journal article·2024-02-04Open access

Preparation and Performance Study of High-Strength and Corrosion-Resistant Cement-Based Materials Applied in Coastal Acid Rain Areas

Junfeng Wang, Shaoxuan Zhang, Qionglin Fu, Yang Hu, Liulei Lu, Zhihao Wang

Materials· Volume 17· Issue 3

Abstract

Investigations regarding the preparation and durability of cement-based materials applied in specific coastal acid rain environments are scarce, particularly those involving the addition of four auxiliary cementitious materials (ACMs) to cement for modification. To improve the durability of concrete structures in coastal acid rain areas, a systematic study was conducted regarding the preparation of high-strength and corrosion-resistant cement-based materials using ACM systems composed of fly ash (FA), granulated blast furnace slag (GBFS), silica fume (SF), and desulfurization gypsum (DG) instead of partial cement. Through an orthogonal experimental design, the effect of the water–binder ratio, cementitious ratio, and replacement cement ratio on the compressive strength, corrosion resistance coefficient, and chloride ion permeability coefficient of the materials were analyzed and the mix proportions of the materials were evaluated and optimized using the comprehensive scoring method. The results show that implementing a FA:GBFS:SF:DG ratio of 2:6:1:1 to replace 60% of cement allows the consumption of calcium hydroxide crystals generated through cement hydration, promotes the formation of ettringite, optimizes the pore structures of cementitious materials, and improves the compressive strength, acid corrosion resistance, and chloride ion permeability of the materials. This study provides a reference for selecting concrete materials for buildings in coastal acid rain environments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, China

Key Laboratory of Ministry of Education for Tropical Marine Biological Resources Utilization and Protection, College of Fisheries and Life Science, Hainan Tropical Ocean University, Sanya 572022, China

School of Civil Engineering and Architecture, Hainan University, Haikou 570228, China

Funding

Key R&D project in Hainan Province

References (70)

