Computational Model of Effective Thermal Conductivity of Green Insulating Fibrous Media
Source abstract
Abstract
Modelling effective thermal properties is crucial for optimizing the thermal performance of materials such as new green insulating fibrous media. In this study, a numerical model is proposed to calculate the effective thermal conductivity of these materials. The fibers are considered to be non-overlapping and randomly oriented in space. The numerical model is based on the finite element method. Particular attention is paid to the accuracy of the results and the influence of the choice of the representative elementary volume (REV) for calculation (cubic or rectangular parallelepiped slice). The calculated effective thermal conductivity of fibrous media under different boundary conditions is also investigated. A set of usual mixed boundary conditions is considered, alongside the uniform temperature gradient conditions. The REV rectangular slice and uniform temperature gradient boundary conditions provide a more accurate estimate of the effective thermal conductivity and are therefore recommended for use in place of the usual cubic representative elementary volume and the usual mixed boundary conditions. This robust model represents a principal novelty of the work. The results are compared with experimental and analytical data previously obtained in the literature for juncus maritimus fibrous media, for different fiber volume fractions, with small relative deviations of 7%. Analytical laws are generally based on simplified assumptions such as infinitely long fibers, and may neglect heat transfer between different phases. Both short and long fiber cases are considered in numerical calculations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hygrothermal properties of building materials · Aerogels and thermal insulation · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
LaMCoS, INSA-Lyon, CNRS UMR 5259, Université de Lyon, 69621 Villeurbanne, France
Laboratoire de Physique et de Chimie de l’Environnement (ED-ST/LPCE), Université Joseph KI-ZERBO, Ouagadougou 03 BP 7021, Burkina Faso
EC2 Modélisation Campus Lyon Tech, 69603 Villeurbanne, France
Laboratory of Thermal and Energetic Systems Studies (LESTE), National Engineering School of Monastir, University of Monastir, 5019 Monastir, Tunisia
References (33)
Show source-provided references
1. Heat transfer in cellulose-based aerogels: Analytical modelling and measurements10.1016/j.energy.2015.03.039 ↗
2. Thermal conductivity of Kelvin cell cellulosic aerogels: Analytical and Monte Carlo approaches10.1007/s10853-017-0982-0 ↗
3. Experimental thermal properties characterization of insulating cork–gypsum composite10.1016/j.conbuildmat.2013.12.076 ↗
4. Thermal insulation performance assessment of agglomerated cork boards
5. Thermal conductivity of hemp concretes: Variation with formulation, density and water content10.1016/j.conbuildmat.2014.05.039 ↗
6. Hygrothermal performance of lime-hemp wall assemblies10.1177/1744259109355730 ↗
7. Transient hygrothermal behaviour of a hemp concrete building envelope10.1016/j.enbuild.2010.05.016 ↗
8. Effect of moisture and temperature on thermal properties of three bio-based materials10.1016/j.conbuildmat.2016.02.061 ↗
9. Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building10.1016/j.enbuild.2014.05.032 ↗
10. Experimental investigation of new biocomposite with low cost for thermal insulation10.1016/j.enbuild.2013.07.019 ↗
11. Renewable materials to reduce building heat loss: Characterization of date palm wood10.1016/j.enbuild.2010.10.014 ↗
12. Thermomechanical characterization of a bio-composite building material: Mortar reinforced with date palm fibers mesh10.1016/j.conbuildmat.2016.12.217 ↗
13. Saghrouni, Z., Baillis, D., Naouar, N., Blal, N., and Jemni, A. (2019). Thermal properties of new insulating juncus maritimus fibrous mortar composites/experimental results and analytical laws. Appl. Sci., 9.10.3390/app9050981 ↗
14. Automatic FEM model generation for evaluating thermal conductivity of composite with random materials arrangement10.1016/j.commatsci.2004.03.011 ↗
15. Penazzi, L. (2020). Construction d’une Fonction de Transfert par la Méthode Monte Carlo Symbolique: Application à la Thermique Couplée en Géométries Complexes. [Ph.D. Thesis, Ecole des Mines d’Albi-Carmaux].
16. Natural fiber reinforced composites: Sustainable materials for emerging applications10.1016/j.rineng.2021.100263 ↗
17. Nurazzi, N., Asyraf, M., Khalina, A., Abdullah, N., Aisyah, H., Rafiqah, S.A., Sabaruddin, F., Kamarudin, S., Norrrahim, M., and Ilyas, R. (2021). A review on natural fiber reinforced polymer composite for bullet proof and ballistic applications. Polymers, 13.10.3390/polym13040646 ↗
18. Review on natural fiber reinforced composites10.1016/j.matpr.2019.05.175 ↗
19. Numerical study on effective thermal conductivity of transparent electrospun polymer composite10.1016/j.applthermaleng.2019.113949 ↗
20. Prediction of effective thermal conductivities of woven fabric composites using unit cells at multiple length scales10.1557/jmr.2010.51 ↗
21. Influence of boundary conditions on computation of the effective thermal conductivity of foams10.1016/j.ijheatmasstransfer.2020.119781 ↗
22. Thermal conductive and radiative properties of solid foams: Traditional and recent advanced modelling approaches10.1016/j.crhy.2014.09.002 ↗
23. A Basic Study of Heat Transfer Through Foam Insulation10.1177/0021955X8402000203 ↗
24. Schuetz, M.A. (1983). Heat Transfer in Foam Insulation. [Ph.D. Thesis, Massachusetts Institute of Technology].
25. Öchsner, A., Murch, G.E., and de Lemos, M.J. (2008). Cellular and Porous Materials: Thermal Properties Simulation and Prediction, John Wiley & Sons.10.1002/9783527621408 ↗
26. Pore-level engineering of macroporous media for increased performance of solar-driven thermochemical fuel processing10.1016/j.ijheatmasstransfer.2014.07.020 ↗
27. Tomography-based determination of the effective thermal conductivity of fluid-saturated reticulate porous ceramics10.1115/1.2804932 ↗
28. A simple and efficient method for the evaluation of effective thermal conductivity of open-cell foam-like structures10.1016/j.ijheatmasstransfer.2013.07.032 ↗
29. Baillis, D., and Coquard, R. (2008). Cellular and Porous Materials: Thermal Properties Simulation and Prediction, John Wiley & Sons.
30. Towards gigantic RVE sizes for 3D stochastic fibrous networks10.1016/j.ijsolstr.2013.10.011 ↗
31. Apparent thermal conductivity of periodic two-dimensional composites10.1016/S0927-0256(02)00234-3 ↗
32. Conductive Heat Transfer in Metallic/Ceramic Open-Cell Foams10.1002/adem.200700331 ↗
33. Zhang, Y., and Fang, Q. (2022). BlenderPhotonics: An integrated open-source software environment for three-dimensional meshing and photon simulations in complex tissues. J. Biomed. Opt., 27.10.1117/1.JBO.27.8.083014 ↗