journal article·2024-06-04Open access

Crosslinked Polydiallyldimethylammonium Chloride Adsorbent for the Selective Separation of Rhenium Ions from Pregnant Leach Solutions

Mohammadbagher Fathi, Mehdi Mahmoudian, Richard Diaz Alorro, Mostafa Chegini

Materials· Volume 17· Issue 11

Abstract

The depletion of valuable mineral reserves has rendered effluents generated from mining and industrial processing activities a promising resource for the production of precious elements. The synthesis and improvement of new adsorbents to extract valuable compounds from industrial wastes and pregnant leach solutions, besides increasing wealth, can play a significant role in reducing environmental concerns. In this work, a new and low-cost adsorbent for the selective extraction of rhenium (perrhenate ions, ReO4−) was synthesized by the free-radical polymerization (FRP) of a diallyl dimethylammonium chloride monomer (quaternary amine) in the presence of a crosslinker. Various methods were employed to characterize the polymeric adsorbent. The results revealed that the designed polymeric adsorbent had a high surface area and pores with nano-metric dimensions and a pore volume of 6.4 × 10−3 cm3/g. Four environments—single, binary, multicomponent, and real solutions—were applied to evaluate the adsorbent’s performance in the selective separation of Re. Additionally, these environments were used to understand the behavior of molybdenum ions, the primary competitors of perrhenate ions in the ion exchange process. In competitive conditions, using variations in qe,mix/qe, an antagonism phenomenon (qe,mix/qe < 1) occurred due to the inhibitory effect of surface-adsorbed molybdenum ions on the binding of the perrhenate ions. However, across all conditions, the separation values for Re were higher than those for the other studied elements (Mo, Cu, Fe).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Chemical Synthesis and Characterization · Extraction and Separation Processes · Radioactive element chemistry and processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Ore Deposit and Earth Sciences (CODES), University of Tasmania, Hobart, TAS 7001, Australia

Department of Mining Engineering, Faculty of Engineering, Urmia University, Urmia 57561-51818, Iran

Department of Nanotechnology, College of Science, Urmia University, Urmia 57561-51818, Iran

Nanotechnology Research Institute, Urmia University, Urmia 57561-51818, Iran

Western Australian School of Mines: Minerals, Energy and Chemical Engineering, Curtin University, Kalgoorlie, WA 6430, Australia

Mineral Processing Laboratory Expert, Amirkabir University of Technology, Tehran 15825-4413, Iran

References (35)

