journal article·2024-11-13Open access

Investigation of the Thermophysical Simulation and Material Removal Mechanism of the High-Volume-Fraction SiCp/Al Composite in Wire Electrical Discharge Machining

Zhi Chen, Jiawen Hu, Hongbing Zhou, Yumeng Wei, Guojun Zhang, Fenglin Han

Materials· Volume 17· Issue 22

Abstract

SiC particle reinforced aluminum matrix composites (SiCp/Al) are widely used in aviation, weaponry, and automobiles because of their excellent service performance. Wire electrical discharge machining (WEDM) regardless of workpiece hardness has become an alternative method for processing SiCp/Al composites. In this paper, the temperature distribution and the discharge crater size of the SiCp/Al composite are simulated by a thermophysical model during a single-pulse discharge process (SPDP) based on the random distribution of SiC particles. The material removal mechanism of the SiCp/Al composite during the multi-pulse discharge process (MPDP) is revealed, and the surface roughness (Ra) of the SiCp/Al composite is predicted during the MPDP. The thermophysical model simulation results during the MPDP and experimental characterization data indicate that the removal mechanism of SiCp/Al composite material consists of the melting and vaporization of the aluminum matrix, as well as the heat decomposition and shedding of silicon carbide particles. Pulse-on time (Ton), pulse-off time (Toff), and servo voltage (SV) have a great influence on surface roughness. The Ra increases with an increase in Ton and SV, but decreases slightly with an increase in Toff. Moreover, compared with experimental data, the relative error of Ra calculated from the thermophysical model is 0.47–7.54%. This means that the developed thermophysical model has a good application and promotion value for the WEDM of metal matrix composite material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Aluminum Alloys Composites Properties · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China

Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization, Guangdong HUST Industrial Technology Research Institute, Dongguan 523808, China

Funding

the Natural Science Foundation of Hunan Province, China · the Natural Science Foundation of Changsha City, China · Fundamental Research Funds for the Central Universities of Central South University · the Guangdong Basic and Applied Basic Research Foundation, China · the State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University · the Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization

References (46)

