article·2024-08-28Open access

Effect of Extrusion Process on Microstructure, Corrosion Properties, and Mechanical Properties of Micro-Alloyed Mg–Zn–Ca–Zr Alloy

Zemin Yu, Wenxin Hu, Zhiqiang Chen, Lei Shi, Lei Yang, Jianfeng Jin, Erlin Zhang

Abstract

The effect of the extrusion process on the microstructure, corrosion, and mechanical properties of Mg-Zn-Ca-Zr alloy has been investigated. Zn and Ca were both in a solid solution and only the Zr-rich phase was observed in the homogenized and extruded alloys. The Zr-rich phase was obviously refined after extrusion. The corrosion rate of the homogenized alloy decreased by about 25% after extrusion. This is because the refined Zr-rich phase was easier to cover with the deposited corrosion products, which reduced the cathodic reaction activity of the Zr-rich phase. The corrosion rate is similar for the alloys extruded at 320 °C and 350 °C since the size and distribution of the Zr-rich phase were not different in the two conditions. The alloy extruded at 320 °C has a smaller grain size and better comprehensive mechanical properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.