journal article·2024-01-22Open access

Load Deflection Characteristics of Orthodontic Gummetal® Wires in Comparison with Nickel–Titanium Wires: An In Vitro Study

Hisham Sabbagh, Mila Janjic Rankovic, Daniel Martin, Matthias Mertmann, Linus Hötzel, Andrea Wichelhaus

Materials· Volume 17· Issue 2

Abstract

The aim of this study was to investigate the load deflection characteristics of Gummetal® wires in comparison to nickel–titanium (NiTi) wires. Four different NiTi wires and one Gummetal® archwire were analyzed in two dimensions (0.014″ (0.36 mm) and 0.016″ × 0.022″ (0.41 mm × 0.56 mm)) and in two different orientations (edgewise and ribbonwise) using three-point bending tests at T = 37 °C. Force–displacement curves were recorded and analyzed. The Gummetal® 0.014″ wires exhibited higher forces compared to the NiTi wires at 2.0 mm deflection. At 1.0 mm deflection, the opposite pattern was observed. For the 0.016″ × 0.022″ Gummetal® wires, the forces were within the force interval of the NiTi wires at 2.0 mm deflection. At a deflection of 1.0 mm, no residual force was measurable for the Gummetal® wires. All the NiTi wires investigated showed hysteresis and a superelastic plateau. However, the Gummetal® did not form a plateau, but hysteresis was present. An easier plastic deformability compared to the NiTi wires was observed for all the tested geometries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Orthodontics and Dentofacial Orthopedics, University Hospital, LMU Munich, Goethestrasse 70, 80366 Munich, Germany

Dental Clinic, Medical Care Center, Untermeitingen, Landsbergerstrasse 7, 86836 Graben, Germany

References (41)

