journal article·2024-02-07Open access

Effects of Heat-Treatment and Cold-Rolling on Mechanical Properties and Impact Failure Resistance of New Al 6082 Aluminum Alloy by Continuous Casting Direct Rolling Process

Jun-Ren Zhao, Fei-Yi Hung, Jian-Hong Chen

Materials· Volume 17· Issue 4

Abstract

Al 6082 aluminum alloy has excellent corrosion resistance, strength, and formability. However, owing to the recrystallization effect of a hot working process, coarse grains form easily in this material, which reduces its strength and service life. The novel continuous casting direct rolling (CCDR) method can prevent the deterioration of this material. Thus, we used CCDR Al 6082 aluminum alloy as the research material in this study. By subjecting a CCDR Al 6082 aluminum alloy to heat treatment (T4 and T6) and cold rolling, the influence of recrystallization effect on its mechanical properties and on impact failure resistance were explored. The results demonstrated that the specimen subjected to T4 heat treatment had a higher elongation and that the specimen subjected to T6 heat treatment had a higher strength. After cold rolling, the hardness and strength of the specimens subjected to different heat treatments (coded T4R4 and T6R4) increased because of the work’s hardening effect. Moreover, the elongations of both specimens decreased, but they were higher than the industrial standard (>10%). The strength of specimen T6R4 was higher (up to 400 MPa) than specimen T4R4. Moreover, relative to specimen T4R4, specimen T6R4 had greater tensile and Charpy impact failure toughness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, National Cheng Kung University, Tainan 701, Taiwan

Funding

Ministry of Science and Technology of Taiwan

References (52)

