journal article·2024-08-11Open access

Formability Prediction Using Machine Learning Combined with Process Design for High-Drawing-Ratio Aluminum Alloy Cups

Yeong-Maw Hwang, Tsung-Han Ho, Yung-Fa Huang, Ching-Mu Chen

Materials· Volume 17· Issue 16

Abstract

Deep drawing has been practiced in various manufacturing industries for many years. With the aid of stamping equipment, materials are sheared to different shapes and dimensions for users. Meanwhile, through artificial intelligence (AI) training, machines can make decisions or perform various functions. The aim of this study is to discuss the geometric and process parameters for A7075 in deep drawing and derive the formable regions of sound products for different forming parameters. Four parameters—forming temperature, punch speed, blank diameter and thickness—are used to investigate their effects on the forming results. Through finite element simulation, a database is established and used for machine learning (ML) training and validation to derive an AI prediction model. Importing the forming parameters into this prediction model can obtain the forming results rapidly. To validate the formable regions of sound products, several experiments are conducted and the results are compared with the prediction results to verify the feasibility of applying ML to deep drawing processes of aluminum alloy A7075 and the reliability of the AI prediction model.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-sen University, Kaohsiung 80424, Taiwan

Department of Information and Communication Engineering, Chaoyang University of Technology, Taichung 413310, Taiwan

Department of Electrical Engineering, National Penghu University of Science and Technology, Magong 88046, Taiwan

Funding

National Science and Technology Council of Taiwan

References (23)

Show source-provided references
1. Deep drawing process: Analysis and experiment10.1016/S0924-0136(02)00253-4 ↗
2. Mechanical and Anisotropic Behaviors of 7075 Aluminum Alloy Sheets10.1016/j.matdes.2010.09.001 ↗
3. Comparative hot workability of 7012 and 7075 alloys after different pretreatments10.1016/0921-5093(94)09714-3 ↗
4. Chen, D.C., Guo, J.Y., Li, C.Y., Lai, Y.Y., and Hwang, Y.M. (2019, January 18–21). Study of circular and square aluminum alloy deep drawing. Proceedings of the 9th International Conference on Tube Hydroforming (TUBEHYDRO 2019), Kaohsiung, Taiwan.
5. Simulation of the Effect of Die Radius on Deep Drawing Process
6. Fault prediction of bearings based on LSTM and statistical process analysis10.1016/j.ress.2021.107646 ↗
7. A comparative analysis of K-nearest neighbor, genetic, support vector machine, decision tree, and long short-term memory algorithms in machine learning10.1016/j.dajour.2022.100071 ↗
8. Singh, A., and Kumar, R. (2020, January 14–15). Heart disease prediction using machine learning algorithms. Proceedings of the 2020 IEEE International Conference on Electrical and Electronics Engineering (ICE3), Gorakhpur, India.10.1109/ICE348803.2020.9122958 ↗
9. Huang, Y.-F., Lin, C.-B., Chung, C.-M., and Chen, C.-M. (2021). Research on QoS Classification of Network Encrypted Traffic Behavior Based on Machine Learning. Electronics, 10.10.3390/electronics10121376 ↗
10. Cheng, C., Hsiao, C., Huang, Y.-F., and Li, H. (2023). Combining Classifiers for Deep Learning Mask Face Recognition. Information, 14.10.3390/info14070421 ↗
11. Machine learning-based indoor positioning systems using multi-channel information10.5614/j.eng.technol.sci.2023.55.4.2 ↗
12. Reduction of Defect Rate in Impact Extrusion by Slide Motion Control Using Machine Learning10.9773/sosei.64.87 ↗
13. Unsupervised anomaly detection in pressurized water reactor digital twins using autoencoder neural networks10.1016/j.nucengdes.2023.112502 ↗
14. Data Scientific Application to Numerical Material Test for Sheet Metals
15. DEFORM (2024, May 18). DEFORM manual, v11.0.2_System_Documentation, Scientific Forming Technologies Corporation (SFTC), Columbus, Ohio 43235, USA. Available online: https://www.deform.com/.
16. Cockcroft-Latham ductile fracture criteria for nonferrous materials10.4028/www.scientific.net/MSF.782.373 ↗
17. Correlation between Engineering Stress-Strain and True Stress-Strain Curve
18. Damage evolution of 7075 aluminum alloy basing the Gurson Tvergaard Needleman model under high temperature conditions10.1016/j.jmrt.2021.11.153 ↗
19. Evaluation of Limiting Drawing Ratio (LDR) in Deep Drawing Process10.12776/ams.v21i4.642 ↗
20. Machine learning classifiers and fMRI: A tutorial overview10.1016/j.neuroimage.2008.11.007 ↗
21. Russell, S.J., and Norvig, P. (2009). Artificial Intelligence: A Modern Approach, Pearson.
22. Performance Analysis of Text Classification Algorithms using Confusion Matrix
23. The meaning and use of the area under a receiver operating characteristic (ROC) curve10.1148/radiology.143.1.7063747 ↗