Incorporation of Anions into Anodic Alumina—A New Track in Cr(VI) Anodizing Substitution?
Source abstract
Abstract
Aluminum technical alloys are well known for their outstanding mechanical properties, especially after heat treatment. However, quenching and aging, which improve the mechanical properties, by the formation of Cu-rich zones and phases that are coherent with the matrix and block the dislocation motion, cause uneven distribution of the elements in the alloy and consequently make it prone to corrosion. One method providing satisfactory corrosion protection of aluminum alloys is anodizing. On an industrial scale, it is usually carried out in electrolytes containing chromates that were found to be cancerogenic and toxic. Therefore, much effort has been undertaken to find substitutions. Currently, there are many Cr(VI)-free substitutes like tartaric–sulfuric acid anodizing or citric–sulfuric acid anodizing. Despite using such approaches even on the industrial scale, Cr(VI)-based anodizing still seems to be superior; therefore, there is an urge to find more complex but more effective approaches in anodizing. The incorporation of anions into anodic alumina from the electrolytes is a commonly known effect. Researchers used this phenomenon to entrap various other anions and organic compounds into anodic alumina to change their properties. In this review paper, the impact of the incorporation of various corrosion inhibitors into anodic alumina on the corrosion performance of the alloys is discussed. It is shown that Mo compounds are promising, especially when combined with organic acids.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Concrete Corrosion and Durability · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Materials Science and Engineering, Faculty of Advanced Technologies and Chemistry, Military University of Technology, 2 Kaliskiego Street, 00908 Warsaw, Poland
Funding
Polish National Agency for Academic Exchange · Polish National Science Centre
References (87)
Show source-provided references
1. Towards Cr(VI)-free anodization of aluminum alloys for aerospace adhesive bonding applications: A review10.1007/s11705-017-1641-3 ↗
2. United States Department of Labor OSHA (2006). Toxic and Hazardous Substances in Occupational Exposure to Hexavalent Chromium. Regulatory Standard 29 CFR 1910.1026 and 29 CFR 1926.1126 Federal Register Number, United States Department of Labor OSHA.
3. Regulation (EC) (1999). No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC 2006. Off. J., L396, 1–849.
4. Koop, R., and Moji, Y. (1992). Boric/Sulfuric Acid Anodize-Alternative to Chromic Acid Anodize, SAE International. SAE Technical Paper.10.4271/920944 ↗
5. Boric/Sulfuric Acid Anodizing of Aluminum Alloys 2024 and 7075: Film Growth and Corrosion Resistance10.5006/1.3283942 ↗
6. Anodizing of Aluminum in Sulfuric Acid/Boric Acid Mixed Electrolyte10.1149/2.032306jes ↗
7. The bonding strength and corrosion resistance of aluminum alloy by anodizing treatment in a phosphoric acid modified boric acid/sulfuric acid bath10.1016/j.surfcoat.2007.10.041 ↗
8. Anodising of Al 2024-T3 in a modified sulphuric acid/boric acid bath for aeronautical applications10.1016/S0010-938X(02)00082-3 ↗
9. Morphology perspective on chromic acid anodizing replacement by thin film sulfuric acid anodizing10.1016/j.surfcoat.2018.07.008 ↗
10. Mechanistic study of thin film sulfuric acid anodizing rate difference between Al2024 T3 and Al6061 T610.1016/j.surfcoat.2018.09.083 ↗
11. Effect of cerium (IV) on thin sulfuric acid anodizing of 2024-T3 alloy10.1016/j.jmrt.2021.09.117 ↗
12. Role of Tartaric Acid on the Anodizing and Corrosion Behavior of AA 2024 T3 Aluminum Alloy10.1149/1.3077602 ↗
