Analysis of the Impact of Waste Fly Ash on Changes in the Structure and Thermal Properties of the Produced Recycled Materials Based on Polyethylene
Source abstract
Abstract
This paper presents the results of the research on the structure and thermal properties of materials made from fly ash based on high-density polyethylene (HDPE). Composites based on a polyethylene matrix with 5, 10, and 15 wt% fly ash from hard coal combustion content were examined. Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) was used to identify characteristic functional groups present in the chemical structure of polyethylene and the composites based on its matrix. Structural analysis was performed using X-ray diffraction (XRD), a differential scanning calorimeter (DSC), and microscopic examinations. Mechanical properties were also examined. Analysis of the thermal effect values determined by the DSC technique, XRD, and FTIR-ATR allowed the evaluation of the crystallinity of the tested materials. Polyethylene is generally considered to be a two-phase system consisting of crystalline and amorphous regions and is a plastic characterized by a significant crystalline phase content. Based on the FTIR-ATR spectra, DSC curves, and XRD, the effect of the filler and the changes occurring in the materials studied resulted in a decrease in the degree of crystallinity and a change in the melting point and crystallization temperature of the polymer matrix were established. Microscopic examinations were carried out to analyze the microstructure of the composites to collect information on the distribution and shape of the filler particles, indicating their size and distribution in the polymer matrix. Furthermore, the use of scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM-EDS) allowed for the microanalysis of the chemical composition of the filler particles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Flame retardant materials and properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, 42-201 Czestochowa, Poland
Department of Technology and Automation, Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, 42-201 Czestochowa, Poland
References (54)
Show source-provided references
1. Golewski, G.H. (2019). Beton Modyfikowany Popiołem Lotnym Krzemionkowym Poddany Ekspozycji Niskich Temperatur, WPL. (In Polish).
2. Smołka-Danielowska, D., Jabłońska, M., and Godziek, S. (2021). The Influence of Hard Coal Combustion in Individual Household Furnaces on the Atmosphere Quality in Pszczyna (Poland). Minerals, 11.10.3390/min11111155 ↗
3. (2009). Fly Ash for Concrete—Part 1: Definition, Specifications and Conformity Criteria (Standard No. EN 450-1:2009).
4. Fly ash used as a reinforcing and flame-retardant filler in low-density polyethylene
5. Warunki zastosowania popiołu lotnego jako wypełniacza do mieszanek mineralno–asfaltowych10.35784/bud-arch.1938 ↗
6. Możliwość wykorzystania w górnictwie ubocznego produktu spalania pochodzącego z energetyki stosującej wegiel brunatny
7. The possibility of the use of secondary raw materials from energy and iron&steel industries for glass-ceramics production
8. Ocena możliwości wykorzystania popiołów ze spalania biomasy w rekultywacji biologicznej10.15584/pjsd.2020.24.2.7 ↗
9. Utilization of post coal waste composites and fly ash for levee construction
10. Synteza zeolitów z popiołów i żużli ze spalarni odpadów
11. Preparation and characterization of coal fly ash reinforced polymer composites: An overview10.3144/expresspolymlett.2022.54 ↗
12. Caban, R., and Gnatowski, A. (2023). Structural and Thermal Examinations of Polyamide Modified with Fly Ash from Biomass Combustion. Materials, 16.10.3390/ma16155277 ↗
13. Sun, Q., Zhao, S., Zhao, X., Song, Y., Ban, X., and Zhang, N. (2023). Influence of different grinding degrees of fly ash on properties and reaction degrees of geopolymers. PLoS ONE, 18.10.1371/journal.pone.0282927 ↗
14. Poly(ethylene terephthalate) composite material with modified fly ash filler
15. Biomass fly ash as nanofiller to improve the dielectric properties of low-density polyethylene for possible high-voltage applications10.1016/j.heliyon.2023.e23350 ↗
16. Porcino, D.D., Mauriello, F., Bonaccorsi, L., Tomasello, G., Paone, E., and Malara, A. (2020). Recovery of Biomass Fly Ash and HDPE in Innovative Synthetic Lightweight Aggregates for Sustainable Geotechnical Applications. Sustainability, 12.10.3390/su12166552 ↗
17. Porcino, D.D., Tomasello, G., Mauriello, F., and Malara, A. (2023). Environmental and geotechnical properties of lightweight aggregates made of reused solid wastes. Environ. Geotech.10.1680/jenge.22.00077 ↗
18. Mohd Nasir, N.H., Usman, F., Woen, E.L., Ansari, M.N.M., and Supian, A.B.M. (2023). Saloma S. Microstructural and Thermal Behaviour of Composite Material from Recycled Polyethylene Terephthalate and Fly Ash. Recycling, 8.10.3390/recycling8010011 ↗
19. Brammer, S. (2021). Injection Molding Advanced Troubleshooting Guide, Hanser Publications.
20. Kim, M., and Lee, C.H. (2023). Hydrogenation of High-Density Polyethylene during Decompression of Pressurized Hydrogen at 90 MPa: A Molecular Perspective. Polymers, 15.10.3390/polym15132880 ↗
21. High-density polyethylene crystals with double melting peaks induced by ultra-high-molecular weight polyethylene fibre10.1098/rsos.180394 ↗
22. Alghamdi, M.N. (2021). Effect of Filler Particle Size on the Recyclability of Fly Ash Filled HDPE Composites. Polymers, 13.10.3390/polym13162836 ↗
23. Diesel-induced transparency of plastically deformed high-density polyethylene10.1007/s10853-019-03700-8 ↗
24. (1979). Tworzywa Sztuczne. Oznaczanie Cech Wytrzymałosciowych Przy Satycznym Zgienaniu (Standard No. PN-79/C-89027).
