journal article·2024-09-20Open access

Utilization of Municipal Solid Waste Incineration (MSWIFA) in Geopolymer Concrete: A Study on Compressive Strength and Leaching Characteristics

Qiyong Xu, Ning Shang, Jae Hac Ko

Materials· Volume 17· Issue 18

Abstract

This study explores the utilization of municipal solid waste incineration fly ash (MSWIFA) in geopolymer concrete, focusing on compressive strength and heavy metal leachability. MSWIFA was sourced from a Shenzhen waste incineration plant and pretreated by washing to remove soluble salts. Geopolymer concrete was prepared incorporate with washed or unwashed MSWIFA and tested under different pH conditions (2.88, 4.20, and 10.0). Optimal compressive strength was achieved with a Si/Al ratio of 1.5, water/Na ratio of 10, and sand-binder ratio of 0.6. The washing pretreatment significantly enhanced compressive strength, particularly under alkaline conditions, with GP-WFA (washed MSWIFA) exhibiting a 49.6% increase in compressive strength, compared to a 21.3% increase in GP-FA (unwashed MSWIFA). Additionally, GP-WFA’s compressive strength reached 41.7 MPa, comparable to that of the control (GP-control) at 43.7 MPa. Leaching tests showed that acidic conditions (pH 2.88) promoted heavy metal leaching, which increased over the leaching time, while an alkaline environment significantly reduced the leachability of heavy metals. These findings highlight the potential of using washed MSWIFA in geopolymer concrete, promoting sustainable construction practices, particularly in alkaline conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Shenzhen Engineering Laboratory for Eco-Efficient Recycled Materials, School of Environment and Energy, Peking University Shenzhen Graduate School, University Town, Xili, Nanshan District, Shenzhen 518055, China

Department of Environmental Engineering, Jeju National University, 102 Jejudaehak-ro, Jeju-si 63243, Jeju, Republic of Korea

Funding

Korea Ministry of Environment

References (75)

