journal article·2024-04-22Open access

Preparation of a (Ca,Sr,Ba)ZrO3 Crucible by Slip Casting for the Vacuum Induction Melting of NiTi Alloy

Shijia Ding, Mingliang Li, Hailong Wang, Jinpeng Zhu, Gang Shao, Hongliang Xu, Hongxia Lu, Rui Zhang

Materials· Volume 17· Issue 8

Abstract

Vacuum induction melting is a more energy-efficient process for the preparation of a titanium alloy with good homogeneity and low cost. But the crucial problem for this technology is in developing a crucible refractory with high stability. In the present work, a novel (Ca,Sr,Ba)ZrO3 crucible was prepared by slip casting and its performance in melting NiTi alloy was studied. The results showed that a single solid solution was formed with a homogeneous distribution of metal elements after sintering at 1500 °C. It was found that the total content of oxygen and nitrogen remaining in the TiNi alloy after melting in the (Ca,Sr,Ba)ZrO3 crucible was 0.0173 wt.%, which fulfills the ASTM standard on biomedical TiNi alloys. The good resistance of the (Ca,Sr,Ba)ZrO3 crucible to molten NiTi has a relationship with the sluggish diffusion effect of high-entropy ceramics. This study provides insights into the process of designing highly suitable crucible material for melting a NiTi alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China

Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou 450001, China

Funding

National Natural Science Foundation of China · Henan Province University Science and Technology Innovation Team Support Program · Henan Science and Technology Research Project

References (30)

Show source-provided references
1. Wing morphing control with shape memory alloy actuators10.1177/1045389X12471866 ↗
2. Medical shape memory alloy applications—The market and its products10.1016/j.msea.2003.10.326 ↗
3. Influence of carbon on martensitic phase transformations in NiTi shape memory alloys10.1016/j.actamat.2006.10.006 ↗
4. Vacuum induction melting of NiTi shape memory alloys in graphite crucible10.1016/j.msea.2007.04.039 ↗
5. TiAl–Nb melt interaction with pyrolytic boron nitride crucibles10.1016/j.matchemphys.2009.09.021 ↗
6. High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite crucibles10.1016/j.jallcom.2004.05.002 ↗
7. Induction melting of γ-TiAl in CaO crucibles10.1016/j.intermet.2008.08.008 ↗
8. Preparation of TiFe based alloys melted by CaO crucible and its hydrogen storage properties10.1016/j.jallcom.2014.08.154 ↗
9. Physical erosion of yttria crucibles in Ti–54Al alloy casting process10.1016/j.jmatprotec.2011.06.021 ↗
10. Comparison of directional solidification of γ-TiAl alloys in conventional Al2O3 and novel Y2O3-coated Al2O3 crucibles10.1016/j.jeurceramsoc.2012.11.006 ↗
11. Predicting thermodynamic stability of crucible oxides in molten titanium and titanium alloys10.1016/j.commatsci.2006.03.006 ↗
12. Preparation of a novel Sr-Zr oxide refractory for induction melting of high-activity alloy10.1016/j.jeurceramsoc.2021.05.054 ↗
13. Evaluation of Yttria Applicability as a Crucible for Induction Melting of TiAl Alloy10.2320/matertrans.MAW201002 ↗
14. Corrosion resistance of calcium zirconate crucible to titanium-copper melts10.1016/j.jeurceramsoc.2022.02.011 ↗
15. Preparation of Y2O3 Doped SrZrO3 Refractory and Study on its Interface Reaction with Molten TiNi Alloys10.4028/www.scientific.net/KEM.768.256 ↗
16. Improved stability of BaZrO3 refractory with Y2O3 additive and its interaction with titanium melts10.1016/j.jallcom.2017.07.270 ↗
17. High-entropy ceramics: Review of principles, production and applications10.1016/j.mser.2021.100644 ↗
18. (Ca,Sr,Ba)ZrO3: A promising entropy-stabilized ceramic for titanium alloys smelting10.1016/j.jmst.2020.05.033 ↗
19. The effect of slip casting parameters on the green density of MgAl2O4 spinel10.1016/j.ceramint.2017.01.151 ↗
20. Influences of solid content of slurry on the microstructure of CaO crucible prepared by slip casting10.1111/ijac.14318 ↗
21. Fabrication of Y2O3 transparent ceramics by pressure-assisted alcoholic slip casting10.1016/j.ceramint.2023.09.100 ↗
22. Alumina/MWCNTs composites by aqueous slip casting and pressureless sintering10.1016/j.ceramint.2013.01.087 ↗
23. The stability mechanisms of an injectable calcium phosphate ceramic suspension10.1007/s10856-010-4047-z ↗
24. The effect of plasma-assisted ball milling on preparation and sintering behavior of (Zr0.1429Hf0.1429Ce0.1429Y0.2857La0.2857)O2-δ high entropy fluorite oxide10.1016/j.ceramint.2022.12.185 ↗
25. Preparation of transparent Y2O3 ceramic by slip casting and vacuum sintering10.1016/S1002-0721(10)60639-4 ↗
26. A review on crucibles for induction melting of titanium alloys10.1016/j.matdes.2019.108295 ↗
27. Interaction between CA6-MA crucible and molten wrought Ni-based superalloys10.1016/j.jeurceramsoc.2022.11.050 ↗
28. The effects of vacuum induction melting and electron beam melting techniques on the purity of NiTi shape memory alloys10.1016/j.msea.2006.02.171 ↗
29. Evaluation of the microstructure and property of TiNi SMA prepared using VIM in BaZrO3 crucible10.1016/j.vacuum.2019.108843 ↗
30. Medium-entropy (Me,Ti)0.1(Zr,Hf,Ce)0.9O2 (Me = Y and Ta): Promising thermal barrier materials for high-temperature thermal radiation shielding and CMAS blocking10.1016/j.jmst.2022.01.019 ↗