13. Effects of tartaric acid on the structure and corrosion resistance for anodizing films of aerospace aluminium alloys10.1080/14328917.2023.2212486 ↗
14. Adhesion properties of tartaric sulfuric acid anodic films assessed by a fast and quantitative peel tape adhesion test10.1016/j.ijadhadh.2022.103156 ↗
15. Characterization of Tartaric-Sulphuric Acid Anodized 2024-T3 Aluminium Alloys with Anodizing Potential Variation10.1088/1742-6596/1204/1/012039 ↗
16. Corrosion Testing of Anodized Aerospace Alloys: Comparison Between Immersion and Salt Spray Testing using Electrochemical Impedance Spectroscopy10.1149/1945-7111/ab74e3 ↗
17. Anodising potential influence on well-ordered nanostructures formed by anodisation of aluminium in sulphuric acid10.1016/j.tsf.2005.12.094 ↗
18. Raffin, F., Echouard, J., and Volovitch, P. (2023). Influence of the Anodizing Time on the Microstructure and Immersion Stability of Tartaric-Sulfuric Acid Anodized Aluminum Alloys. Metals, 13.10.3390/met13050993 ↗
19. Synthesis of anodic aluminum oxide (AAO) at relatively high temperatures. Study of the influence of anodization conditions on the alumina structural features10.1016/j.surfcoat.2011.07.020 ↗
20. Cyclic oxidation processes during anodizing of Al–Cu alloys10.1016/j.electacta.2007.05.052 ↗
21. Studies on the sealing processes of corrosion resistant coatings formed on 2024 aluminium alloy with tartaric-sulfuric anodizing10.1016/j.surfcoat.2018.12.092 ↗
22. Assessment of the corrosion resistance of self-ordered anodic aluminum oxide (AAO) obtained in tartaric-sulfuric acid (TSA)10.1016/j.surfcoat.2020.126131 ↗
23. Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic Alumina10.1126/science.268.5216.1466 ↗
24. Cabral-Miramontes, J., Gaona-Tiburcio, C., Estupinán-López, F., Lara-Banda, M., Zambrano-Robledo, P., Nieves-Mendoza, D., Maldonado-Bandala, E., Chacón-Nava, J., and Almeraya-Calderón, F. (2020). Corrosion Resistance of Hard Coat Anodized AA 6061 in Citric–Sulfuric Solutions. Coatings, 10.10.3390/coatings10060601 ↗
25. Hybrid sol-gel coatings applied on anodized AA2024-T3 for active corrosion protection10.1016/j.surfcoat.2021.127251 ↗
26. Effect of titanium sol on sulfuric-citric acids anodizing of 7150 aluminum alloy10.1016/j.surfin.2020.100479 ↗
27. The effect of different carboxylic acids on the sulfuric acid anodizing of AA202410.1016/j.surfcoat.2019.125283 ↗
28. Corrosion-Resistant Porous Alumina Formed via Anodizing Aluminum in Etidronic Acid and Its Pore-Sealing Behavior in Boiling Water10.1149/2.0221912jes ↗
29. Surface and Electrochemical Characteristics of Novel Chromate-Free Mn-V Oxyanion Sealed Tartaric–Sulfuric Acid Anodized Coating10.1007/s11665-018-3648-4 ↗
30. Fabrication of Anodic Nanoporous Alumina via Acetylenedicarboxylic Acid Anodizing10.1149/2.0071407eel ↗
31. Nanostructural characterization of large-scale porous alumina fabricated via anodizing in arsenic acid solution10.1016/j.apsusc.2017.01.243 ↗
32. Manufacturing of highly ordered porous anodic alumina with conical pore shape and tunable interpore distance in the range of 550 nm to 650 nm
33. Morphological and chemical characterization of highly ordered conical-pore anodic alumina prepared by multistep citric acid anodizing and chemical etching process10.1007/s10934-017-0419-9 ↗
34. Fabrication of anodic porous alumina via anodizing in cyclicoxocarbon acids10.1016/j.apsusc.2014.05.204 ↗
35. Growth behavior of anodic oxide formed by aluminum anodizing in glutaric and its derivative acid electrolytes10.1016/j.apsusc.2014.10.014 ↗
