journal article·2024-12-18Open access

Application of Powder-Bed Fusion of Metals Using a Laser for Manufacturing of M300 Maraging Steel Tools Intended for Sheet Metal Bending

Krzysztof Żaba, Maciej Balcerzak, Łukasz Kuczek, Marcel Wiewióra, Ilona Różycka, Tomasz Trzepieciński, Jarosław Mizera

Materials· Volume 17· Issue 24

Abstract

This paper presents the results of a pilot application of Powder-Bed Fusion of Metals Using a Laser (PBF-LB/M) for the fabrication of M300 (1.2709) maraging steel sheet metal bending tools. S235 steel was used as a substrate for the fabrication of bending punches. The main goal of the research was to determine the usability of such tools without heat treatment, which would contribute to the increase in the cost of tool production. Industrial tests of tools were conducted during the forming of Inconel 625 and AW-6061 T0 aluminium alloy sheets. The punches were subjected to tests of surface roughness, hardness, microstructure, porosity, and geometric quality in order to verify the quality and accuracy of tools made by the PBF-LB/M technique before and after experimental investigations in industrial conditions in a selected manufacturing company. It was found that tools with an M300 steel working layer after the PBF-LB/M process without heat treatment show suitability for bending sheet metal in a certain range of force parameters, ensuring obtaining elements after bending from Inconel 625 and AW-6061 T0 aluminium alloy sheets of the required geometric quality.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metal Working and Physical Metallurgy of Non-Ferrous Metals, Faculty of Non-Ferrous Metals, AGH University of Krakow, Al. Adama Mickiewicza 30, 30-059 Cracow, Poland

ERKO sp. z o.o. sp.k., Czeluśnica 80, 38-204 Jasło, Poland

Department of Materials Science and Engineering of Non-Ferrous Metals, Faculty of Non-Ferrous Metals, AGH University of Krakow, Al. Adama Mickiewicza 30, 30-059 Cracow, Poland

Department of Manufacturing Processes and Production Engineering, Rzeszów University of Technology, 8 Powstancow Warszawy Ave., 35-959 Rzeszow, Poland

Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507 Warsaw, Poland

References (77)