Show source-provided references
1. Degradation technologies and mechanisms of dioxins in municipal solid waste incineration fly ash: A review10.1016/j.jclepro.2019.119507 ↗
2. Stabilization of heavy metals in MSWI fly ash using silica fume10.1016/j.wasman.2014.08.027 ↗
3. Basic characteristics of leachate produced by various washing processes for MSWI ashes in Taiwan10.1016/j.jenvman.2012.03.008 ↗
4. Municipal solid waste (MSW) incineration fly ash as an important source of heavy metal pollution in China10.1016/j.envpol.2019.04.082 ↗
5. Preparation of functional geopolymers from municipal solid waste incineration fly ash: An approach combining experimental and computational simulation studies10.1016/j.jenvman.2024.120226 ↗
6. Synthesis and application of geopolymers from municipal waste incineration fly ash (MSWI FA) as raw ingredient—A review10.1016/j.resconrec.2022.106308 ↗
7. Synthesis of geopolymers using municipal solid waste incineration fly ash and construction and demolition waste: Mechanical and thermal activation10.1016/j.jece.2023.111249 ↗
8. Lu, N., Ran, X., Pan, Z., and Korayem, A.H. (2022). Use of Municipal Solid Waste Incineration Fly Ash in Geopolymer Masonry Mortar Manufacturing. Materials, 15.10.3390/ma15238689 ↗
9. The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications10.1016/S0892-6875(97)00046-0 ↗
10. Microstructural Evidence of Reconstituted Limestone Blocks in the Great Pyramids of Egypt10.1111/j.1551-2916.2006.01308.x ↗
11. Davidovits, J. (2008). Geopolymer Chemistry and Applications, Geopolymer Institute. [2nd ed.].
12. Elemam, W.E., Tahwia, A.M., Abdellatief, M., Youssf, O., and Kandil, M.A. (2023). Durability, Microstructure, and Optimization of High-Strength Geopolymer Concrete Incorporating Construction and Demolition Waste. Sustainability, 15.10.3390/su152215832 ↗
13. Strength and stiffness performance of geopolymer stabilized washed recycled sands derived from demolition wastes in pavement subgrades10.1016/j.conbuildmat.2023.130618 ↗
14. A comprehensive review on performance of cementitious and geopolymeric concretes with recycled waste glass as powder, sand or cullet10.1016/j.resconrec.2021.105664 ↗
15. Yashwanth Reddy, M., and Harihanandh, M. (2023). Experimental studies on strength and durability of alkali activated slag and coal bottom ash based geopolymer concrete. Mater. Today Proc.10.1016/j.matpr.2023.03.644 ↗
16. Feasibility analysis of the preparation of geopolymers from different types of coal based ash: Reaction, synthesis, and properties
17. Green transformation of oily sludge through geopolymer: Material properties and hydration mechanisms10.1016/j.chemosphere.2024.143132 ↗
18. Hoe-Woon, T., Cheng-Yong, H., Yun-Ming, L., Qi-Hwa, N., Wei-Ken, P., Chin-Yii, Y., Jia-Ni, L., and Yong-Jie, H. (J. Ind. Eng. Chem., 2024). Assessing viability and leachability in fly ash geopolymers incorporated with rubber sludge, J. Ind. Eng. Chem.10.1016/j.jiec.2024.07.057 ↗
19. Effect of synthesis conditions on mechanical properties and microstructure of coal gasification slag-based geopolymer10.1016/j.conbuildmat.2024.137736 ↗
20. Optimization of geotechnical characteristics of clayey soils using fly ash and granulated blast furnace slag-based geopolymer10.1016/j.conbuildmat.2024.137488 ↗
21. Influence of ground granulated blast furnace slag on recycled concrete powder-based geopolymer cured at ambient temperature: Rheology, mechanical properties, reaction kinetics and air-void characteristics10.1016/j.conbuildmat.2024.137190 ↗
22. Mine wastes based geopolymers: A critical review10.1016/j.clet.2020.100014 ↗
23. Combined preparation and application of geopolymer pavement materials from coal slurry-slag powder-fly ash mining solid waste: A case study10.1016/j.conbuildmat.2024.137510 ↗
24. Developing zero carbon emission pavements with geopolymer concrete: A comprehensive review10.1016/j.trd.2022.103436 ↗
25. Geopolymer concrete: Sustainable green concrete for reduced greenhouse gas emission—A review10.1016/j.matpr.2021.11.588 ↗
26. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
27. Utilisation of fly ash in a geopolymeric material10.1016/S0883-2927(02)00005-7 ↗
28. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
29. Comparative study on the characteristics of fly ash and bottom ash geopolymers10.1016/j.wasman.2008.06.023 ↗
30. Compressive strength and microstructural characteristics of class C fly ash geopolymer10.1016/j.cemconcomp.2009.11.003 ↗
31. Utilization of blended fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash in geopolymer10.1016/j.wasman.2009.09.040 ↗
32. Properties of geopolymer with seeded fly ash and rice husk bark ash10.1016/j.msea.2011.06.027 ↗
33. Utilization of industrial and agricultural waste materials for the development of geopolymer concrete—A review10.1016/j.matpr.2022.04.192 ↗
34. Geopolymer technology: The current state of the art10.1007/s10853-006-0637-z ↗
35. Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
36. CO2 avoidance cost of fly ash geopolymer concrete10.1016/j.conbuildmat.2024.135193 ↗
37. The durability of slag and tannery sludge based geopolymer corroded by acid and base solutions10.1016/j.conbuildmat.2024.136746 ↗
38. Panias, D., and Giannopoulou, I. (2004). Geopolymers: A New Generation of Inorganic Polymeric Novel Materials. In Proceedings of the 1st International Conference on Advances in Mineral Resources Management and Environmental Geotechnology, Hania, Greece, 7–9 June 2004, National Technical University of Athens. AMIREG.
