Acoustic Emission and K-S Metric Entropy as Methods to Analyze the Influence of Gamma-Aluminum Oxide Nanopowder on the Destruction Process of GFRP Composite Materials
Source abstract
Abstract
Composites are materials that are widely used in industry, including yachting, railway and aviation. The properties of these materials can be modified by changing the type of reinforcement, the type of matrix, as well as the use of additives in the form of fillers and nanofillers that improve their mechanical or specific parameters. Due to the fact that these materials are often used for important structures, computational models using FEM tools may not be sufficient to determine the actual strength parameters, and what is more, to check them during operation. When designing structures made of composite materials, it is necessary to use high safety factors due to their behavior under several different types of loads, which is still difficult to determine precisely. This situation makes these structures much heavier and characterized by much higher strength properties than those that would actually be needed. In this article, the Kolmogorov-Sinai (K-S) metric entropy was used to determine the transition from the elastic to the viscoelastic state in GFRP (glass fiber reinforced polymer) composite materials without and with the addition of nanoaluminum, during a static tensile test. Additionally, the acoustic emission method was used during the research. This signal was further processed, and graphs were made of the number of events and the amplitude as a function of time. The obtained values were plotted on tensile graphs. The influence of the nano-filler on these parameters was also analyzed. The presented results show that it is possible to determine additional parameters affecting the strength of the structure for any composite materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Marine Engineering, Gdynia Maritime University, 81-225 Gdynia, Poland
References (37)
Show source-provided references
1. Nanokompozyty polimerowe
2. Fusco, R., Moretti, L., Fiore, N., and D’Andrea, A. (2020). Behavior Evaluation of Bituminous Mixtures Reinforced with Nano-Sized Additives: A Review. Sustainability, 12.10.3390/su12198044 ↗
3. Abramczyk, N., Drewing, S., Panasiuk, K., and Żuk, D. (2022). Application of Statistical Methods to Accurately Assess the Effect of Gamma Aluminum Oxide Nanopowder on the Hardness of Composite Materials with Polyester–Glass Recyclate. Materials, 15.10.3390/ma15175957 ↗
4. Biodegradowalne nanokompozyty polimerowe
5. Polymer/clay nanocomposites10.14314/polimery.2002.326 ↗
6. Introduction to Organo-Clay Complexes and Intercalations
7. Okamoto, M. (2003). Polymer/Layered Silicate Nanocomposites, RAPRA Technology. Rapra Review Reports.
8. Rabek, J.F. (2008). Współczesna Wiedza o Polimerach, Wydawnictwo Naukowe PWN.
9. Kompozyty, biokompozyty i nanokompozyty polimerowe. Otrzymywanie, skład, właściwości I kierunkizastosowań
10. Effect of Al2O3 Nanoparticles on the Mechanical and Physical Properties of Epoxy Composite10.1007/s13369-017-2955-7 ↗
11. Monteserín, C., Blanco, M., Aranzabe, E., Aranzabe, A., Laza, J.M., Larrañaga-Varga, A., and Vilas, J.L. (2017). Effects of Graphene Oxide and Chemically-Reduced Graphene Oxide on the Dynamic Mechanical Properties of Epoxy Amine Composites. Polymers, 9.10.3390/polym9090449 ↗
12. PušnikČrešnar, K., Aulova, A., Bikiaris, D.N., Lambropoulou, D., Kuzmič, K., and Fras Zemljič, L. (2021). Incorporation of Metal-Based Nanoadditives into the PLA Matrix: Effect of Surface Properties on Antibacterial Activity and Mechanical Performance of PLA Nanoadditive Films. Molecules, 26.10.3390/molecules26144161 ↗
13. Smoleń, P., Czujko, T., Komorek, Z., Grochala, D., Rutkowska, A., and Osiewicz-Powęzka, M. (2021). Mechanical and Electrical Properties of Epoxy Composites Modified by Functionalized Multiwalled Carbon Nanotubes. Materials, 14.10.3390/ma14123325 ↗
14. Tarfaoui, M., Lafdi, K., Beloufa, I., Daloia, D., and Muhsan, A. (2018). Effect of Graphene Nano-Additives on the Local Mechanical Behavior of Derived Polymer Nanocomposites. Polymers, 10.10.3390/polym10060667 ↗
15. Effects of Al2O3 and Ba Onano-additives on mechanical characteristics of high-density polyethylene10.1016/j.matchemphys.2021.124251 ↗
16. Evaluation of mechanical properties of Al2O3 and TiO2 nano filled enhanced glass fiber reinforced polymer composites10.1002/app.44274 ↗
17. Design and testing of high-density polyethylene nanocomposites filled with lead oxide micro- and nano-particles: Mechanical, thermal, and morphological properties10.1002/app.47812 ↗
18. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites10.1016/j.compositesb.2008.01.002 ↗
19. Agureev, L.E., Kostikov, V.I., Eremeeva, Z.V., Barmin, A.A., Savushkina, S.V., and Ivanov, B.S. (2016). Aluminum Composites with Small Nanoparticles Additions: Corrosion Resistance. Mech. Mater. Sci. Eng. J.
