journal article·2023-12-18Open access

Medical-Radiation-Shielding Film Fabricated by Imitating the Layered Structure Pattern of Abalone Shell and Verification of Its Shielding Effect

Seon-Chil Kim

Materials· Volume 16· Issue 24

Abstract

Radiation-shielding clothing for medical workers must be light and thin, thus ensuring flexibility. However, controlling the thickness and weight is limited by shielding performance requirements. This study aims to improve shielding performance by considering a shielding structure that mimics the internal structure of an abalone shell. Two shields were produced: a sheet made with a carrier process using a liquid polymer and tungsten mixture, and a fillet made by compounding the same material and laminated using a heat-treatment press after the injection process. The tungsten content and thickness were the same at 85 wt% and 0.3 mm, respectively. In the high-energy region, the shielding film based on the laminated structure of abalone shells showed a shielding rate that was higher by more than 7%. Compared to that of a 0.3 mm lead plate, the shielding ratio of the shielding film was approximately 16% lower at 120 kVp, thereby confirming the radiation-shielding effect of the layered-structure shielding film. Therefore, it is concluded that the laminated structure of the shielding film, which is identical to the internal laminated structure of the abalone shell, expands the impact area of incident radiation and attenuates the energy intensity, thereby improving the medical-radiation-shielding performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Environmental Engineering and Cultural Studies · Marine and Coastal Research · Radiation Shielding Materials Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Medical Informatics, Keimyung University, 1095 Dalgubeol-daero, Daegu 42601, Republic of Korea

Department of Biomedical Engineering, Keimyung University, 1095 Dalgubeol-daero, Daegu 42601, Republic of Korea

Funding

Ministry of Science and ICT

References (40)

Show source-provided references
1. Conventional and new lead-free radiation shielding materials for radiation protection in nuclear medicine: A review10.1016/j.radphyschem.2019.108439 ↗
2. Nano lead oxide and EPDM composite for development of polymer based radiation shielding material: Gamma irradiation and attenuation tests10.1016/j.radphyschem.2017.08.021 ↗
3. Lead oxide-decorated graphene oxide/epoxy composite towards X-ray radiation shielding10.1016/j.radphyschem.2018.01.008 ↗
4. Sources and toxicological effects of lead on human health10.4103/INJMS.INJMS_30_18 ↗
5. Polymeric composite materials for radiation shielding: A review10.1007/s10311-021-01189-9 ↗
6. Dose rates in nuclear medicine and the effectiveness of lead aprons: Updating the department’s knowledge on old and new procedures10.1097/MNM.0b013e32835c91d5 ↗
7. Study of radiation shielding materials on microstrip patch antenna for sustainability10.1016/j.matpr.2021.07.422 ↗
8. Habashi, F. (2017). Tungsten and the mining industry. J. Powder Metall. Min., 6.
9. The effect of tungsten particle sizes on X-ray attenuation properties10.1016/j.radphyschem.2021.109586 ↗
10. Characterization of some radiation shielding, optical, and physical properties of fluorophosphate glasses modified by Sm3+10.1007/s10854-021-05368-w ↗
11. Structure, optical, and radiation shielding properties of PVA–BaTiO3 nanocomposite films: An experimental investigation10.1016/j.radphyschem.2020.109281 ↗
12. Afghah, F., Dikyol, C., Altunbek, M., and Koc, B. (2019). Biomimicry in bio-manufacturing: Developments in melt electrospinning writing technology towards hybrid biomanufacturing. Appl. Sci., 9.10.3390/app9173540 ↗
13. Frictional performance of ostrich (Struthio camelus) foot sole on sand in all directions10.1007/s10237-020-01409-1 ↗
14. Elastic energy storage enabled magnetically actuated, octopus-inspired smart adhesive10.1002/adfm.202009217 ↗
15. Preparation of controllable hydroxyapaptite nanoparticles with abalone shells10.1016/j.matlet.2018.11.021 ↗
16. Disordered aragonite: The new high-pressure, high-temperature phase of CaCO310.1021/acs.jpcc.0c08309 ↗
17. Macroporous epoxy-carbon fiber structures with a sacrificial 3D printed polymeric mesh suppresses electromagnetic radiation10.1016/j.cej.2018.09.119 ↗
18. Ji, H.M., Liang, S.M., Li, X.W., and Chen, D.L. (2020). Kinking and cracking behavior in nacre under stepwise compressive loading. Mater. Sci. Eng. C Mater. Biol. Appl., 108.10.1016/j.msec.2019.110364 ↗
19. Processing-mediated different states of dispersion of multiwalled carbon nanotubes in PDMS nanocomposites influence EMI shielding performance10.1021/acsomega.8b02920 ↗
20. Electromagnetic interference shielding anisotropy enhanced by CFRP laminated structures10.1016/j.compscitech.2020.108616 ↗
21. Multilayer radiation shield for satellite electronic components protection10.1038/s41598-021-99739-2 ↗
22. ZnO–PbO–B2O3 glasses as gamma-ray shielding materials10.1016/S0168-583X(03)00462-2 ↗
23. Natural fibre high-density polyethylene and lead oxide composites for radiation shielding10.1016/S0969-806X(02)00470-X ↗
24. 2D MXenes for electromagnetic shielding: A review10.1002/adfm.202000883 ↗
25. Random lasing based on abalone shell10.1016/j.optcom.2021.126979 ↗
26. Investigation on gamma and neutron radiation shielding parameters for BaO/SrO–Bi2O3–B2O3 glasses10.1016/j.radphyschem.2017.12.010 ↗
27. Assessment of new composites containing polyamide-6 and lead monoxide as shields against ionizing photonic radiation based on computational and experimental methods10.1038/s41598-022-13556-9 ↗
28. Gamma-ray shielding characteristics of flexible silicone tungsten composites10.1016/j.apradiso.2019.108901 ↗
29. Numerical study of non-isothermal analysis of exiting sheet thickness in the calendering of micropolar-Casson fluid10.1177/87560879211025080 ↗
30. Akhtar, K., Khan, S.A., Khan, S.B., and Asiri, A.M. (2018). Handbook of Materials Characterization, Springer.
31. Korean Standards Association (2017). Testing Method of Lead Equivalent for X-ray Protective Devices, Korean Standards Association.
32. Recent advances in electromagnetic interference shielding properties of metal and carbon filler reinforced flexible polymer composites: A review10.1016/j.compositesa.2018.08.006 ↗
33. Female gonadal shielding with automatic exposure control increases radiation risks10.1007/s00247-017-3996-5 ↗
34. Permeability testing of radiation shielding concrete manufactured at industrial scale10.1617/s11527-018-1213-0 ↗
35. Feasibility of nanomaterial tungsten carbide as lead-free nanomaterial-based radiation shielding10.1016/j.radphyschem.2022.110492 ↗
36. Shielding properties of glasses with different heavy elements additives for radiation shielding in the energy range 15–300 keV10.1016/j.radphyschem.2018.04.029 ↗
37. Flexible sandwich-structured electromagnetic interference shielding nanocomposite films with excellent thermal conductivities10.1002/smll.202101951 ↗
38. Fabrication of Ni, Cr, W reinforced new high alloyed stainless steels for radiation shielding applications10.1016/j.rinp.2018.11.038 ↗
39. Development and characterization of new tungsten and tantalum containing composites for radiation shielding in medicine10.1016/j.nimb.2020.01.027 ↗
40. Ultrahigh conductive copper/large flake size graphene heterostructure thin-film with remarkable electromagnetic interference shielding effectiveness10.1002/smll.201704332 ↗