36. Zajączkowska, L., and Norek, M. (2021). Peculiarities of Aluminum Anodization in AHAs-Based Electrolytes: Case Study of the Anodization in Glycolic Acid Solution. Materials, 14.10.3390/ma14185362 ↗
37. Zajączkowska, L., Siemaszko, D., and Norek, M. (2020). Towards Self-Organized Anodization of Aluminum in Malic Acid Solutions—New Aspects of Anodization in the Organic Acid. Materials, 13.10.3390/ma13173899 ↗
38. Growth behavior of anodic porous alumina formed in malic acid solution10.1016/j.apsusc.2013.08.044 ↗
39. Photoluminescent behavior of heat-treated porous alumina films formed in malonic acid10.1016/j.apsusc.2009.09.038 ↗
40. Behavior of acid species during heat treatment and re-anodizing of porous alumina films formed in malonic acid10.1007/s10008-008-0765-2 ↗
41. Poznyak, A., Knörnschild, G., Karoza, A., Norek, M., and Pligovka, A. (2021). Peculiar Porous Aluminum Oxide Films Produced via Electrochemical Anodizing in Malonic Acid Solution with Arsenazo-I Additive. Materials, 14.10.3390/ma14175118 ↗
42. Self-ordered porous alumina fabricated via phosphonic acid anodizing10.1016/j.electacta.2015.12.162 ↗
43. Self-Ordered Aluminum Anodizing in Phosphonoacetic Acid and Its Structural Coloration10.1149/2.0021508ssl ↗
44. Influence of sub-10 nm anodic alumina nanowire morphology formed by two-step anodizing aluminum on water wettability and slipping behavior10.1016/j.apsusc.2021.149090 ↗
45. Advancing and receding contact angle investigations for highly sticky and slippery aluminum surfaces fabricated from nanostructured anodic oxide10.1039/C8RA07712F ↗
46. Nakajima, D., Kikuchi, T., Yoshioka, T., Matsushima, H., Ueda, M., Suzuki, R.O., and Natsui, S. (2019). A Superhydrophilic Aluminum Surface with Fast Water Evaporation Based on Anodic Alumina Bundle Structures via Anodizing in Pyrophosphoric Acid. Materials, 12.10.3390/ma12213497 ↗
47. Optimum Exploration for the Self-Ordering of Anodic Porous Alumina Formed via Selenic Acid Anodizing10.1149/2.0391510jes ↗
48. Self-Ordering Behavior of Anodic Porous Alumina via Selenic Acid Anodizing10.1016/j.electacta.2014.06.078 ↗
49. Rapid fabrication of self-ordered porous alumina with 10-/sub-10-nm-scale nanostructures by selenic acid anodizing10.1038/srep02748 ↗
50. Fabrication of Anodic Porous Alumina by Squaric Acid Anodizing10.1016/j.electacta.2013.12.186 ↗
51. Effects of a magnetic field on growth of porous alumina films on aluminum10.1016/j.electacta.2010.02.066 ↗
52. The characterization of anodic aluminas. I. Composition of films from acidelectrolytes10.1149/1.2423895 ↗
53. The Characterization of Anodic Aluminas: II. Effect of Anodizing Temperature on Coatings from Aliphatic Dicarboxylic Electrolytes10.1149/1.2423896 ↗
54. Glancing Angle studies of oxide films10.1016/0010-938X(90)90097-O ↗
55. Nature of the carboxylate species incorporated in anodic alumina films formed in oxalic acid solution10.1016/0040-6090(83)90099-8 ↗
56. Chemical analysis of a single basic cell porous anodic aluminium oxide templates
57. Study of aluminium in sulphuric and chromic acid solutions—I kinetics of growth and composition of oxides10.1016/0013-4686(90)90027-W ↗
58. Optical properties of thin anodic alumina membranes formed in a solution of tartaric acid10.1016/j.tsf.2014.01.074 ↗
59. Porous anodic alumina: Fabrication, characterization and applications10.1016/S0040-6090(96)09440-0 ↗
60. Unveiling the origin of photoluminescence in nanoporous anodic alumina (NAA) obtained by constant current regime10.1016/j.jlumin.2018.10.015 ↗
61. The effect of anodization temperature on optical properties of nanoporous anodic alumina (NAA) films10.1016/j.jelechem.2016.01.009 ↗
62. Fabrication of anodic aluminum oxide with incorporated chromate ions10.1016/j.apsusc.2012.07.043 ↗
