2023.128504 ↗
19. Analysis and Comparative Experiment of New Reduced Graphene Oxide Filter and Electret Materials
20. Aramid-based electric heating films by incorporating carbon black10.1016/j.mtcomm.2022.105105 ↗
21. Microwave-assisted design of nanoporous graphene membrane for ultrafast and switchable organic solvent nanofiltration10.1038/s41467-023-36524-x ↗
22. Park, S.S., Lee, Y.S., Lee, S.W., Repo, E., Kim, T.H., Park, Y., and Hwang, Y. (2023). Facile Surface Treatment of 3D-Printed PLA Filter for Enhanced Graphene Oxide Doping and Effective Removal of Cationic Dyes. Polymers, 15.10.3390/polym15020269 ↗
23. Yang, M., Yang, B., Zhang, X., Wu, S.S., Yu, T., Song, H., Ren, F., He, P.C., and Zhu, Y.H. (2023). Experimental Study of the Factors Influencing the Regeneration Performance of Reduced Graphite Oxide Filter Materials under Water Cleaning. Materials, 16.10.3390/ma16114033 ↗
24. Improvement in desalination performance of thin film nanocomposite nanofiltration membrane using amine-functionalized multiwalled carbon nanotube10.1016/j.desal.2016.05.002 ↗
25. A comparative study of mechanical, thermal and electrical properties of graphene-, graphene oxide-and reduced graphene oxide-doped microfibrillated cellulose nanocomposites10.1016/j.compositesb.2018.04.018 ↗
26. Ma, H. (2016). Study on Buiding Environment PM2.5 Filtration Model of High Performance Filter Media and Application. [Ph.D. Thesis, Donghua University]. (In Chinese).
27. (2019). Air Filter (Standard No. GB/T 14295-2019).10.5465/AMBPP.2019.14295abstract ↗
28. Formation mechanism of copper-gilded coronet ornaments excavated from a Sui or early Tang tomb situated in Xi’an, Shaanxi10.1186/s40494-023-01000-8 ↗
29. Liu, F., Yu, T., Leng, W.J., and Zhang, X. (2023). Distribution and Fractal Characteristics of Outdoor Particles in High-Rise Buildings Based on Fractal Theory. Fractal Fract., 7.10.3390/fractalfract7090669 ↗
30. Controllably Adjusting the Hydrophobicity of Collagen Fibers for Enhancing the Adsorption Rate, Retention Capacity, and Separation Performance of Flavonoid Aglycones10.1021/acsami.3c00689 ↗
31. Ma, Y.L. (2010). Research on the Real World Performance of the Particulate Air Filter for General Ventilation in Air Handling Unit. [Master’s Thesis, Tianjin University]. (In Chinese).
32. Comparison and Analysis of the Performance of Glass-fiber and Melt-blown Chemical Fiber Filters before and after Eliminating Static Electricity
33. Effect of Solvent Treatment on Discharging of Melt-Blown Air Filter Materials
34. Ji, Y.M. (2018). Study on the preparation, structure and properties of graphene functional finished silk fabrics. [Master’s Thesis, Soochow University]. (In Chinese).
35. Composites of metal-organic frameworks (MOFs) and LDHs for energy storage and environmental applications: Fundamentals, progress, and perspectives
36. Reusable self-sterilization masks based on electrothermal graphene filters10.1021/acsami.0c16754 ↗
37. Qin, Q. (2019). Study on the Influence of Conductive Fiber on the Structure and Performance of Antistatic Filter Materials. [Master’s Thesis, South China University of Technology]. (In Chinese).
38. Investigation into durability degradation and fracture of cable bolts through laboratorial tests and hydrogeochemical modelling in underground conditions10.1016/j.tust.2023.105198 ↗
39. Characterisation of stress corrosion durability and time-dependent performance of cable bolts in underground mine environments10.1016/j.engfailanal.2023.107292 ↗