journal article·2024-05-11Open access

Axial Tensile Ultimate Strength of an Unbonded Flexible Riser Based on a Numerical Method

Dongya Li, Wanchao Jiang, Qingqing Xing, Qingsheng Liu

Materials· Volume 17· Issue 10

Abstract

Unbonded flexible risers consist of several helical and cylindrical layers, which can undergo large bending deformation and can be installed to different configurations to adapt to harsh marine environments, and is a key equipment in transporting oil and gas resources from Ultra Deep Waters (UDWs) to offshore platforms. The helical interlayer of an unbonded flexible riser makes the structural behavior difficult to predict. In this paper, the axial tensile behavior and the axial tensile ultimate strength of an unbonded flexible riser are studied based on a typical 2.5-inch eight-layer unbonded flexible riser model, and verified through a theoretical method considering the contact between adjacent layers. First, the balance equation of separate layers is deduced by a functional principle, and then the overall theoretical model of an unbonded flexible riser is established considering the geometric relationship between adjacent layers. Then, the numerical model considering the detailed geometric properties of an unbonded flexible riser is established to simulate the axial tensile behavior. Finally, after being verified through the experimental results, the axial tensile stiffness and axial tensile strength of an unboned flexible riser considering the elasticity of the tensile armor layer are studied using the proposed two methods. Additionally, the effect of frictional coefficients is conducted. The numerical and theoretical results show good agreement with the test results, and the friction between adjacent layers would increase the axial tensile stiffness of an unbonded flexible riser.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical stress and fatigue analysis · Vibration and Dynamic Analysis · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Applied Technology College of Soochow University, Suzhou 215000, China

School of Mechanical and Electric Engineering, Soochow University, Suzhou 215131, China

Funding

Natural Science Foundation of Jiangsu Province · Jiangsu Funding Program for Excellent Postdoctoral Talent

References (37)

Show source-provided references
1. Malta, E.R., and Martins, C.A. (2014, January 8–13). Finite element analysis of flexible pipes under compression. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering, San Francisco, CA, USA.
2. Epsztein, T., Demanze, F., Lefebvre, X., and Jarrin, J. (2011, January 2–5). New anti H2S layer for flexible pipes. Proceedings of the Offshore Technology Conference, Houston, TX, USA.10.4043/21371-MS ↗
3. Rytter, J. (2004, January 20–25). Qualification approach to unbonded flexible pipes with fibre reinforced armour layer. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering, Vancouver, BC, Canada.10.1115/OMAE2004-51175 ↗
4. Lambert, A., Do, A.T., Felix-Henry, A., and Grosjean, F. (2012, January 1–6). Qualification of unbonded dynamic riser with carbon fiber composite armours. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering, Rio de Janeiro, Brazil.10.1115/OMAE2012-83130 ↗
5. Kalman, M.D., Yu, L., Seymour, M., and Erni, J. (May, January 30). Qualification of composite armor materials for unbonded flexible pipe. Proceedings of the Offshore Technology Conference, Houston, TX, USA.
6. Theoretical and numerical methods to predict the behavior of unbonded flexible riser with composite armor layers subjected to axial tension10.1016/j.oceaneng.2020.107038 ↗
7. Calculation of stresses and slip in structural layers of unbonded flexible pipes10.1115/1.3257019 ↗
8. Berge, S., Engseth, A., Fylling, I., Leira, B.J., Nygaard, I., Larsen, C.M., and Olufsen, A. (1992). Handbook on Design and Operation of Flexible Pipes, STF70 A92006, SINTEF.
9. Kebadze, E. (2000). Theoretical Modelling of Unbonded Flexible Pipe Cross-Sections. [Ph.D. Thesis, South Bank University].
10. Slip initiation and progression in helical armouring layers of unbonded flexible pipes and its effect on pipe bending behaviour10.1243/0309324011514458 ↗
11. An analytical model to predict the bending behavior of unbonded flexible pipes10.5957/jsr.2013.57.3.171 ↗
12. A symmetric linear elastic model for helical wire strands under axisymmetric loads10.1243/03093247V315389 ↗
13. Analytical closed-form expressions for the structural response of helical constructions to thermal loads10.1016/j.ijmecsci.2016.08.010 ↗
14. An anisotropic friction model in non-bonded flexible risers10.1016/j.marstruc.2018.02.012 ↗
15. Friction models for evaluating dynamic stresses in non-bonded flexible risers10.1016/j.marstruc.2017.05.010 ↗
16. Improvement of the bending behavior of a flexible riser: Part I—Nonlinear bending behavior considering the shear deformation of polymer layers10.1016/j.apor.2020.102204 ↗
17. An Abaqus implementation of the extended finite element method10.1016/j.engfracmech.2008.10.015 ↗
18. Systematic literature review of the application of extended finite element method in failure prediction of pipelines10.1016/j.jpse.2021.02.003 ↗
19. Ribeiro, E.J., de Sousa, J.R., Ellwanger, G., and Lima, E. (2003, January 25–30). On the tension-compression behaviour of flexible risers. Proceedings of the Thirteenth International Offshore and Polar Engineering Conference, Honolulu, HI, USA.
20. On the response of flexible risers to loads imposed by hydraulic collars10.1016/j.apor.2009.07.005 ↗
21. Bahtui, A. (2008). Development of a Constitutive Model to Simulate Unbonded Flexible Riser Pipe Elements. [Ph.D. Thesis, Department of Mechanical Engineering Brunel University].
22. Numerical and analytical modeling of unbonded flexible risers10.1115/1.3058700 ↗
23. Behavior of unbonded flexible risers subject to axial tension10.1007/s13344-014-0020-9 ↗
24. Analytical and numerical models to predict the behavior of unbonded flexible risers under torsion10.1007/s13344-016-0015-9 ↗
25. Theoretical and numerical analysis of bending behavior of unbonded flexible risers10.1016/j.marstruc.2015.10.001 ↗
26. Nonlinear finite element analysis of failure modes and ultimate strength of flexible pipes10.1016/j.marstruc.2017.03.007 ↗
27. A simplified multi-layered finite element model for flexible pipes10.1016/j.marstruc.2018.08.006 ↗
28. Behavior of unbonded flexible riser with composite armor layers under coupling loads10.1016/j.oceaneng.2021.109907 ↗
29. Alternative analytical and finite element models for unbonded flexible pipes under axisymmetric loads10.1016/j.oceaneng.2021.108766 ↗
30. Mechanical analysis of unbonded flexible pipe tensile armor under combined loads10.1016/j.ijpvp.2019.02.015 ↗
31. Finite element investigation on the tensile armor wire response of flexible pipe for axisymmetric loading conditions using an implicit solver10.1115/1.4039132 ↗
32. Experimental and numerical study of structural behavior of a flexible riser model10.1016/j.apor.2017.07.003 ↗
33. Failure characteristic analysis of tensile armour layer of unbonded flexible riser under axial compression10.1080/17445302.2018.1564537 ↗
34. Some further studies on the axial-torsional behavior of flexible risers10.1115/1.4025541 ↗
35. Local structural analysis of flexible pipes subjected to traction, torsion and pressure loads10.1016/j.marstruc.2015.03.004 ↗
36. A case study in the cross-section analysis of flexible risers10.1016/0951-8339(95)00035-6 ↗
37. Fatigue testing and theoretical studies of two 4 in flexible pipes10.1016/0141-0296(95)00026-4 ↗