Show source-provided references
1. An enhanced finite element model considering multi strengthening and damage mechanisms in particle reinforced metal matrix composites10.1016/j.compstruct.2019.111281 ↗
2. Developments in the aluminum metal matrix composites reinforced by micro/nano particles-A review10.1177/0021998319865307 ↗
3. Subcritical crack growth in zirconia-toughened alumina (ZTA) ceramics10.1016/j.jmatprotec.2005.04.030 ↗
4. Innovative and novel manufacturing methods of ceramics and metal-ceramic composites for biomedical applications10.1016/j.jeurceramsoc.2015.12.020 ↗
5. Multi-objective parametric optimization of nano powder mixed electrical discharge machining of SiCp/Al using response surface methodology and particle swarm optimization10.1016/j.aej.2017.02.006 ↗
6. Precision milling of high volume fraction SiCp/Al composites with monocrystalline diamond end mill10.1007/s00170-013-5494-8 ↗
7. Developments in the non-traditional machining of particle reinforced metal matrix composites10.1016/j.ijmachtools.2014.07.003 ↗
8. A method to predict possibility of arcing in EDM of TiB2p reinforced ferrous matrix composite10.1007/s00170-016-8414-x ↗
9. Electrochemical discharge machining: A review on preceding and perspective research10.1177/0954405418798865 ↗
10. A comprehensive review of electric discharge machining of advanced ceramics10.1016/j.ceramint.2020.05.207 ↗
11. Electrical Discharge Machining of Al(6351)-SiC-B4C Hybrid Composite10.1080/10426914.2014.952024 ↗
12. Surface Integrity Associated with SiC/Al Particulate Composite by Micro-Wire Electrical Discharge Machining
13. Experimental Investigation, Predictive Modeling, Parametric Optimization and Cost Analysis in Electrical Discharge Machining of Al-SiC Metal Matrix Composite10.1007/s12633-020-00482-6 ↗
14. Influence of Input Parameters on Machining Performances of Slotted-Electrical Discharge Abrasive Grinding of Al/SiC/Gr Metal Matrix Composite10.1080/10426914.2013.832300 ↗
15. Mathematical modeling of electric discharge machining of cast Al-4Cu-6Si alloy-10wt.% SiCp composites10.1016/j.jmatprotec.2007.03.121 ↗
16. Electric discharge machining of Al-SiC metal matrix composites using rotary tube electrode10.1016/j.jmatprotec.2004.04.347 ↗
17. Shao, L., Xue, N., Li, W., Liu, S., Tu, Z., Chen, Y., Zhang, J., Dai, S., Liu, Q., and Shi, X. (2023). Effect of Cold-Spray Parameters on Surface Roughness, Thickness and Adhesion of Copper-Based Composite Coating on Aluminum Alloy 6061 T6 Substrate. Processes, 11.10.3390/pr11030959 ↗
18. Development of Phase-Field Modeling in Materials Science in China: A Review10.1007/s40195-023-01593-w ↗
19. Thermal simulation of machining of alumina with wire electrical discharge machining process using assisting electrode10.1007/s12206-017-1233-7 ↗
20. Multi-spark model for predicting surface roughness of electrical discharge textured surfaces10.1007/s00170-019-04841-5 ↗
21. Development of a thermo-physical model for multi-spark wire EDM process10.1016/j.promfg.2016.08.019 ↗
22. Modelling functionally graded materials in heat transfer and thermal stress analysis by means of graded finite elements10.1016/j.apm.2017.01.005 ↗
23. Thermo-electrical coupling simulation of powder mixed EDM SiC/Al functionally graded materials10.1007/s00170-019-04445-z ↗
24. Numerical and experimental study on WEDM of BN-AlN-TiB2 composite ceramics based on a fusion FEM model10.1016/j.jmapro.2022.02.013 ↗
25. Machining of metal matrix composites: Effect of ceramic particles on residual stress, surface roughness and chip formation10.1016/j.ijmachtools.2008.07.008 ↗
26. Silicon carbide ceramics: Mechanical activation, combustion and spark plasma sintering10.1016/j.ceramint.2016.05.018 ↗
27. A review of two-step sintering for ceramics10.1016/j.ceramint.2016.05.065 ↗
28. Improvement of the machining characteristics in WEDM based on specific discharge energy and magnetic field-assisted method10.1007/s00170-019-03781-4 ↗
29. EDM multi-pulse temperature field simulation of SiC/Al functionally graded materials10.1007/s00170-018-2136-1 ↗
30. A numerical model and computer simulation for machining particle reinforced metal matrix composites in electric discharge machining
31. Study of the thermal erosion, ejection and solidification processes of electrode materials during EDM
32. A hybrid process model for EDM based on finite-element method and Gaussian process regression10.1007/s00170-014-5989-y ↗
33. Modeling and optimization of laser beam percussion drilling of thin aluminum sheet10.1016/j.optlastec.2012.10.035 ↗
34. Theoretical models of the electrical discharge maching process. I. A simple cathode crosion model10.1063/1.343994 ↗
35. Simulation of temperature distribution and discharge crater of SiCp/Al composites in a single-pulsed arc discharge10.1016/j.cja.2020.05.033 ↗
36. Investigation on the geometric evolution of microstructures in EDM with a composite laminated electrode10.1016/j.jclepro.2021.126765 ↗
37. Effect of wire electric discharge machining (EDM) parameters on fatigue life of Ti-6Al-4V alloy10.1016/j.ijfatigue.2019.105186 ↗
38. Effects of dielectric fluids on surface integrity for the recast layer in high speed EDM drilling of nickel alloy10.1016/j.jallcom.2018.12.283 ↗
39. Employing Ti nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D2 steel10.1016/j.apsusc.2015.09.105 ↗
40. Research of the recast layer on implant surface modified by micro-current electrical discharge machining using deionized water mixed with titanium powder as dielectric solvent10.1016/j.apsusc.2014.04.204 ↗
41. Effects of spraying parameters and heat treatment temperature on microstructure and properties of single-pass and single-layer cold-sprayed Cu coatings on Al alloy substrate10.1016/j.surfcoat.2024.131184 ↗
42. Effect of SiCi(x)O(y) decomposition on densification of SiCO(Al) fibers during sintering process
43. Machining characteristics of 65 vol.% SiCp/Al composite in micro-WEDM10.1016/j.ceramint.2021.01.212 ↗
44. Electrical discharge machining of functionally graded 15–35 vol% SiCp/Al composites10.1080/10426910500471482 ↗
45. Thakur, S.S., Pradhan, S.K., Mehrotra, D., and Sehgal, S. (2023). Experimental investigation of powder mixed electrical discharge machining of LM-25/SiC composites: A response surface methodology coupled with desirability approach. Aust. J. Mech. Eng.10.1080/14484846.2023.2215497 ↗
46. Grigoriev, S.N., Volosova, M.A., Okunkova, A.A., Fedorov, S.V., Hamdy, K., and Podrabinnik, P.A. (2021). Elemental and Thermochemical Analyses of Materials after Electrical Discharge Machining in Water: Focus on Ni and Zn. Materials, 14.10.3390/ma14123189 ↗