Show source-provided references
1. Frohn-Sörensen, P., Geueke, M., Engel, B., Löffler, B., Bickendorf, P., Asimi, A., Bergweiler, G., and Schuh, G. (2022). Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling. Polymers, 14.10.3390/polym14091694 ↗
2. A cost-effective method for rapid manufacturing sheet metal forming dies10.1007/s00170-015-8139-2 ↗
3. Trzepieciński, T. (2020). Recent Developments and Trends in Sheet Metal Forming. Metals, 10.10.3390/met10060779 ↗
4. Analysis of Tribological Performance of New Stamping Die Composite Inserts Using Strip Drawing Test
5. Pokojski, J., Gil, M., Newnes, L., Wognum, N., and Stjepandic, J. (2020). Stamping Tools for Sheet Metal Forming: Current State and Future Research Directions. Transdisciplinary Engineering for Complex Socio-Technical Systems–Real-Life Applications, IOP Press.
6. (2024, June 04). Zastosowania Druku 3D Dla Stali Narzędziowej. Available online: https://centrumdruku3d.pl/zastosowania-druku-3d-dla-stali-narzedziowej/.
7. Additive manufacturing tooling for the automotive industry10.1007/s00170-017-0239-8 ↗
8. Comparison of sheet-metal-forming simulation and try-out tools in the design of a forming tool10.1080/09544820410001697598 ↗
9. Tondini, F., Basso, A., Arinbjarnar, U., and Nielsen, C.V. (2021). The Performance of 3D Printed Polymer Tools in Sheet Metal Forming. Metals, 11.10.3390/met11081256 ↗
10. Towards the Digital Model of Tool Lifecycle Management in Sheet Metal Forming
11. (2024, June 04). CNC vs Additive Manufacturing (AM): 3 Scenarios Where AM Wins. Available online: https://www.stratasys.com/en/resources/blog/cnc-vs-additive-manufacturing-am-3-scenarios-where-am-wins/.
12. Wear processes in hot forging press tools10.1016/0261-3069(96)00010-6 ↗
13. A systematic review of additive manufacturing-based remanufacturing techniques for component repair and restoration10.1016/j.jmapro.2023.01.034 ↗
14. Advanced additive remanufacturing technology
15. Comparative study of co-based alloys in repairing low Cr-Mo steel components by laser cladding10.1016/j.phpro.2012.10.050 ↗
16. Remanufacture of hot forging tools and dies using laser metal deposition with powder and a hard-facing alloy Stellite 21®10.1007/s13243-018-0063-9 ↗
17. An investigation on the suitability of different welding recovery procedures for cold stamping punches in VF800AT steel10.1007/s00170-024-13540-9 ↗
18. Pater, Z., and Samołyk, G. (2013). Podstawy Technologii Obróbki Plastycznej Metali, Politechnika Lubelska.
19. Opportunities and Challenges in Metal Forming for Lightweighting: Review and Future Work10.1115/1.4047732 ↗
20. Pająk, E. (2016). Obróbka ubytkowa. Technologia Obróbki Wiórowej, Ściernej i Erozyjnej oraz Systemów Mikroelektromechanicznych, Wydawnictwo PWSZ w Koninie.
21. Hybrid Additive Manufacturing of Forming Tools10.1007/s42154-023-00239-y ↗
22. Performance improvement of hot stamping die for patchwork blank using mixed cooling channel designs with straight and conformal channels10.1016/j.applthermaleng.2019.114562 ↗
23. Review on additive manufacturing of tooling for hot stamping10.1007/s00170-020-05622-1 ↗
24. Tool steels for hot stamping of high strength automotive body parts
25. Improving the Productivity of Sheet Metal Stamping Subassembly Area Using the Application of Lean Manufacturing Principles10.1016/j.promfg.2015.07.090 ↗
26. Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools10.1051/matecconf/20152105009 ↗
27. Surface Treatment for Improving Selected Physical and Functional Properties of Tools and Machine Parts—A Review10.35995/jame60010003 ↗
28. Thermochemical treatment of tools for hot forging10.1007/BF02471230 ↗
29. Zhou, L., Miller, J., Vezza, J., Mayster, M., Raffay, M., Justice, Q., Al Tamimi, Z., Hansotte, G., Sunkara, L.D., and Bernat, J. (2024). Additive Manufacturing: A Comprehensive Review. Sensors, 24.10.3390/s24092668 ↗
30. Ponis, S., Aretoulaki, E., Maroutas, T.N., Plakas, G., and Dimogiorgi, K. (2021). A Systematic Literature Review on Additive Manufacturing in the Context of Circular Economy. Sustainability, 13.10.3390/su13116007 ↗
31. Asnafi, N. (2021). Metal Additive Manufacturing—State of the Art 2020. Metals, 11.10.3390/met11060867 ↗
32. Alfaify, A., Saleh, M., Abdullah, F.M., and Al-Ahmari, A.M. (2020). Design for Additive Manufacturing: A Systematic Review. Sustainability, 12.10.3390/su12197936 ↗
33. Additive Manufacturing Methods: A Brief Overview
34. Wykorzystanie druku 3D w zastosowaniach automotive
35. (2024, June 06). Rodzaje Technologii Druku 3D. Available online: https://3dwpraktyce.pl/rodzaje-technologii-druku-3d/.
36. Obeidi, M.A., Healy, P., Alobaidi, H., Bourke, D., and Brabazon, D. (2024). Towards a Sustainable Laser Powder Bed Fusion Process via the Characterisation of Additively Manufactured Nitinol Parts. Designs, 8.10.3390/designs8030045 ↗
37. Guan, J., and Wang, Q. (2023). Laser Powder Bed Fusion of Dissimilar Metal Materials: A Review. Materials, 16.10.3390/ma16072757 ↗
38. Effect of argon and nitrogen atmospheres on the properties of stainless steel 316 L parts produced by laser-powder bed fusion10.1016/j.matdes.2019.107873 ↗
39. An Overview Of Direct Metal Laser Sintering (DMLS) Technology For Metal 3D Printing10.18311/jmmf/2022/30681 ↗
