journal article·2024-12-26Open access

Effects of Moisture Infiltration on Interfacial Characteristics of Fiber Asphalt Mastic-Aggregate and the Cracking Resistance of Mixture

Keke Lou, Silin Jia, Peng Xiao, Haochen Wu, Yuhao Wu

Materials· Volume 18· Issue 1

Abstract

The interfacial properties of fiber asphalt aggregate and the cracking resistance of asphalt mixture are directly affected by moisture infiltration. In order to investigate the correlation between interfacial properties and immersion stability of asphalt mixture, three different types of fiber, including basalt fiber (BF), glass fiber (GF), and polyester fiber (PF); five types of fiber contents (0.1% to 0.5% by mass of the mixtures); and two types of aggregates (basalt and limestone) were selected. Experimental methods such as the Bond Strength Test (BBS), Disk-Shaped Compact Tension test (DCT), and interfacial image processing were used in order to assess the strength of interfacial interaction and resistance to cracking under both dry and wet conditions. The results showed that the addition of fibers could enhance fiber asphalt mastic-aggregate interfacial strength; under the influence of moisture infiltration, the interfacial strength showed a significant downward trend. In the process of fiber content increasing from 0.1% to 0.5%, the peak load and fracture energy of fiber asphalt mixtures were first increased and then decreased. The interface between asphalt mastic and aggregate is easier to spalling after being subjected to moisture infiltration, resulting in a decrease in cracking resistance. Compared with the dry environment, after moisture infiltration, the correlation index between interfacial strength and fracture energy is much higher than other influencing factors. The interfacial strength is still an important factor affecting the fracture energy. These findings provide valuable insights for the design and application of more durable asphalt pavement.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Civil Science and Engineering, Yangzhou University, Yangzhou 225100, China

Research Center for Basalt Fiber Composite Construction Materials, Yangzhou 225127, China

Funding

National Natural Science Foundation of China · Yangzhou Natural Science Foundation · China Postdoctoral Science Foundation

References (35)

Show source-provided references
1. A review and perspective for research on moisture damage in asphalt pavement induced by dynamic pore water pressure10.1016/j.conbuildmat.2019.01.167 ↗
2. Asphalt surface damage due to combined action of water and dynamic loading10.1016/j.conbuildmat.2018.10.225 ↗
3. Effects of water exposure on bitumen surface microstructure10.1016/j.conbuildmat.2017.01.002 ↗
4. A review on moisture damages of hot and warm mix asphalt and related investigations10.1016/j.jclepro.2015.03.028 ↗
5. Characterization of microstructural evolution of asphalt due to water damage using atomic force microscopy10.1016/j.conbuildmat.2024.137175 ↗
6. Evaluation for water stability of bitumen mixture with multi-scale method10.1016/j.conbuildmat.2023.134836 ↗
7. Exploring the short-term water damage characteristics of asphalt mixtures: The combined effect of salt erosion and dynamic water scouring10.1016/j.conbuildmat.2023.134310 ↗
8. Mechanical behaviors and meso analysis of asphalt mixtures under moisture damage induced by hydrodynamic impacts10.1016/j.conbuildmat.2024.137048 ↗
9. Study on pore structure evolution and water damage of asphalt mixture under cyclic loading10.1016/j.conbuildmat.2024.137461 ↗
10. Hui, Y., Men, G., Xiao, P., Tang, Q., Han, F., Kang, A., and Wu, Z. (2022). Recent Advances in Basalt Fiber Reinforced Asphalt Mixture for Pavement Applications. Materials, 15.10.3390/ma15196826 ↗
11. Mechanical performance of fibers in hot mix asphalt: A review10.1016/j.conbuildmat.2018.12.171 ↗
12. Performance characteristics of fiber modified hot mix asphalt10.1016/j.conbuildmat.2018.04.221 ↗
13. Recent development and application of natural fiber in asphalt pavement10.1016/j.jclepro.2024.141832 ↗
14. Influences of dispersion media for chemically modified cellulose nanofibers on rheological and mechanical properties of cellulose nanofiber reinforced high-density polyethylene10.1007/s10570-021-03824-8 ↗
15. A laboratory study of high-performance cold mix asphalt mixtures reinforced with natural and synthetic fibres10.1016/j.conbuildmat.2018.03.252 ↗
16. Review of interfacial adhesion between asphalt and aggregate based on molecular dynamics10.1016/j.conbuildmat.2022.129642 ↗
17. Evaluating the interfacial properties between crumb rubber modified asphalt and aggregates using molecular dynamics simulation methods10.1016/j.conbuildmat.2023.132809 ↗
18. Influence of aggregate mineralogical composition on water resistance of aggregate–bitumen adhesion10.1016/j.ijadhadh.2015.06.012 ↗
19. Investigation of Asphalt-Aggregate Interactions in Asphalt Pavements
20. Evaluation of adhesion properties of modified asphalt binders with use of binder bond strength test10.3141/2632-10 ↗
21. Impact of the chemical composition of aggregates on the adhesion quality and durability of asphalt-aggregate systems10.1016/j.conbuildmat.2019.05.030 ↗
22. Effect of Aging on Adhesion Properties of Asphalt Mixtures with the Use of Bitumen Bond Strength and Surface Energy Measurement Tests10.3141/2505-08 ↗
23. Low-temperature cohesive and adhesive strength testing of contact surface between bitumen and mineral aggregates by image analysis10.1016/j.conbuildmat.2018.06.169 ↗
24. Multiscale test research on interfacial adhesion property of cold mix asphalt10.1016/j.conbuildmat.2014.06.031 ↗
25. Using surface free energy method to study the cohesion and adhesion of asphalt mastic10.1016/j.conbuildmat.2013.05.067 ↗
26. Quantitative evaluation of organosilane-based adhesion promoter effect on bitumen-aggregate bond by contact angle test10.1016/j.ijadhadh.2016.10.015 ↗
27. Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling10.1007/s11043-016-9304-1 ↗
28. Effect of low dosage fiber reinforcement on cracking performance of asphalt concrete10.1016/j.conbuildmat.2023.134380 ↗
29. Investigation on characteristics and properties of bagasse fibers: Performances of asphalt mixtures with bagasse fibers10.1016/j.conbuildmat.2020.118648 ↗
30. Toughening mechanisms in polypropylene fiber-reinforced asphalt mastic at low temperature10.1016/j.conbuildmat.2020.118690 ↗
31. Investigation of fiber length distribution on crack resistance mechanism of basalt fiber asphalt mixture based on digital image processing technology10.1016/j.conbuildmat.2023.132753 ↗
32. Interfacial characteristics of fiber asphalt mastic and aggregates. Impact on mixture crack resistance performance10.1016/j.conbuildmat.2024.134866 ↗
33. Effect of chemical composition of aggregate on interfacial adhesion property between aggregate and asphalt10.1016/j.conbuildmat.2017.04.061 ↗
34. (2011). Test Rules for Asphalt and Asphalt Mixtures for Highway Engineering (Standard No. JTG E20-2011).
35. Engineering bitumen for future asphalt pavements: A review of chemistry, structure and rheology10.1016/j.matdes.2024.113157 ↗