39. A comprehensive review of synthesis kinetics and formation mechanism of geopolymers10.1039/D3RA06205H ↗
40. Alkaline activation of metakaolin and calcium hydroxide mixtures: Influence of temperature, activator concentration and solids ratio10.1016/S0167-577X(00)00212-3 ↗
41. The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers10.1016/S1385-8947(02)00025-6 ↗
42. Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer10.1016/j.conbuildmat.2009.12.023 ↗
43. Effect of calcium silicate sources on geopolymerisation10.1016/j.cemconres.2007.11.001 ↗
44. Dilatometry of geopolymers as a means of selecting desirable fly ash sources10.1016/j.jnoncrysol.2012.06.001 ↗
45. Construction Wastes as Raw Materials for Geopolymer Binders
46. Coal fly ash as raw material for the manufacture of geopolymer-based products10.1016/j.wasman.2007.02.001 ↗
47. Arora, S., Jangra, P., Pham, T.M., and Lim, Y.Y. (2022). Enhancing the Durability Properties of Sustainable Geopolymer Concrete Using Recycled Coarse Aggregate and Ultrafine Slag at Ambient Curing. Sustainability, 14.10.3390/su141710948 ↗
48. Characterisation of fly ashes. Potential reactivity as alkaline cements10.1016/S0016-2361(03)00194-7 ↗
49. Effect of silicate activator pH on the leaching and material characteristics of waste-based inorganic polymers10.1016/S0892-6875(01)00002-4 ↗
50. Durability of red mud-fly ash based geopolymer and leaching behavior of heavy metals in sulfuric acid solutions and deionized water10.1016/j.conbuildmat.2016.07.108 ↗
51. Removal of harmful components from MSWI fly ash as a pretreatment approach to enhance waste recycling10.1016/j.wasman.2022.06.041 ↗
52. Promotion of chloride removal from MSWI fly ash by an accelerated wet-carbonation process to enhance ash recycling in cement manufacture10.1016/j.jece.2024.112591 ↗
53. Effects of water, acid, or alkali washing on Waste-to-Energy (WTE) bottom ash, fly ash, and combined ash10.1016/j.jece.2024.111936 ↗
54. Physicochemical and pozzolanic properties of municipal solid waste incineration fly ash with different pretreatments10.1016/j.wasman.2023.02.016 ↗
55. Potential and durability of supplementary cementitious material prepared by incineration fly ash: Co-sintering and water-washing treatment10.1016/j.cej.2024.153992 ↗
56. Improve toxicity leaching, physicochemical properties of incineration fly ash and performance as admixture by water washing10.1016/j.conbuildmat.2023.131568 ↗
57. Immobilization of MSWI fly ash through geopolymerization: Effects of water-wash10.1016/j.wasman.2010.05.015 ↗
58. Optimization of the solidification/stabilization process of MSW fly ash in cementitious matrices10.1016/S0304-3894(99)00132-6 ↗
59. Disposal of MSWI fly ash through a combined washing-immobilisation process10.1016/S0304-3894(02)00359-X ↗
60. Effect of Si/Al molar ratio on the strength behavior of geopolymer derived from various industrial waste: A current state of the art review10.1016/j.conbuildmat.2022.127134 ↗
61. Can washing-pretreatment eliminate the health risk of municipal solid waste incineration fly ash reuse?10.1016/j.ecoenv.2014.09.030 ↗
62. Direct evidence for the mechanism of early-stage geopolymerization process
63. Metakaolin based geopolymer mortar as concrete repairs: Bond strength and degradation when subjected to aggressive environments10.1016/j.ceramint.2022.05.004 ↗
64. Resistance of geopolymer materials to acid attack10.1016/j.cemconres.2004.06.005 ↗
65. Effect of mix parameters on chloride content, sulfate ion concentration, and microstructure of geopolymer concrete10.1016/j.conbuildmat.2024.136864 ↗
66. Resistance and durability of fly ash based geopolymer for heavy metal immobilization: Properties and mechanism10.1039/D4RA00617H ↗
67. How acid attack and high temperature affect the microstructure of adsorbent geopolymers10.1016/j.oceram.2023.100532 ↗
68. Evaluation of accelerated degradation test methods for cementitious composites subject to sulfuric acid attack; application to conventional and alkali-activated concretes10.1016/j.cemconcomp.2017.12.015 ↗
69. Tian, Q., Bai, Y., Pan, Y., Chen, C., Yao, S., Sasaki, K., and Zhang, H. (2022). Application of Geopolymer in Stabilization/Solidification of Hazardous Pollutants: A Review. Molecules, 27.10.3390/molecules27144570 ↗
70. Review of MSWI bottom ash utilization from perspectives of collective characterization, treatment and existing application10.1016/j.rser.2017.05.044 ↗
71. Effect of heavy metals immobilization on the properties of alkali activated slag mortars
72. Experimental study and modelling of lead solubility as a function of pH in mixtures of ground waters and cement waters10.1016/S0043-1354(01)00307-4 ↗
73. Grba, N., Grengg, C., Petronijević, M., Dietzel, M., and Baldermann, A. (2023). Substantial Copper (Cu2+) Uptake by Metakaolin-Based Geopolymer and Its Resistance to Acid Leaching and Ion Exchange. Polymers, 15.10.3390/polym15081971 ↗
74. Immobilization efficiency and mechanism of metal cations (Cd2+, Pb2+ and Zn2+) and anions (AsO43− and Cr2O72−) in wastes-based geopolymer10.1016/j.jhazmat.2019.121290 ↗
75. Immobilization of toxic inorganic anions (Cr2O72−, MnO4− and Fe(CN)63−) in metakaolin based geopolymers: A preliminary study10.1016/j.ceramint.2017.12.208 ↗