Show source-provided references
1. A review of contemporary archwires: Their properties and characteristics
2. Association of orthodontic force system and root resorption: A systematic review10.1016/j.ajodo.2014.12.026 ↗
3. Orthodontic treatment and root resorption: An overview of systematic reviews10.1093/ejo/cjaa058 ↗
4. Root resorptions in upper first premolars after application of continuous intrusive forces. Intra-individual study10.1007/BF01579165 ↗
5. Kyprianou, C., Chatzigianni, A., Daratsianos, N., and Bourauel, C. (2021). Vertical and Orovestibular Forces Generated by Beta-Titanium and Stainless-Steel Rectangular Wires in Labial and Fully Customized Lingual Bracket Systems. Materials, 14.10.3390/ma14195632 ↗
6. A radiographic comparison of apical root resorption after orthodontic treatment with 3 different fixed appliance techniques10.1067/mod.2000.99136 ↗
7. Comparison of changes in irregularity and transverse width with nickel-titanium and niobium-titanium-tantalum-zirconium archwires during initial orthodontic alignment in adolescents: A double-blind randomized clinical trial10.2319/061417-393.1 ↗
8. A clinical comparison of three aligning archwires in terms of alignment efficiency: A prospective clinical trial10.2319/041414-274.1 ↗
9. Influence of bending mode on the mechanical properties of nickel-titanium archwires and correlation to differential scanning calorimetry measurements10.1016/j.ajodo.2009.12.034 ↗
10. Review of Superelastic Differential Force Archwires for Producing Ideal Orthodontic Forces: An Advanced Technology Potentially Applicable to Orthognathic Surgery and Orthopedics10.1007/s11914-018-0457-5 ↗
11. Load-deflection characteristics of superelastic nickel-titanium wires10.2319/101206-423.1 ↗
12. Evolution, clinical applications, and prospects of nickel-titanium alloys for orthodontic purposes
13. Proffit, W.R., Fields, H.W., and Sarver, D.M. (2018). Contemporary Orthodontics, Elsevier/Mosby. [6th ed.].
14. First-principles study of Gum-Metal alloys: Mechanism of ideal strength
15. A Concept of “En Bloc” Movement of Teeth Using GUMMETAL Wires
16. Potentiality of the “Gum Metal” titanium-based alloy for biomedical applications10.1016/j.msec.2014.08.003 ↗
17. Schmeidl, K., Janiszewska-Olszowska, J., and Grocholewicz, K. (2021). Clinical Features and Physical Properties of Gummetal Orthodontic Wire in Comparison with Dissimilar Archwires: A Critical Review. Biomed Res. Int., 2021.10.1155/2021/6611979 ↗
18. High-cycle fatigue behavior of beta-titanium orthodontic wires10.4012/dmj.2014-012 ↗
19. A novel beta-titanium alloy orthodontic wire10.1016/j.kjms.2018.01.010 ↗
20. Friction behavior of the wire material Gummetal(R)10.1007/s00056-021-00317-y ↗
21. Schmeidl, K., Wieczorowski, M., Grocholewicz, K., Mendak, M., and Janiszewska-Olszowska, J. (2021). Frictional Properties of the TiNbTaZrO Orthodontic Wire-A Laboratory Comparison to Popular Archwires. Materials, 14.10.3390/ma14216233 ↗
22. Effects of various coating methods on the mechanical, physical, and aesthetic properties of GUMMETAL(R) archwires: In vitro study10.1016/j.ortho.2023.100753 ↗
23. An in vitro assessment of the influences of different wire materials and bracket systems when correcting dental crowding10.1007/s10856-020-06428-z ↗
24. Hasegawa, S. (2010). A New Super Elasto-Plastic Ti Alloy (Gummetal) Simplifies Treatment Procedure, Scientific Report of Rocky Mountain MORITA, Rocky Mountain MORITA.
25. New intrinsic mechanism on gum-like superelasticity of multifunctional alloys10.1038/srep02156 ↗
26. Multifunctional Alloys Obtained via a Dislocation-Free Plastic Deformation Mechanism10.1126/science.1081957 ↗
27. (2021). Dentistry—Wires for Use in Orthodontics (ISO 15841:2014 + Amd 1:2020). German version EN ISO 15841:2014 + A1:2020 (Standard No. DIN ISO 15841:2014 + Amd 1:2020).
28. (2007). Doorsets and Windows: Water-Tightness Test under Dynamic Pressure Cyclonic Aspects (Standard No. ISO 15821).
29. Field, A. (2009). Discovering Statistics Using SPSS, SAGE Publications.
30. Orthodontic wire: A continuing evolution10.1016/S1073-8746(97)80066-7 ↗
31. Different applications of various wire alloys in fixed appliance technic
32. The super-elastic property of the Japanese NiTi alloy wire for use in orthodontics10.1016/0889-5406(86)90021-1 ↗
33. Plastic deformation in a multifunctional Ti-Nb-Ta-Zr-O alloy10.1007/s11661-006-0037-7 ↗
34. Hasegawa, S. (2010). A New Super Elasto-Plastic Ti Alloy-GUMMETAL-Simplify Treatment Procedure, Clinical Use of Gummetal, Rocky Mountain MORITA.
35. On the mechanism of superelasticity in Gum metal10.1016/j.actamat.2008.11.013 ↗
36. Anomalous transformation-induced deformation in textured Gum Metal10.1016/j.actamat.2010.02.001 ↗
37. The deformation of “Gum Metal” in nanoindentation10.1016/j.msea.2007.07.097 ↗
38. Elastic deformation behavior of multi-functional Ti–Nb–Ta–Zr–O alloys10.2320/matertrans.46.3001 ↗
39. Super Multifunctional Alloy GUM METAL. Toyota Central R and D Lab
40. Mechanical properties and clinical applications of orthodontic wires10.1016/0889-5406(89)90251-5 ↗
41. Force systems in the initial phase of orthodontic treatment—A comparison of different leveling arch wires10.1007/s00056-006-0521-0 ↗