20. An Experimental Investigation of Tribological Performance of a Lubricant Using Different Nano Additives
21. Sławski, S., Woźniak, A., Bazan, P., and Mrówka, M. (2022). The Mechanical and Tribological Properties of Epoxy-Based Composites Filled with Manganese-Containing Waste. Materials, 15.10.3390/ma15041579 ↗
22. Kyzioł, L., Panasiuk, K., Hajdukiewicz, G., and Dudzik, K. (2021). Acoustic Emission and K-S Metric Entropy as Methods for Determining Mechanical Properties of Composite Materials. Sensors, 21.10.3390/s21010145 ↗
23. Šofer, M., Cienciala, J., Fusek, M., Pavlíček, P., and Moravec, R. (2021). Damage Analysis of Composite CFRP Tubes Using Acoustic Emission Monitoring and Pattern Recognition Approach. Materials, 14.10.3390/ma14040786 ↗
24. Investigation of damage mechanisms in self-reinforced polyethylene composites by acoustic emission10.1016/j.compscitech.2005.07.013 ↗
25. A study on the failure detection of composite materials using an acoustic emission10.1016/j.compstruct.2006.04.070 ↗
26. Clustering of interlaminar and intralaminar damages in laminated composites under indentation loading using Acoustic Emission10.1016/j.compositesb.2018.02.028 ↗
27. The study of buckling and post-buckling behavior of laminated composites consisting multiple delaminations using acoustic emission10.1016/j.tws.2018.02.011 ↗
28. Šofer, M., Šofer, P., Pagáč, M., Volodarskaja, A., Babiuch, M., and Gruň, F. (2023). Acoustic Emission Signal Characterisation of Failure Mechanisms in CFRP Composites Using Dual-Sensor Approach and Spectral Clustering Technique. Polymers, 15.10.3390/polym15010047 ↗
29. Monitoring the initiation and growth of delamination in composite materials using acoustic emission under quasi-static three-point bending test10.1177/0731684411415140 ↗
30. Guo, Y., Zhu, S., Chen, Y., Liu, D., and Li, D. (2019). Acoustic Emission-Based Study to Characterize the Crack Initiation Point of Wood Fibre/HDPE Composites. Polymers, 11.10.3390/polym11040701 ↗
31. Panasiuk, K., and Dudzik, K. (2022). Determining the Stages of Deformation and Destruction of Composite Materials in a Static Tensile Test by Acoustic Emission. Materials, 15.10.3390/ma15010313 ↗
32. Acoustic Emission as a Method for Analyzing Changes and Detecting Damage in Composite Materials During Loading
33. The use of acoustic emission signal (AE) in mechanical tests
34. Application of metric entropy to determine properties of structural materials10.1590/0104-1428.03119 ↗
35. Application of metric entropy for results interpretation of composite materials mechanical tests10.1515/adms-2017-0006 ↗
36. Application of the Kolmogorov-Sinai Entropy in Determining the Yield Point, as Exemplified by the EN AW-7020 Alloy10.2478/jok-2019-0058 ↗
37. (2021). Plastics—Determination of Tensile Properties—Part 4: Test Conditions for Isotropic and Orthotropic Fiber-Reinforced Plastic Composites (Standard No. PN-EN ISO 527-4:2023-10).