63. Self-Ordering of Porous Anodic Alumina Fabricated by Anodizing in Chromic Acid at High Temperature10.1149/1945-7111/ac2101 ↗
64. Effects of Electrolyte Species and Their Combination on Film Structures and Dielectric Properties of Crystalline Anodic Alumina Films Formed by Two-Step Anodization10.2320/matertrans.L-M2013826 ↗
65. Variation of the refractive index by means of sulfate anion incorporation into nanoporous anodic aluminum oxide films10.1016/j.micromeso.2015.12.011 ↗
66. Perfect two-dimensional porous alumina photonic crystals with duplex oxide layers10.1063/1.1609033 ↗
67. In Situ Determination of the Pore Opening Point during Wet-Chemical Etching of the Barrier Layer of Porous Anodic Aluminum Oxide: Nonuniform Impurity Distribution in Anodic Oxide10.1021/am400520d ↗
68. Formation of a black anodic coating on alloy AA5052 by using anodizing in a tri-acid environmentally friendly electrolyte10.1016/j.matchemphys.2024.129124 ↗
69. Incorporation of copper chelate ions into anodic alumina walls10.1016/j.matlet.2013.05.016 ↗
70. In-situ electrochemical doping of nanoporous anodic aluminum oxide with indigo carmine organic dye10.1016/j.tsf.2015.11.084 ↗
71. Aluminum Anodizing in an Aqueous Solution of Formic Acid with Ammonium Heptamolybdate Additive10.1149/1945-7111/acb019 ↗
72. Effect of Oxalic Acid Additives on Aluminum Anodizing in Formic Acid Containing Ammonium Heptamolybdate10.1149/1945-7111/ad0513 ↗
73. In-situ growth of cerium nanoparticles for chrome-free, corrosion resistant anodic coatings10.1016/j.surfcoat.2021.126958 ↗
74. Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Cecontaining solutions at different temperatures: Corrosion behaviour and Ce ions distribution
75. Corrosion behavior of 2024 aluminum alloy anodized in presence of permanganate and phosphate ions10.1007/s11998-012-9459-x ↗
76. Sadler, B.A. (2013). Corrosion behavior of 2024 aluminum alloy anodized in sulfuric acid containing inorganic inhibitor. Light Metals 2013. The Minerals, Metals & Materials Series, Springer.10.1002/9781118663189 ↗
77. EIS characterisation of anodic films formed on 2024 aluminium alloy, in sulphuric acid containing molybdate or permanganate species10.1016/j.corsci.2004.06.019 ↗
78. Corrosion behaviour of 7075 aluminium alloy in acidic solution10.1039/D0RA04215C ↗
79. Corrosion Inhibition of Aluminum Alloy 2024-T3 by Sodium Molybdate10.1149/2.044403jes ↗
80. An electrochemical approach to the anodic oxidation of Al 2024 alloy in sulfuric acid containing inhibitors10.1016/S0257-8972(02)00414-0 ↗
81. Electrochemical characterisation of anodic oxidation films formed in presence of corrosion inhibitors10.1016/S0169-4332(01)00364-6 ↗
82. Molybdate/sulfuric acid anodising of 2024-aluminium alloy: Influence of inhibitor concentration on film growth and on corrosion resistance10.1016/S0257-8972(03)00511-5 ↗
83. Influence of molybdate species added to sulphuric acid on composition and morphology of the anodic layers formed on 2024 aluminium alloy10.1016/j.tsf.2004.12.020 ↗
84. Characterisation of the anodic layers formed on 2024 aluminium alloy, in tetraborate electrolyte containing molybdate ions10.1016/j.apsusc.2005.03.124 ↗
85. Influence of molybdate species on the tartaric acid/sulphuric acid anodic films grown on AA2024 T3 aerospace alloy10.1016/j.corsci.2009.05.034 ↗
86. Addition of molybdate ions to the anodizing bath to improve the corrosion resistance of clad 2024-T3 alloy anodized in tartaric-sulfuric acid10.1016/j.surfcoat.2024.130682 ↗
87. Study on the superhydrophilic modification and enhanced corrosion resistance method of aluminum alloy distillation desalination tubes10.1016/j.surfcoat.2022.128770 ↗