Show source-provided references
1. Phases and microstructures of high Zn-containing Al–Zn–Mg–Cu alloys10.1007/s12598-014-0222-6 ↗
2. A study on the dynamic mechanical behavior and microtexture of 6082 aluminum alloy under different direction10.1016/j.vacuum.2019.109119 ↗
3. Peruš, I., Kugler, G., Malej, S., and Terčelj, M. (2022). Contour Maps for Simultaneous Increase in Yield Strength and Elongation of Hot Extruded Aluminum Alloy 6082. Metals, 12.10.3390/met12030461 ↗
4. Effects of strain rate on dynamic mechanical behavior and microstructure evolution of 5A02-O aluminum alloy10.1016/j.msea.2014.03.081 ↗
5. Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration10.1126/science.1258544 ↗
6. Versatility of trace nano-TiC-TiB2 in collaborative control of solidification-rolling-welding microstructural evolution in Al–Mg–Si alloy for enhanced properties10.1016/j.msea.2022.143661 ↗
7. Chen, Y., Wei, W., Zhao, Y., Shi, W., Zhou, X., Rong, L., Wen, S., Wu, X., Gao, K., and Huang, H. (2023). Effect of the Solid Solution and Aging Treatment on the Mechanical Properties and Microstructure of a Novel Al-Mg-Si Alloy. Materials, 16.10.3390/ma16217036 ↗
8. Dependency of mechanical properties on artificial aging conditions for EN AW 6082 aluminum alloy10.1051/metal/2023017 ↗
9. Tan, E. (2006). The Effect of Hot-Deformation on Mechanical Properties and Age Hardening Characteristics of Al-Mg-Si Based Wought Aluminum Alloys. [Master’s Thesis, Middle East Technical University]. Available online: https://hdl.handle.net/11511/16096.
10. Formulation of initial artificial age-hardening response in an Al-Mg-Si alloy based on the cluster classification using a high-detection-efficiency atom probe10.1016/j.jallcom.2017.10.220 ↗
11. Influence of different solution methods on microstructure, precipitation behavior and mechanical properties of Al–Mg–Si alloy10.1016/S1003-6326(18)64717-X ↗
12. The effect of homogenization and chemical compositions of 6005 and 6082 aluminium alloys on the cold forming process
13. The effect of processing and Mn content on the T5 and T6 properties of AA6082 profiles10.1016/j.jmatprotec.2005.09.029 ↗
14. Deformation behavior of Al–Mg–Si alloy at the elevated temperature10.1016/j.jmatprotec.2006.11.207 ↗
15. Očenášek, V., and Sedláček, P. (2011, January 18–20). The effect of surface recrystallized layers on properties of extrusions and forgings from high strength aluminium alloys. Proceedings of the 20th International Conference on Metallurgy and Materials, Brno, Czech Republic.
16. Thermal analysis of the impact of RT storage time on the strengthening of an Al-Mg-Si alloy
17. Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments10.1016/j.msea.2021.140901 ↗
18. Exploring the potential of FSW-ed Al–Zn–Mg–Cu-based composite reinforced by trace in-situ nanoparticles in manufacturing workpiece with customizable size and high mechanical performances10.1016/j.compositesb.2022.110425 ↗
19. Continuous casting direct rolling technology at Nippon Steel’s Sakai Works
20. Advanced technology of combined thin slab continuous casting and steel strip hot rolling10.1007/s11015-019-00747-5 ↗
21. An experimental investigation on the effect of cooling rate during combined continuous casting and rolling process on mechanical properties of 7075 aluminum alloy10.1007/s12666-019-01855-1 ↗
22. Effects of heat treatment on a novel continuous casting direct rolling 6056 aluminum alloy: Cold rolling characteristics and tensile fracture properties10.1016/j.jmrt.2021.01.037 ↗
23. Connolly, R.S. (1987). Method of Continuous Casting and Rolling Strip. (4,675,974), U.S. Patent.
24. Temperature equalization by the radiative converter for a slab in continuous casting direct rolling
25. Hot cracking of low alloy steels in simulated continuous casting-direct rolling process10.2355/isijinternational1966.28.1021 ↗
26. Huang, B.C., Chang, K.C., and Hung, F.Y. (2021). Study on microstructure, mechanical properties and erosion characteristics of Al-Si alloy manufactured by continuous casting direct rolling process. Appl. Sci., 11.10.3390/app11188351 ↗
27. Effect of rolling and subsequent heat treatment on tensile property and crystal orientation of 5052 Al alloy
28. The effect of cold rolling and annealing on the serrated yielding phenomenon of AA5182 aluminum alloy10.1016/j.msea.2004.01.041 ↗
29. Influence of hot band annealing on cold-rolled microstructure and recrystallization in AA 601610.1007/s11661-022-06846-4 ↗
30. The effects of cold rolling and stabilization treatment on the improvement of microstructure, mechanical properties, and corrosion behavior of AA5083 sheet10.1007/s11665-022-07273-7 ↗
31. Enhancing the tensile yield strength of A6082 aluminum alloy with rapid heat solutionizing10.1016/j.msea.2017.07.021 ↗
32. Study of microstructure and tensile properties of infrared-heat-treated cast-forged 6082 aluminum alloy10.1016/j.jmrt.2017.10.004 ↗
33. (2014). Standard Test Methods and Definitions for Mechanical Testing of Steel Products. Standard No. ASTM A370-23.
34. Precipitation behavior of Al-Mg-Si alloys with high silicon content10.1023/A:1018569226499 ↗
35. Anderson, K., Kaufman, J.G., and Weritz, J. (2019). ASM Handbook: Volume 2B Properties and Selection of Aluminum Alloys, ASM International.10.31399/asm.hb.v02b.9781627082105 ↗
36. Effect of cast and extruded stock on grain structure of EN AW 6082 alloy forgings10.1179/1743284713Y.0000000407 ↗
37. Processing of high strength EN AW 6082 forgings without a solution heat treatment10.1016/j.msea.2016.07.062 ↗
38. Comparison of cast and extruded stock for the forging of AA6082 alloy suspension parts10.4028/www.scientific.net/AMR.939.299 ↗
39. The precipitation sequence in Al–Mg–Si alloys10.1016/S1359-6454(98)00059-7 ↗
40. Combination of sever plastic deformation and precipitation hardening processes affecting the mechanical properties in Al–Mg–Si alloy10.1016/j.matdes.2014.12.011 ↗
41. Effect of cryogenic treatment on mechanical properties and microstructure of aluminum 6082 alloy10.1016/j.matpr.2020.02.488 ↗
42. Microstructural evolutions and mechanical properties of 6082 aluminum alloy part produced by a solution-forging integrated process10.1016/j.jmatprotec.2022.117715 ↗
43. Chang, Y.L., Hung, F.Y., and Lui, T.S. (2018). Enhancement of the Young’s Modulus through Infrared Heat Treatment: A Study of the Microstructure and the Mass Effect of Real Body 6082 Aluminum Forgings. Metals, 8.10.3390/met8040239 ↗
44. Impact of reversed austenite on the impact toughness of the high-strength steel of low carbon medium manganese10.1007/s11837-017-2732-9 ↗
45. Effect of Cr and Zr on the grain structure of extruded EN AW 6082 alloy10.1007/s12540-014-4018-x ↗
46. Investigation of tensile behaviour of cryorolled and room temperature rolled 6082 Al alloy10.1016/j.msea.2017.03.051 ↗
47. Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing10.1016/j.jmst.2020.04.015 ↗
48. Effects of cold rolling and heat treatment on microstructure and mechanical properties of AA 5052 aluminum alloy10.1016/S1003-6326(15)63866-3 ↗
49. Effects of severe cold rolling on tensile properties and stress corrosion cracking of 7050 aluminum alloy10.1016/j.matchemphys.2009.05.048 ↗
50. Effect of solid solution process on microstructure and properties of 6082 aluminum alloy10.1088/2053-1591/ab4d73 ↗
51. The influence of metallurgical factors on low cycle fatigue behavior of ultra-fine grained 6082 Al alloy10.1016/j.ijfatigue.2018.01.018 ↗
52. Mechanical properties and microstructure revolution of vibration assisted wire arc additive manufacturing 2319 aluminum alloy10.1016/j.msea.2023.145634 ↗