Show source-provided references
1. Pan, J., Gao, B., Guo, K., Gao, Y., Xu, X., and Yue, Q. (2022). Insights into selective adsorption mechanism of copper and zinc ions onto biogas residue-based adsorbent: Theoretical calculation and electronegativity difference. Sci. Total Environ., 805.10.1016/j.scitotenv.2021.150413 ↗
2. Zhang, Q., Huang, R., Yao, H., Lu, X., Yan, D., and Xin, J. (2021). Removal of Zn2+ from polyethylene terephthalate (PET) glycolytic monomers by sulfonic acid cation exchange resin. J. Environ. Chem. Eng., 9.10.1016/j.jece.2021.105326 ↗
3. Comparative study of the application of chelating resins for rare earth recovery10.1016/j.hydromet.2017.02.006 ↗
4. Synthesis and characterization of modified resins and their selective sorption towards rhenium from binary (Re & Mo) solutions
5. Mohebbi, A., Abolghasemi Mahani, A., and Izadi, A. (2019). Applications of Ion Exchange Materials in Chemical and Food Industries, Springer.
6. Zhang, S., Ning, S., Liu, H., Wang, X., Wei, Y., and Yin, X. (2021). Preparation of ion-exchange resin via in-situ polymerization for highly selective separation and continuous removal of palladium from electroplating wastewater. Sep. Purif. Technol., 258.10.1016/j.seppur.2020.117670 ↗
7. Badsha, M.A., Khan, M., Wu, B., Kumar, A., and Lo, I.M. (2021). Role of surface functional groups of hydrogels in metal adsorption: From performance to mechanism. J. Hazard. Mater., 408.10.1016/j.jhazmat.2020.124463 ↗
8. Functionalization of polymers and nanomaterials for water treatment, food packaging, textile and biomedical applications: A review10.1007/s10311-020-01089-4 ↗
9. Burdzy, K., Chen, Y.-G., Lv, G.-Y., Chen, S.-H., and Kołodyńska, D. (2022). Application of Ion Exchangers with the N-Methyl-D-Glucamine Groups in the V (V) Ions Adsorption Process. Materials, 15.10.3390/ma15031026 ↗
10. Shen, L., Tesfaye, F., Li, X., Lindberg, D., and Taskinen, P. (2021). Review of rhenium extraction and recycling technologies from primary and secondary resources. Miner. Eng., 161.10.1016/j.mineng.2020.106719 ↗
11. Superior adsorption of Re (VII) by anionic imprinted chitosan-silica composite: Adsorption performance, selectivity and mechanism study10.1016/j.jiec.2022.01.013 ↗
12. Rhenium and its smelting and recycling technologies10.1177/09506608241229042 ↗
13. Investigation of the sorption method of processing molybdenum-containing raw materials to extract rare metals10.1051/e3sconf/202340103045 ↗
14. Ion exchange recovery of rhenium from industrially relevant sulfate solutions: Single column separations and modeling10.1016/j.hydromet.2015.09.026 ↗
15. Recovery of rhenium from copper leach solution by ion exchange10.1016/j.hydromet.2012.05.008 ↗
16. Regularities of rhenium and uranium sorption from mixed solutions with weakly basic anion exchange resin10.1080/08827508.2015.1039165 ↗
17. Recovery of ReO4− by weakly basic anion exchangers: Modeling of sorption equilibrium and rate10.1016/j.seppur.2015.08.031 ↗
18. Recovery of rhenium from copper leach solutions using ion exchange with weak base resins10.1016/j.hydromet.2017.08.002 ↗
19. Adsorption of rhenium (VII) on 4-amino-1, 2, 4-triazole resin10.1016/j.hydromet.2007.10.011 ↗
20. Separation of Re (VII) from Mo (VI) by anion exchange resins synthesized using microwave heat10.1016/j.hydromet.2019.01.013 ↗
21. Experimental review of microwave-assisted methods for synthesis of functional resins for sorption of rhenium (vii)10.1080/07366299.2018.1496603 ↗
22. Guo, X., Ma, Z., Li, D., Tian, Q., and Xu, Z. (2019). Recovery of Re (VII) from aqueous solutions with coated impregnated resins containing ionic liquid Aliquat 336. Hydrometallurgy, 190.10.1016/j.hydromet.2019.105149 ↗
23. Zawierucha, I., Nowik-Zajac, A., Girek, T., Lagiewka, J., Ciesielski, W., Pawlowska, B., and Biczak, R. (2022). Arsenic (V) removal from water by resin impregnated with cyclodextrin ligand. Processes, 10.10.3390/pr10020253 ↗
24. Do adsorbent pore size and specific surface area affect the kinetics of methyl orange aqueous phase adsorption?
25. Active Surfaces Formed in Liquid Crystal Polymer Networks10.1021/acsami.1c21024 ↗
26. Diffusion of hydrophilic organic micropollutants in granular activated carbon with different pore sizes10.1016/j.watres.2019.06.012 ↗
27. Mechanism and equilibrium modeling of Re and Mo adsorption on a gel type strong base anion resin10.1134/S1070427217080208 ↗
28. Adsorption of Scandium and Yttrium from Aqueous Solutions by Purolite C100Na Resin: Equilibrium and Kinetic Modeling
29. Atlas of Eh-pH diagrams
30. He, C., Qi, M., Liu, Y., Liu, Z., Wei, Y., Fujita, T., Wang, G., Ma, S., Yang, W., and Gan, J. (2024). Highly selective separation of germanium from sulfuric solution using an anion exchange D201× 7 resin with tartaric acid. Hydrometallurgy, 224.10.1016/j.hydromet.2023.106230 ↗
31. Adsorption of molybdate and tetrathiomolybdate onto pyrite and goethite: Effect of pH and competitive anions10.1016/j.chemosphere.2005.06.025 ↗
32. Chan, W.N., Warren, J.P., Krieger, S.P., Vestal, B.L., and Harrison, R.G. (2020). Separation and preconcentration of perrhenate from ionic solutions by ion exchange chromatography. J. Chromatogr. A, 1631.10.1016/j.chroma.2020.461588 ↗
33. Sorption of rhenium and uranium by strong base anion exchange resin from solutions with different anion compositions10.1016/j.hydromet.2012.11.003 ↗
34. Wang, J., and Guo, X. (2022). Rethinking of the intraparticle diffusion adsorption kinetics model: Interpretation, solving methods and applications. Chemosphere, 309.10.1016/j.chemosphere.2022.136732 ↗
35. Recovery of rhenium from molybdenite calcine by a resin-in-pulp process10.1016/j.hydromet.2006.03.007 ↗