Show source-provided references
1. Rebar corrosion detection, protection, and rehabilitation of reinforced concrete structures in coastal environments: A review10.1016/j.conbuildmat.2019.07.250 ↗
2. Atmospheric chloride deposition in field concrete at coastal region10.1016/j.conbuildmat.2018.09.094 ↗
3. Accelerated Life Test of Concrete in Chloride Environment10.1061/(ASCE)MT.1943-5533.0000182 ↗
4. Investigation of the effects of acid rain on the deterioration of cement concrete using accelerated tests established in laboratory10.1016/j.atmosenv.2004.05.017 ↗
5. Key inhibitory mechanism of external chloride ions on concrete sulfate attack10.1016/j.conbuildmat.2019.07.263 ↗
6. Chloride ions transportation behavior and binding capacity of concrete exposed to different marine corrosion zones10.1016/j.conbuildmat.2018.05.120 ↗
7. Studies on the aspects of chloride ion determination in different types of concrete under macro-cell corrosion conditions10.1016/j.buildenv.2004.10.005 ↗
8. Feng, N.Q., and Peng, G.F. (2006). Environmental Ecology and Technology of Concrete, Trans Tech Publications Ltd.. Available online: https://www.google.com/search?q=Penetration+Behavior+of+Chloride+Ions+into+Concrete+in+Coastal+Areas+%7C+Scientific.Net&rlz=1C1CHBF_enRS855RS855&oq=Penetration+Behavior+of+Chloride+Ions+into+Concrete+in+Coastal+Areas+%7C+Scientific.Net&gs_lcrp=EgZjaHJvbWUqBggAEEUYOzIGCAAQRRg70gEHNTAyajBqOagCALACAA&sourceid=chrome&ie=UTF-8.10.4028/b-qGXU2C ↗
9. Deterioration of compressive property of concrete under simulated acid rain environment10.1016/j.conbuildmat.2010.04.002 ↗
10. Deterioration of mode II fracture toughness, compressive strength and elastic modulus of concrete under the environment of acid rain and cyclic wetting-drying10.1016/j.conbuildmat.2019.116809 ↗
11. Pore structure in concrete exposed to acid deposit10.1016/j.conbuildmat.2013.08.075 ↗
12. A study on engineering properties and environmental impact of sustainable concrete with fly ash or GGBS10.1016/j.conbuildmat.2021.125776 ↗
13. Characterization of physico-chemical and functional properties of fly ash concrete mix10.1016/j.matpr.2021.06.353 ↗
14. Influence on mechanical properties of concrete of cement replacement with fly ash and river sand replacement with foundry sand10.1016/j.matpr.2022.06.146 ↗
15. The effect of silica fume on the washout resistance of environmentally friendly underwater concrete with a high-volume of siliceous fly ash10.1016/j.conbuildmat.2022.127058 ↗
16. Freeze-thaw cycle and abrasion resistance of alkali-activated FA and POFA-based mortars: Role of high volume GBFS incorporation10.1016/j.heliyon.2023.e17672 ↗
17. Evaluation of alkali-activated mortars containing high volume waste ceramic powder and fly ash replacing GBFS10.1016/j.conbuildmat.2019.03.194 ↗
18. Improving the eco-efficiency of fiber reinforced composite by ultra-low cement content/high FA-GBFS addition for structural applications: Minimization of cost, CO2 emissions and embodied energy10.1016/j.jobe.2023.107280 ↗
19. Effect of Nano-SiO2/Steel Fiber on the Mechanical Properties and Sulfate Resistance of High-Volume Fly Ash Cement Materials10.1016/j.conbuildmat.2023.133737 ↗
20. Mechanical properties of ternary blended mix concrete of fly ash and silica fume10.1016/j.matpr.2020.12.127 ↗
21. Ternary blending of cement with fly ash microsphere and condensed silica fume to improve the performance of mortar10.1016/j.cemconcomp.2014.02.002 ↗
22. Pore structure of concrete containing ternary cementitious blends10.1016/j.rinma.2019.100019 ↗
23. Resistance of concrete containing ternary cementitious blends to chloride attack and carbonation10.1016/j.jmrt.2020.01.066 ↗
24. Utilization of flue gas desulfurization gypsum as an activation agent for high-volume slag concrete10.1016/j.jclepro.2018.09.145 ↗
25. Acidic corrosion-abrasion resistance of concrete containing fly ash and silica fume for use as concrete floors in pig farm
26. Fresh and hardened properties of recycled plastic fiber reinforced self-compacting concrete made with recycled concrete aggregate and fly ash, slag, silica fume10.1016/j.jobe.2022.105384 ↗
27. A multi-perspective study on the influence of physical and chemical properties of 5 types of fly ash on the performance of high-volume blended fly ash cementitious slurry10.1016/j.conbuildmat.2023.134301 ↗
28. Multi-objective Optimization of Mix Proportions for Mass Concrete with Enhanced Resistance to Cracking and Reduced Temperature Rise
29. Autogenous self-healing of ultra-high-performance fiber-reinforced concrete with varying silica fume dosages: Secondary hydration and structural regeneration10.1016/j.cemconcomp.2022.104905 ↗
30. Baran, E., Hynowski, M., Kotwica, L., and Rogowski, J. (2023). Effect of Portland Cement on the Selected Properties of Flue Gas Desulfurization Gypsum-Based Plasters. Materials, 16.10.3390/ma16145058 ↗
31. Fly ash characterization by SEM-EDS10.1016/j.fuel.2006.05.016 ↗
32. Thaulow, Reaction products of densifted silica fume agglomerates in concrete10.1016/j.cemconres.2004.01.031 ↗
