A Comparative Study of Precision Surface Grinding Using Additively Fabricated Acrylonitrile–Butadiene–Styrene (ABS) Wheels with Continuous and Serrated Working Surfaces
Source abstract
Abstract
Nowadays, high requirements imposed by mechanical components make it necessary to develop modern production methods. Additive technologies have been dynamically developing in recent years, showing many advantages associated with the fabrication of elements with complex geometries and structures. One of the areas where the potential of additive technologies is exploited is the rapid tooling sector, which is based on the rapid production of tools and components used in various manufacturing methods. Currently, apart from industrial additive fabrication using metal and plastic powders, desktop and low-cost devices for additive manufacturing are gaining more and more importance in the production of functional elements. This paper presents the experimental results obtained from testing the micro-abrasive acrylonitrile–butadiene–styrene ABS tools fabricated by fused filament fabrication (FFF) technology and reinforced with SD 28/20 diamond grains uniformly distributed on the working surface of the tools after they were made. Precision surface grinding operations of 41Cr4 alloy steel were carried out on a portable five-axis CNC milling machine using wheels with continuous and serrated working surfaces. The tool with a serrated working surface enabled a more efficient material removal and produced a better surface finish. In particular, a low wear rate of both FFF-printed tools was confirmed after all experiments. Promising results were obtained, showing the potential for a wider industrial application of the tested tools.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering and Ship Technology, Department of Manufacturing and Production Engineering, Institute of Machine and Materials Technology, Gdańsk University of Technology, G. Narutowicza Str. 11/12, 80-233 Gdańsk, Poland
Funding
GDAŃSK TECH CORE EDU FACILITIES · European Commission
References (40)
Show source-provided references
1. Noorani, R. (2017). 3D Printing: Technology, Applications, and Selection, CRC Press.10.1201/9781315155494 ↗
2. (2015). Standard Terminology for Additive Manufacturing–General Principles–Terminology (Standard No. ISO/ASTM52900-15).
3. (2014). Additive Manufacturing Processes, Rapid Manufacturing-Basics, Definitions, Processes (Standard No. VDI 3405).
4. Application of Rapid Prototyping technology in the manufacturing of turbine blade with small diameter holes10.2478/pomr-2018-0032 ↗
5. Multi-criteria comparative analysis of the use of subtractive and additive technologies in the manufacturing of offshore machinery components10.2478/pomr-2020-0048 ↗
6. The research status and development trend of additive manufacturing technology10.1007/s00170-016-9335-4 ↗
7. Printing of durable thermoplastic elements using FDM/FFF technology
8. Three-dimensional printing of abrasive, hard, and thermally conductive synthetic microdiamond–polymer composite using low-cost fused deposition modeling printer10.1021/acsami.8b18232 ↗
9. Advances in grinding tools and abrasives10.1016/j.cirp.2022.05.003 ↗
10. Deja, M., Zieliński, D., Kadir, A.Z.A., and Humaira, S.N. (2021). Applications of Additively Manufactured Tools in Abrasive Machining—A Literature Review. Materials, 14.10.3390/ma14051318 ↗
11. A review on the production of grinding tools through additive manufacturing processes: From current possibilities to future perspectives10.1080/10910344.2023.2253027 ↗
12. Model-based manufacturing and application of metal-bonded grinding wheels10.1016/j.cirp.2019.04.088 ↗
13. Additive manufacturing of metal-bonded grinding tools10.1007/s00170-020-05199-9 ↗
14. Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM)10.1007/s00170-018-2734-y ↗
15. Study on formability, mechanical property and finite element modeling of 3D-printed composite for metal-bonded diamond grinding wheel application10.1016/j.jmapro.2020.02.028 ↗
16. A study on diamond grinding wheels with regular grain distribution using additive manufacturing (AM) technology10.1016/j.matdes.2016.04.104 ↗