25. A study of structure and mechanical properties of welded joints in polyethylene pipes10.1016/j.msea.2005.12.019 ↗
26. In situ x-ray diffraction of high density polyethylene during dynamic drive: Polymer chain compression and decomposition10.1063/5.0057439 ↗
27. Pectin-organophilized ZnO nanoparticles as sustainable fillers for high-density polyethylene composites10.1016/j.ijbiomac.2021.05.133 ↗
28. Classifying condition of ultra-high-molecular-weight polyethylene ropes with wide-angle X-ray scattering10.1016/j.polymertesting.2022.107524 ↗
29. Stress-strain behavior and corresponding crystalline structures of four types of polyethylene under a wide range of strain rates10.1016/j.polymertesting.2021.107460 ↗
30. Effect of phase transitions on the electrical properties of polymer/carbon nanotube and polymer/graphene nanoplatelet composites with different conductive network structures10.1002/pi.5502 ↗
31. Monoclinic polyethylene revisited10.1016/S0032-3861(96)00643-X ↗
32. Deformation of high density polyethylene by dynamic equal-channel-angular pressing
33. Characterization and ballistic performance of hybrid jute and aramid reinforcing graphite nanoplatelets in high-density polyethylene nanocomposites10.1016/j.jmrt.2023.12.093 ↗
34. Industrially viable technique for the preparation of HDPE/fly ash composites at high loading: Thermal, mechanical, and rheological interpretations10.1002/app.45995 ↗
35. Kar, K.K. (2022). Handbook of Fly Ash, Butterworth-Heinemann.
36. Morphology and chemical composition of mineral matter present in fly ashes of bituminous coal and lignite10.1007/s13762-020-03016-0 ↗
37. Cząstki węglowe w popiołach lotnych ze spalania węgla z polskich złóż
38. Fabrication, characterization and gamma rays shielding properties of nano and micro lead oxide-dispersed-high density polyethylene composites10.1016/j.radphyschem.2017.10.017 ↗
39. Qualitative Analysis of High Density Polyethylene Using FTIR Spectroscopy
40. Polyethylene characterization by FTIR10.1016/S0142-9418(01)00124-6 ↗
41. Cosnita, M., Balas, M., and Cazan, C. (2022). The Influence of Fly Ash on the Mechanical Properties of Water Immersed All Waste Composites. Polymers, 14.10.3390/polym14101957 ↗
42. Struktura składników popiołów lotnych o różnej granulacji
43. FTIR-ATR spectroscopic, thermal and microstructural studies on poypropylene-glass fiber composites10.1016/j.molstruc.2022.133181 ↗
44. Nowak, A., Lubas, M., Jasiński, J.J., Szumera, M., Caban, R., Iwaszko, J., and Koza, K. (2022). Effect of dolomite addition on the structureand properties of multicomponent amphibolite glasses. Materials, 14.10.3390/ma15144870 ↗
45. Surface chemistry changes and microstructure evaluation of low density nanocluster polyethylene under natural weathering: A spectroscopic investigation10.1088/1742-6596/984/1/012010 ↗
46. Structural depth profiling in polyethylene films by multiple internal reflection infra-red spectroscopy10.1016/0032-3861(89)90269-3 ↗
47. Calculation of the degree of crystallinity of HDPE/GNPs nanocomposites by using various experimental techniques: A comparative study10.1007/s10853-022-08125-4 ↗
48. Surface chemistry changes of weathered HDPE/wood-flour composites studied by XPS and FTIR spectroscopy10.1016/j.polymdegradstab.2003.11.002 ↗
49. Zaccardi, F., Toto, E., Rastogi, S., La Saponara, V., Santonicola, M.G., and Laurenzi, S. (2023). Impact of Proton Irradiation on Medium Density Polyethylene/Carbon Nanocomposites for Space Shielding Applications. Nanomaterials, 13.10.3390/nano13071288 ↗
50. Development of value-added composites from recycled high-density polyethylene, jute fiber and fly ash cenospheres: Mechanical, dynamic mechanical and thermal properties10.1007/s12588-018-9211-1 ↗
51. High density polyethylene/cenosphere composites reinforced with multi-walled carbon nanotubes: Mechanical, thermal and fire retardancy studies10.1016/j.matdes.2014.08.076 ↗
52. Skład materii organicznej i nieorganicznej krzemionkowych popiołów lotnych, jako element ich przydatności w technologiach materiałów budowlanych
53. Structure-fracture properties relationship for Polypro-pylene reinforced with fly ash with and without maleic anhydride functionalized isotactic Polypropylene as coupling agent10.1016/j.matdes.2013.09.055 ↗
54. Charakterystyka popiołów lotnych ze spalania niektórych węgli kamiennych i brunatnych