33. Analysis of geometric characteristics of GGBS particles and their influences on cement properties10.1016/S0008-8846(03)00252-7 ↗
34. A mild alcohol-salt route to synthesize alpha-hemihydrate gypsum microrods from flue gas desulfurization gypsum in large scale10.1088/2053-1591/aafc0e ↗
35. (2021). Test Method for Strength of Hydraulic Cement Mortar (Standard No. GB/T 17671-2021). (In Chinese).
36. (2009). Standard for Test Methods of Long-Term Performance and Durability of Ordinary Concrete (Standard No. GB/T 50082-2009). (In Chinese).
37. Application of the Nernst-Einstein equation to concrete10.1016/S0008-8846(96)00200-1 ↗
38. Optimization of Preparation of Foamed Concrete Based on Orthogonal Experiment and Range Analysis10.3389/fmats.2021.778173 ↗
39. Orthogonal experimental study on hybrid-fiber high-durability concrete for marine environment10.1016/j.jmrt.2021.05.088 ↗
40. Optimization design of ultrahigh-performance concrete based on interaction analysis of multiple factors
41. Casella, G., and Berger, R.L. (2001). Statistical Inference, Duxbury Press.
42. Properties of the cement containing hybrid micro-fibers and polymer latex using the orthogonal test: A comparative study of freshwater and seawater curing conditions10.1016/j.conbuildmat.2023.134661 ↗
43. The effect of superfine tea powder addition on the acrylamide content of innovative Xinjiang nang products (tea nang)10.1080/19440049.2020.1769199 ↗
44. Micro-structural development of gap-graded blended cement pastes containing a high amount of supplementary cementitious materials10.1016/j.cemconcomp.2012.06.010 ↗
45. Utilization of limestone powder and fly ash in blended cement: Rheology, strength and hydration characteristics10.1016/j.conbuildmat.2019.117228 ↗
46. Acid resistance of quaternary blended recycled aggregate concrete
47. Sulfuric acid resistance of high-volume fly ash concrete10.1016/j.buildenv.2005.10.024 ↗
48. Durability properties of concrete with blended cements10.1002/maco.201206699 ↗
49. Influence of liquid accelerators combined with mineral admixtures on early hydration of cement pastes10.1016/j.conbuildmat.2021.123659 ↗
50. Packing effect and pozzolanic reaction of fly ash in mortar10.1016/j.cemconres.2004.09.030 ↗
51. An approach to the recent trends of concrete science and technology
52. Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial transition zone10.1016/S0008-8846(03)00205-9 ↗
53. The effect of cement paste volume and w/c ratio on shrinkage strain, water absorption and compressive strength of high performance concrete10.1016/j.conbuildmat.2017.02.033 ↗
54. Relationship between water permeability and pore structure of Portland cement paste blended with fly ash10.1016/j.conbuildmat.2018.04.147 ↗
55. The relationship between autogenous shrinkage and pore structure of cement paste with mineral admixtures10.1016/j.conbuildmat.2010.04.018 ↗
56. The nature of the hydration products in hardened cement pastes10.1016/S0958-9465(99)00036-0 ↗
57. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes10.1016/j.conbuildmat.2011.07.007 ↗
58. Microstructure and composition characterisation of three 20-year-old GGBS-OPC blended pastes10.1016/j.conbuildmat.2016.06.057 ↗
59. Durability and Mechanical Properties of High Strength Concrete Incorporating Ultra Fine Ground Granulated Blast-Furnace Slag10.1016/j.conbuildmat.2012.11.052 ↗
60. Performance evaluation of nano-silica and silica fume on enhancing acid resistance of cement-based composites for underground structures10.1007/s11771-020-4473-0 ↗
61. Water resistant blended cements containing flue-gas desulfurization gypsum, Portland cement and fly ash for structural applications10.1016/j.cemconcomp.2019.04.033 ↗
62. Investigation into the synergistic effects in hydrated gelling systems containing fly ash, desulfurization gypsum and steel slag10.1016/j.conbuildmat.2018.07.241 ↗
63. Utilization of pretreated fly ash to enhance the chloride binding capacity of cement-based material10.1016/j.conbuildmat.2018.04.178 ↗
64. Chloride binding of cement pastes with fly ash exposed to CaCl2 solutions at 5 and 23 °C10.1016/j.cemconcomp.2018.12.011 ↗
65. The volumetric stability, chloride binding capacity and stability of the Portland cement-GBFS pastes: An approach from the viewpoint of hydration products10.1016/j.conbuildmat.2019.02.026 ↗
66. Chloride binding behaviors and early age hydration of tricalcium aluminate in chloride-containing solutions10.1016/j.cemconcomp.2023.104928 ↗
67. Comparison of environmental impacts of fly ash and slag as cement replacement materials for mass concrete and the impact of transportation
68. Analysis of theoretical carbon dioxide emissions from cement production: Methodology and application10.1016/j.jclepro.2021.130270 ↗
69. Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
70. Wojtacha-Rychter, K., Kucharski, P., and Smolinski, A. (2021). Conventional and Alternative Sources of Thermal Energy in the Production of Cement-An Impact on CO2 Emission. Energies, 14.10.3390/en14061539 ↗