17. The influence of diamond content on the formability and mechanical properties of additively manufactured metal-bonded diamond tools10.1007/s00170-024-13103-y ↗
18. Williams, W.B. (2013, January 15). Additive manufacturing of tools for lapping glass. Proceedings of the Optifab 2013, Rochester, NY, USA.10.1117/12.2028699 ↗
19. Guo, L., Zhang, X., Chen, S., and Hui, J. (2019). An experimental study on the precision abrasive machining process of hard and brittle materials with ultraviolet-resin bond diamond abrasive tools. Materials, 12.10.3390/ma12010125 ↗
20. Digital light processing-based additive manufacturing of resin bonded SiC grinding wheels and their grinding performance10.1007/s00170-021-08016-z ↗
21. Williams, W.B. (2015, January 12–15). The impact of layer thickness on the performance of additively manufactured lapping tools. Proceedings of the Optifab 2015, Rochester, NY, USA.10.1117/12.2195995 ↗
22. Tailored bond characteristics in additively manufactured resin bond grinding wheels: Achieving optimal performance, high abrasive concentration, and cost efficiency
23. Habel, A., Barmouz, M., Steinhäuser, F., and Azarhoushang, B. (2004). Influence of Additives on Grinding Performance of Digital Light Processing-Printed Phenol Bond Grinding Wheels. Appl. Sci., 14.10.3390/app14177711 ↗
24. Influence of bond thermal and mechanical properties on the additively manufactured grinding wheels performance: Mechanical, wear, surface integrity, and topography analysis
25. Progress in grinding performance by additive manufacturing of grinding wheels integrated with internal venturi cooling channels and surface slots10.1016/j.jmapro.2023.05.078 ↗
26. Selective laser sintering and grinding performance of resin bond diamond grinding wheels with arrayed internal cooling holes10.1016/j.ceramint.2019.07.076 ↗
27. Deja, M., and Zieliński, D. (2021). A Pilot Study on Machining Difficult-to-Cut Materials with the Use of Tools Fabricated by SLS Technology. Materials, 14.10.3390/ma14185306 ↗
28. Study on the wear characteristics of a 3D printed tool in flat lapping of Al2O3 ceramic materials
29. Sandhu, K., Singh, G., Singh, S., Kumar, R., Prakash, C., Ramakrishna, S., Królczyk, G., and Pruncu, C.I. (2020). Surface characteristics of machined polystyrene with 3D printed thermoplastic tool. Materials, 13.10.3390/ma13122729 ↗
30. Material extrusion-based additive manufacturing of zirconia toughened alumina: Machinability, mechanical properties and biocompatibility10.1016/j.jmapro.2023.03.052 ↗
31. Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures10.1016/j.compositesb.2016.05.038 ↗
32. From the development of low-cost filament to 3D printing ceramic parts obtained by fused filament fabrication10.1007/s00170-023-11849-5 ↗
33. On fabrication of acrylonitrile butadiene styrene-zirconium oxide composite feedstock for 3D printing-based rapid tooling applications10.1177/08927057231186310 ↗
34. Knauf, M., Katzer, F., Henkel, S., Wille, T., Bliedtner, J., Gerhardt, M., and Kerber, A. (2024, January 30). Development of individually designed, additively manufactured fine grinding tools with a hybrid bond for processing inorganic, non-metallic materials. Proceedings of the SPIE—The International Society for Optical Engineering, Eleventh European Seminar on Precision Optics Manufacturing, 132210F, Böbrach, Germany.10.1117/12.3030971 ↗
35. Thermal and technological aspects of double face grinding of Al2O3 ceramic materials10.1016/j.ceramint.2019.06.206 ↗
36. Thermal and technological aspects of double face grinding of C45 carbon steel10.1016/j.jmapro.2021.02.023 ↗
37. Pasta-Diamentowa.pl (2024, November 19). Available online: https://pasta-diamentowa.pl/p/pasta-polerska-do-metalu/.
38. (1990). Metrology of Surfaces; Profile Filters for Electrical Contact Stylus Instruments; Phasecorrected Filters (Standard No. DIN 4777).
39. (2012). Geometrical Product Specifications (GPS)—Surface Texture: Area—Part 2: Terms, Definitions and Surface Texture Parameters (Standard No. ISO 25178).
40. Metrological aspects of surface topographies produced by different machining operations regarding their potential functionality10.1515/mms-2017-0027 ↗