40. Laser powder bed fusion for metal additive manufacturing: Perspectives on recent developments10.1080/17452759.2020.1779999 ↗
41. State-of-the-art of selective laser melting process: A comprehensive review10.1016/j.jmsy.2022.04.002 ↗
42. Direct metal printing of 3D electrical circuit using rapid prototyping
43. Review on 3D printing techniques for cutting tools with cooling channels10.1016/j.heliyon.2023.e22557 ↗
44. A detailed study on optimizing DMLS process parameters to enhance AlSi10Mg metal component properties10.1186/s44147-024-00514-7 ↗
45. Gao, B., Zhao, H., Peng, L., and Sun, Z. (2023). A Review of Research Progress in Selective Laser Melting (SLM). Micromachines, 14.10.3390/mi14010057 ↗
46. Metallic materials fabrication by selective laser melting: A review10.1016/j.matpr.2020.05.162 ↗
47. Cobbinah, P.V., Nzeukou, R.A., Onawale, O.T., and Matizamhuka, W.R. (2021). Laser Powder Bed Fusion of Potential Superalloys: A Review. Metals, 11.10.3390/met11010058 ↗
48. A review on microstructures and properties of high entropy alloys manufactured by selective laser melting10.1088/2631-7990/ab9ead ↗
49. Additive manufacturing: A framework for implementation10.1016/j.ijpe.2013.07.008 ↗
50. Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review10.1016/j.ijmachtools.2018.06.003 ↗
51. Kruth, J.-P., Badrossamay, M., Yasa, E., Deckers, J., Thijs, L., and Van Humbeeck, J. (2010, January 19–23). Part and material properties in selective laser melting of metals. Proceedings of the 16th International Symposium on Electromachining, Shanghai, China.
52. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties10.1016/j.pmatsci.2015.03.002 ↗
53. Review of selective laser melting: Materials and applications10.1063/1.4935926 ↗
54. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
55. Laser polishing of parts built up by selective laser sintering10.1016/j.ijmachtools.2007.01.013 ↗
56. On the microstructure, hardness and wear behavior of Al-Fe-Cr quasicrystal reinforced Al matrix composite prepared by selective laser melting10.1016/j.matdes.2017.06.060 ↗
57. The investigation of the influence of laser remelting on density, surface quality and microstructure of selective laser melting parts10.1108/13552541111156450 ↗
58. (2009). Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature (Standard No. EN ISO 6892-1).
59. Czapla, K., Żaba, K., Kot, M., Nejman, I., Madej, M., and Trzepieciński, T. (2023). Tribological Performance of Anti-Wear Coatings on Tools for Forming Aluminium Alloy Sheets Used for Producing Pull-Off Caps. Materials, 16.10.3390/ma16196465 ↗
60. (2018). Metallic Materials—Vickers Hardness Test Part 1—Test Method (Standard No. ISO 6507-1).
61. Review on Galling of Aluminum in Cold Forming Processes
62. Numerical prediction of the galling of aluminium alloys in cold strip drawing10.1016/j.jmapro.2021.11.008 ↗
63. Wear-resistance and hardness: Are they directly related for nanostructured hard materials?10.1016/j.ijrmhm.2014.06.017 ↗
64. Wear characteristics, reduction techniques and its application in automotive parts–A review10.1080/23311916.2023.2170741 ↗
65. Defect structure process maps for laser powder bed fusion additive manufacturing
66. Influence of powder morphology on laser absorption behavior and printability of nanoparticle-coated 90W-Ni-Fe powder during laser powder bed fusion10.18063/msam.v1i2.11 ↗
67. Brown, C.U., Jacob, G., Possolo, A.M., Beauchamp, C.R., Peltz, M.A., Stoudt, M.R., and Donmez, M.A. (2018). The Effects of Laser Powder Bed Fusion Process Parameters on Material Hardness and Density for Nickel Alloy 625. Advanced Manufacturing Series (NIST AMS), National Institute of Standards and Technology. Report number 100-19.10.6028/NIST.AMS.100-19 ↗
68. Asnafi, N. (2021). Application of Laser-Based Powder Bed Fusion for Direct Metal Tooling. Metals, 11.10.3390/met11030458 ↗
69. Design and validation of 3D-printed tools for stamping of DP60010.1088/1757-899X/651/1/012010 ↗
70. Mooney, B., and Kourousis, K.I. (2020). A Review if Factors Affecting the Mechanical Properties of Maraging Steel 300 Fabricated via Laser Powder Bed Fusion. Metals, 10.10.3390/met10091273 ↗
71. 3D Metal Printing from an Industrial Perspective—Product Design, Production, and Business Models10.1007/s00501-019-0827-z ↗
72. Production Tools Made by Additive Manufacturing Through Laser-based Powder Bed Fusion10.1007/s00501-020-00961-8 ↗
73. Punch Force Behavior during Micro V-Bending Process of the Copper Foil10.14716/ijtech.v8i7.747 ↗
74. Springback Problems in Forming of High-Strength Steel Sheets and Countermeasures
75. Guzmán-Flores, I., Granda-Gutiérrez, E.E., Cruz-González, C.E., Hernández-García, H.M., Díaz-Guillén, J.C., Flores-González, L., Praga-Alejo, R.J., and Martínez-Delgado, D.I. (2024). Enhancing the Mechanical Properties of a 6061 Aluminum Alloy by Heat Treatment from the Perspective of Taguchi Design-of-Experiments. Appl. Sci., 14.10.3390/app14135407 ↗
76. Optimizing the Heat Treatment Parameters of Al-6061 Required for Better Formability10.1016/j.matpr.2018.10.219 ↗
77. Influence of Heat Treatment on Mechanical and Corrosion Properties of Aluminium Metal Matrix Composites (AA 6061 Reinforced with MoS2)10.1016/j.matpr.2017.09.050 ↗